Engine treatments

This zinc-based treatment (anti-friction lubricant) extends your engine's longevity by protecting the camshaft and tappets.
Modern oils do not have the same properties and the ZDDP content hasgreatly reduced.
This lack of ZDDP results in wear and deterioration ofcamshafts and tappets, causing, among other things, pitting on older engines (VW air-cooled, for example).

This Cam Shield additive retains a good level of ZDDP content and therefore effectively protects your camshaftand tappets. Assembly greases are also available.

With Cam Shield your camshafts, tappets, rocker arms, valve stems, etc. will finally be lubricated as they should be.

Contents: 88.5 ml, ideal to treat 4 to 5L of oil for a racing car or 8 to 10L for normal usage.

Warning: not suitable for cars fitted with a catalytic converter.

CURATIF METAL 5 80 ml is a remetallizing engine oil treatment that restores the original performance of 4-stroke engines running on gasoline (including hybrid, turbocharged...), diesel (DCI, CDTI, HDI, TDI, TDCI...) or LPG, while extending their service life.
It is compatible with all types of oil (mineral, semi-synthetic, 100% synthetic). It is also safe for catalytic converters and particulate filters.

Its technological formula, specially designed and recommended for all engines from 30,000kms upwards or at the first signs of premature wear, contains billion micro-particles of soft metals including copper, silver and zinc, which become embedded in the micro-porosities of surfaces as they pass through the engine oil. This compensates for wear on moving mechanical parts and remetallizes the engine, restoring a perfect ring/cylinder wall seal (rebalancing compressions).

Advantages :
- rapid action from 100kms after use, restoring your engine's optimum performance.
- extends engine life.
- reduces fuel and oil consumption.
- lowers pollution levels.

Dosage: 1 bottle of 80ml treats up to 6 liters of oil volume. This treatment is effective for 25,000kms.

Directions for use :
- When the engine is warm, add the Metal 5 Curatif bottle to the oil sump through the filler hole, after replacing the oil filter and topping up with new oil (or within the next 1000kms).

Please observe the following precautions

BARDHAL Hydraulic Tappet Additive 300ml is an engine oil treatment specially formulated to restore optimum operation of hydraulic tappets on 4-stroke engines running on gasoline (including hybrid, turbocharged...), diesel (DCI, CDTI, HDI, TDI, TDCI...) or LPG. It is compatible with all types of oil, and safe for catalytic converters and particulate filters.

It durably reduces clatter, noise, wear and eliminates deposits.

Advantages :
- reduces friction and fights premature wear on moving parts.
- high cleaning power (dissolves and eliminates impurities and gum deposits, preserving the efficiency of oil filters).
- reduces fuel consumption.
- improves flexibility.

Pour into engine oil when symptoms appear, or into new oil after oil change.

Dosage : 1 x 300 ml bottle treats up to 6 liters of oil.

Please observe safety precautions.

MECACYL CR100ml enginehyper-lubricant is a preventive and curative treatment suitable for all gasoline, diesel, hybrid and LPG engines and all types of oil.
Its high-tech form ofhyper-lubrication improves engine efficiency while reducing wear, increasing power and torque, reducing pollution and saving 8 to 15% on fuel.
What's more, its exclusive formula attenuates mechanical noise making the engine quieter and smoother for improved driving comfort.

Benefits :
- Reduced fuel consumption.
- Reduced engine wear.
- Quieter, smoother engine.
- Lower temperatures and endothermic reactions.
- Reduced pollution (easier to pass anti-pollution tests).
- Engine protection.

Dosage: 1 bottle of 100ml effectively treats 4 to 5 liters of oil volume.

Directions for use:
- After an oil change, with the engine at operating temperature, pour the contents of the bottle into the new oil via the crankcase filler hole (or add up to a maximum of 3000kms after an oil change).
- Drive or idle the engine for at least 10 minutes.

Information: White smoke comes out of the exhaust during the first 10 to 15 kilometers. This is perfectly normal, as MECACYL CR eliminates water and oxides.

Please take the appropriate precautions.

BARDAHL Rodent Repellent (400 ml ) is the solution for repelling rodents that like to feed on car cables and hoses.

It protects your car from martens, rats and mice that like to take refuge in engine compartments.
Its formula is designed not to damage plastics and rubbers.

BARDAHL 473ml Maxi compression additive has been developed to restore all the performance and optimum efficiency of 4-stroke engines running on petrol (including hybrid, turbocharged...), diesel (DCI, CDTI, HDI, TDI, TDCI...) or LPG. It is compatible with all types of oil, and safe for catalytic converters and particulate filters.

Its exclusive formula restores and rebalances cylinder compression, limits oil leaks by restoring elasticity to seals, and reduces excess oil consumption. Its function is preventive or curative.

Advantages :
- protects against cold-start wear.
- reinforces the oil film.
- improves power, responsiveness and acceleration.
- reduces engine noise.
- improves power and performance.
- does not clog the oil filter.

When to use it :
- loss of compression and oil pressure.
- loss of power at high rpm.
- excessive oil consumption.
- seepage and oil leaks.

Dosage : 1/2 bottle effectively treats up to 6 liters of oil volume (repeat treatment every 15,000 km).

Directions for use :
- with a warm engine, add 1/2 bottle to the oil sump through the filler opening when changing the oil or topping up.

Observe all safety precautions.

Mecacyl has developed an effective treatment to reduce the creaking and noice in hydraulic lifter valves,their 100ml CRP formula.
CRP retains all the qualities of CR.

Ideally you would use it any time bleeding is required.
- protects your hydraulic lift valves
- reduces the wear on parts undergoing friction
-rattling is a thing of the past!

For your bio-ethanol-powered vehicle, Mecacyl:
-, facilitates cold start-ups by reducing wear, thus protecting and prolonging the life of your mechanics,
-, prevents or reduces scraping and other noises (noises from hydraulic valve tappets, for example), for silent and comfortable driving,
-, limits increases in temperature, thus limiting oil consumption,
-, enables better efficiency, thus enabling the generation of increased torque, power and acceleration,
-, enables reduced consumption with the same performance, thus saving fuel
-, and enables cleaner combustion with reduced consumption
thus facilitating the transition to anti-pollution checks.
And specifically for ethanol,
-, limits the consequences of the dilution of the alcohols in the oil
thus protecting your mechanics.

Packaging: 100 ml

Start Pilot 300 ml engine starter is suitable for both petrol and Dieselengines and ensures you start instantly in all weathers. Just spraying fora second into the air filter inlet is sufficient.
This engine starter is suitable for both small 2-stroke and 4-stroke engines and is recommended for lawn mowers and boat engines.
Start Pilot lubricates the top ofthe cylinders from the first engine strokes, therefore limiting its wear. This productalso prevents sudden explosions during starting.

Enginestart comes inthe form of an aerosol and has a valve enabling it to be used in all positions.

BARDHAL Pre-Exchange Cleaner 300ml is a treatment specially developed to dissolve sludge and keep particles in suspension in used oil, leaving the inside of your engine clean before refilling with new oil.
It is compatible with all 4-stroke petrol (including hybrid, turbocharged...), diesel (DCI, CDTI, HDI, TDI, TDCI...) and LPG engines, and with all types of oil. It is also safe for catalytic converters and FAP particulate filters.

Advantages :
- dissolves, loosens and suspends all types of deposits.
- cleans the entire engine lubrication circuit.
- prevents premature engine wear.

Dosage : 1 bottle of 300ml effectively treats 6 liters of oil volume (maximum 10% of crankcase capacity).

Directions for use :
- pour the contents of the bottle into the used oil, while the engine is warm, before draining.
- Run the engine at idle or in normal operation for 15 minutes.
- drain immediately while oil is still hot.
- replace oil filter.
- fill the crankcase with new oil.

Please observe all safety precautions.

BARDHAL LXR PLASMA Oil booster additive for latest-generation diesel (Euro 5b), gasoline and hybrid vehicles, provides protection, lubrication and durability performance that surpasses conventional petroleum-based performance additives.
This genuine technological innovation in formulation is compatible with all types of oil. It is particularly suitable for 0W, 5W and 10W fluid oils.
BARDAHL uses the exceptional power of plasma induction to reinforceplant ester molecules by cross-linking. The electric charges of the ionized gas (plasma) enable the plant esters to bind together, forming small electro-magnetic molecular springs that adhere strongly to metal surfaces. This creates an ultra-lubricating protective film between moving mechanical parts.

Advantages :
- 100% Biotech.
- Anti-wear and anti-friction.
- Reduces engine operating temperature.
- Reduces fuel consumption and CO2 emissions.
- Enhances viscosity index and improves oil stability at very low and very high temperatures, even in extreme racing conditions.
- High resistance to corrosion.
- Extreme pressure (EP) properties.
- Extends the life of mechanical parts.

Dosage: 1 bottle of 400ml treats up to 8 liters of oil volume.

Directions for use:
- With the engine warm, add the bottle to the oil sump through the filler hole, after replacing the oil filter and topping up with new oil (deduct 400ml from the volume of oil put back into the sump, so as not to exceed the quantity recommended by the manufacturer).
- The product must be used within 24 months. It must be stored in its original
protected from light, humidity and excessive temperatures.

Please observe all safety precautions.

BARDAHL 5 in 1 Engine Cleaner for petrol engines - 500ml
BARDAHL' s 5-in-1 Engine Cleaner is quick and easy to use, providing ultra-complete engine cleaning without disassembly of the most sensitive parts. Its formula of highly concentrated, multi-functional additives makes it possible to reach all the areas to be cleaned through the fuel circuit, in just one tank of petrol:- Turbo- EGR valve- Injectors- Valves- Catalytic converter- Particulate filter
The benefits of BARDAHL 5-in-1 gasoline engine cleaner:Cleans turbo, EGR valve, particulate filter, exhaust valves and catalytic converter without disassembly.Cleans and protects the injection system, and restores injector flow.Improves pollutant emission levelsPrevents over-consumption of fuel and loss of powerCompatible with all hybrid vehicles
Instructions for use:Wait until the reserve light is on.Pour the bottle into the tank using the integrated fuel extender.Add 35 liters of fuel to your tank.Once your engine is warm, run at a constant speed of between 2500 and 3000 rpm for 20 minutes, then drive normally. This action can be repeated several times until you run out of treated fuel.Refuel as normal.

BARDAHL Belt Adhesive Spray(250ml) is the solution for eliminating belt noise.
In addition to reducing belt slippage, it will protect the rubber and prevent it from aging.

ADVANTAGES:
- Restores mechanical power to belt-driven components
- Eliminates slipping noises (whistling, squeaking)
- Long-lasting action
- Extends service life and protects against premature wear

USE ADVICE :
- Before use, make sure belts are correctly tensioned according to your manufacturer's recommendations.

Please observe all safety precautions.

Please note: aerosols cannot be shipped by air (DOM TOM).

MOTUL Engine flush in 300ml format is a pre-drain engine cleaner for use in all types of petrol, diesel or LPG engines, naturally-aspirated or turbocharged, with or without catalytic converter. It is compatible with all mineral and synthetic oils.
This high-performance product, the result of MOTUL know-how, effectively cleans deposits and fouling that appear in the engine as the oil wears down over time. The detached micro-particles are then discharged into the used engine oil during the oil change. Another advantage: it ensures a high level of lubrication during the cleaning process to protect and preserve your engine's mechanical components .

WARNING: Not suitable for cleaning manual and automatic gearboxes. In the case of a very dirty engine, do not increase the dosage but make 2 successive treatments!

Advantages :
- Reduces wear.
- Reduces oil and fuel consumption.
- Increases compression equally across all cylinders.
- Reduces exhaust pollutant emissions.
- Removes deposits, varnish and other combustion residues from high-risk areas such as hydraulic tappets, piston grooves and rings.
- Prevents pollution of new oil after filling (longer service life and conservation of oil qualities).
- Extends the life of catalytic aftertreatment systems.

MECACYL 300ml pre-drain cleaner is a top-of-the-range preventive and curative treatment developed to eliminate contaminants present in the oil circuit of all types of gasoline or diesel engines, modern or old, with or without turbo, before draining .
Miscible in all types of oils, including synthetic ones, it neutralizes soot and combustion residues in order to avoid any contamination of the new oil which will retain its qualities for longer. In addition, its properties limit engine wear and protect against corrosion.

Advantages :
- Dissolves and disperses sludge, varnish "sludges" and deposits.
- Cleans pumps, strainers, segments, crankshaft bearings, hydraulic tappets...
- Eliminates any contamination of the new oil which will retain its qualities longer.
- Facilitates the installation of MECACYL CR, CR-P or CR-Bio Ethan.

Dosage: 1 bottle of 300ml effectively treats 3.5 liters to 6 liters of oil volume.

Usage tips :
- Before draining, pour the contents of the bottle into the used oil via the crankcase filler opening, with the engine at its operating temperature.
- Run the engine at idle for 15 minutes without accelerating.
- Drain immediately while the oil is still hot.
- It is essential to change the oil filter.
- Fill the crankcase with new oil.

Please respect the precautions for use.

CAM SHIELD additive with ZDDP
This Zinc ZDDP-based CAM-SHIELD additive is designed to improve the longevity of all engine internal mechanics, camshafts and lifters.
A 1.89L canister treats up to 240 liters of oil for road use and 120 liters for racing use.
Easy to use, with built-in dispenserParticularly suitable for pre-1980 vehicles with no engine oil suitable for older mechanics
Follow dosage instructions for optimum resultsObserve safety precautions