rack

This KERSCHER steering rack for VW Beetles up to 07/1965 is German quality.
This kit allows the installation of a rack-and-pinion steering system on VW Beetles and Buggies with front axle pivots.Although it mounts on the steering box mountings, it requires precise mechanical and welding skills, mainly at the steering column.This rack comes with the spacers and gaskets needed to slightly remount the tank on older models.
Compatible models:- VW Beetle sedan and convertible 1200, 1300, 1500 with pivoting front axle up to 07/1965Chassis: ->No. 116 000 000- VW Karmann-Ghia type 14 All models with pivoting front axle up to 07/1965Chassis: ->N° 146 000 000

Universal joint connecting the unit and steering column.
An essential safety component, we have chosen this
superior quality manufactured part which is equivalent to the original.

For Beetle 1302 & 1303, 08/1970 ->07/1974
- 1302 chassis no. 111 2000 001 ->112 3200 000.
- 1303 chassis no. 133 2000 001 ->134 2999 999.
Versions with steering unit.

Sold individually

Steering rack bellows.
2 required, sold per unit.

For:
- VW Transporter T4, Multivan, 09/1990 ->04/1997
up to chassis No. ->70-V-150 000.
- Syncro version (4 x 4), 11/1992 ->05/1996
up to chassis No. ->70-T-300 000.

Steeringrack silentbloc.
Inner diameter: 10 mm
4 required, sold per unit.

For VW Transporter T4, Multivan, 08/1992 ->06/2003
since chassis no. 70-P-004 343->

This steering rod end spring for DYANEs and Acadianes is true to the original.

It keeps the steering rod end seats under pressure.
Can also be used in the rack to keep the pushrods under pressure.

This rack wear ring for 2CV Vans - 34mm

is made of steel, and is for repairing the rack ring located between the two ball joints. Slightly thicker than the original ring, it compensates wear to the rack to reduce steering give/play.

This complete rack for 2cv Fourgonnette (07/1975-07/1990) - 8 teeth is a quality remanufacture.

This assembled 8-tooth rack for 2CV Fourgonnette is complete. It allows easy replacement of the rack for 2CV and derivatives produced after July 1975 with 1/17 gear ratio.

It includes guide, 32-tooth rack, ball joints, cups, springs and new, assembled riveted ring.

Compatible models:

- 2CV AZU 250 type AZU-B/AK-AP: 07/1975 to 03/1978
- 2CV AKS type AK-AK: 07/1975 to 03/1978

This steering silentblock for AMI 6 and AMI 8 cars is faithful to the original.

This steering damper is compatible with all models after 1964. Made of rubber, it replaces the springs supporting the steering guidance dies and considerably reduces noise and vibration in the steering.

Steering rack without exchange (no deposit or return of old rack)

For Golf 1 saloon, cabriolet and Caddy ->93 except automatic,
from chassis 178 3058 450->

For Scirocco from chassis 538 2009 474-> except automatic

For left-hand drive vehicles only

This steering ring rivet for DYANEs and Acadianes is specific to rack wear rings.

It is compatible with all models of Dyanes and Acadianes.

CEVAM steering rack for Peugeot 205
This steering rack for Peugeot 205 is suitable for versions with left-hand steering, replacing an original TRW steering rack without power steering and cogged version.
Original quality part
For Peugeot 205 :- 1.0 GL, GE, XL, XE, Junior 954cm3 45hp (XV8) from 02/1983 to 07/1987- 1.1 GL, GR, XL, XR 1124cm3 50hp (XW7) from 02/1983 to 07/1987- 1.4 GR, SR, XR 1360cm3 60hp (XY7) from 02/1983 to 07/1987- 1.4 GT, XT, XS 1360cm3 80hp (XY8) from 02/1983 to 07/1987- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998- 1.8 Turbo 16 1775cm3 200hp (XU8T) from 03/1984 to 12/1987- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Peugeot 205 Cabriolet : - 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 CJ Catalysée 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 CT 1360cm3 80hp (XY8) from 07/1986 to 07/1987- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1990- 1.9 CTI 1905cm3 130hp (XU9JA) from 08/1990 to 07/1991- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

This steering rod end spring for Meharis is true to the original.

It keeps the steering rod end seats under pressure.
Can also be used in the rack to keep the pushrods under pressure.

This steering ring rivet for 2cvs is specific to rack wear rings.

It is compatible with all models of 2cv cars and derivatives.

Suitable for:
- Golf 2
- Corrado

Black DANSK protective plate attached to the chassis after the fuel tank, protecting the rack and the auxiliary support connecting the 2 front wishbones from splashes. Suitable for Porsche 911 and 912:
-> Porsche 912:- 912 1.6 from 1966 to 1969
-> Porsche 911:- 911 2.0 from 1965 to 1967- 911 2.0 T / L / E / S from 1967 to 1969 - short and long chassis- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973 with 62-liter fuel tank- 911 2.7 Carrera RS from 1973- 911 2.7 from 1974 to 1977-> For 911 2.7 with auxiliary support / aluminum crossmember- 911 2.7 S from 1974 to 1977-> For 911 2.7 S with auxiliary support/aluminum crossmember- 911 Carrera 2.7 from 1974 to 1976-> For 911 Carrera 2.7 with auxiliary support/aluminium crossmember

Protective gaiter for steering rack.
2 tightening clamps required.

For Beetle 1303 Hatchback& Cabriolet, 08/1974 ->01/1980
from chassis no. 135 2000 001->

This moving rack cover slide for 2cvs is a quality reproduction.

Made of bichromate steel, this rack slide guides the steering heads.
It is compatible with all 2cv models and derivatives.

Steering rack protection bellows high quality for VW Transporter T25 / T3 from 05/1979 to 07/1992
All models including Syncro version (4x4).

This complete rack for Mehari (05/1977-07/1987) - 8 teeth is a quality remanufacture.

This assembled rack for 8-tooth Mehari is complete. It allows easy replacement of the rack for Meharis produced after May 1977 with 1/17 gear ratio.

It includes the guide, 32-tooth rack, ball joints, cups, springs and new, assembled riveted ring.

Compatible models:

- Mehari series1 type AY-CA: 05/1977 to 09/1977
- Méhari série2 type AY-CA: 09/1977 to 07/1987
- Mehari Azur type AY-CA: 07/1985 to 07/1987
- Mehari 4X4 type AY-CE: 06/1979 to 06/1983