Jacks

Original, black

Reinforced tailgate jack with bicycle rack accessories for VW Transporter T25 / T3 from 05/1979 to 07/1992Makes it easier to lift a loaded tailgate.Length: 520 mmPressure: 800 Nm
Need 2 per vehicle, sold individually.

Lid hood strut for Porsche 986 Boxster :

- 986 2.5 Boxster - 204 hp from 1997 to 1999
- 986 2.7 Boxster - 220 hp from 2000 to 2002
- 986 2.7 Boxster - 228 hp from 2003 to 2004
- 986 3.2 Boxster S - 252 hp from 2000 to 2002
- 986 3.2 Boxster S - 260 hp from 2003 to 2004

Length : 225 mm

Quantity per car : 2

Sold individually

Gas pressure spring of the front hood for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005

Not suitable for Porsche 996 GT3 RS

Quantity required per car : 2

Length : 225 mm

To replace the original

Hood lift support
replacing the original

Vérin de capot avant sélection MECATECHNIC pour BMW série 3 E36 Coupé et Cabriolet :

Coupé :
- 316i 4cyl 102cv du 03/1993 au 03/1999 (code moteur M43B16)
- 318is 4cyl 140cv du 02/1991 au 02/1996 (code moteur M42B18)
- 318is 4cyl 1.9L 140cv du 02/1995 au 05/1999 (code moteur M44B19)
- 320i 150cv du 02/1991 au 08/1992 (code moteur M50B20)
- 320i 150cv du 09/1992 au 07/1995 (code moteur M50B20TU)
- 320i 150cv du 01/1994 au 11/1998 (code moteur M52B20)
- 323i 2.5L 170cv du 07/1994 au 04/1999 (code moteur M52B25)
- 325i 192cv du 10/1990 au 08/1992 (code moteur M50B25)
- 325i 192cv du 09/1992 au 07/1995 (code moteur M50B25TU)
- 328i 193cv du 07/1994 au 04/1999 (code moteur M52B28)
- M3 3.0L 6cyl 286cv du 03/1992 au 08/1995 (code moteur S50B30)
- M3 3.0L GT 6cyl 295cv du 11/1994 au 06/1995 (code moteur S50B30)
- M3 3.2L 6cyl 321cv du 09/1995 au 12/1998 (code moteur S50B32) 

Cabriolet :
- 318i 4cyl 116cv du 11/1993 au 09/1999 (code moteur M43B18)   
- 320i 150cv du 11/1992 au 04/1995 (code moteur M50B20TU)
- 320i 150cv du 05/1994 au 10/1999 (code moteur M52B20)
- 323i 2.5L 170cv du 03/1995 au 09/1999 (code moteur M52B25)   
- 325i 192cv du 08/1992 au 07/1995 (code moteur M50B25TU)
- 328i 193cv du 07/1994 au 09/1999 (code moteur M52B28)   
- M3 3.0L 6cyl 286cv du 11/1993 au 12/1995 (code moteur S50B30)
- M3 3.2L 6cyl 321cv du 02/1996 au 08/1999 (code moteur S50B32)

ATTENTION : Ne convient pas pour Berline, Touring et Compact !

Caractéristiques techniques :
- Longueur : 411 mm (+/- 5 mm)
- Diamètre de la tige : 6 mm
- Diamètre du corps de vérin : 15 mm
- Force d'éjection : 280 N

Quantité nécessaire par véhicule : 2

Ce produit est vendu à l'unité.

Original tailgate cylinder without accessories for VW Transporter T25 / T3 from 05/1979 to 07/1992.Length : 520 mmPressure : 610 NmNeed 2 per vehicle, sold individually.

Front hood strut for Porsche 912, 911 and 930 :

-> Porsche 912 :
- 912 E 2.0 from 1976

-> Porsche 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

2 struts are required for the vehicle.

Sold individually

Engine hood cylinder for:
- 924 2.0 to 2.5 from 06/1980 to 07/1988
- 944 2.5 to 3.0 from 06/1981 to 07/1991

Hood jack for Porsche 964 from 1989 to 1994 :
- 964 3.6 - 250hp (M64.01/02) Carrera 2 from 1990 to 1994- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1994- 964 3.6 - 260hp (M64.03) Carrera RS from 1992- 964 3.6 - 250hp (M64.03) Carrera RS America from 1992- 964 3.3 - 320hp (M30.69) Turbo from 1991 to 1992- 965 3.6 - 360hp (M64.50) Turbo from 1993 to 1994
2 cylinders are required for the vehicle.
Sold individually
Length: 255 mm
Suitable for right and left sides.

Hood jack for Porsche 911 type F from 1965 to 1973 :
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
2 cylinders are required for the vehicle.
Sold individually
Length: 255 mm
Suitable for right and left sides.

Engine hood jack for Porsche 993 from 1994 to 1998 :
- 993 3.6 - 272hp Carrera from 1994 to 1995- 993 3.6 - 272hp Carrera 4 from 1995- 993 3.6 - 285hp Carrera from 1996 to 1998- 993 3.6 - 285hp Carrera S from 1997 to 1998- 993 3.6 - 285hp Carrera 4 from 1996 to 1997- 993 3.6 - 285hp Carrera 4S from 1996 to 1998- 993 3.8 - 300hp Carrera RS from 1995 to 1996- 993 3.6 - 408hp Turbo from 1995 to 1998- 993 3.6 - 450hp Turbo S from 1997 to 1998- 993 3.6 - 430hp GT2 from 1996 to 1998
2 cylinders are required for the vehicle.
Sold individually
Length: 255 mm
Suitable for right and left sides.

Hood jack for Porsche 911 type G from 1974 to 1989 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
2 cylinders are required for the vehicle.
Sold individually
Length: 255 mm
Suitable for right and left sides.

Boot damper jack
to replace the original.

For VW Golf 3 saloon
1992 ->1998

Bonnet damper fastener for Porsche :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1977
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

-> Porsche 964 :
- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp of 1992
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

-> Porsche 993 :
- 993 3.6 - 272 hp Carrera and Carrera 4 from 1994 to 1995
- 993 3.6 - 285 hp Carrera and Carrera 4 from 1996 to 1998
-Clip d'axe de vérin de capot pour Porsche 911, 912, 964 et 993

Right gas pressure spring of the rear hood for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Not suitable for Porsche 996 Carrera 4S

Quantity required per car : 1

Length : 315 mm

Retainer jack for the window or the fibre-opening boot on the rear cell of Volkswagen Golf 1 Caddy

2 required
Sold individually

For Saloon and Estate:
up to chassis ->1J-1-560 000

Original quality

Piston stroke: 205mm
Length: 500 mm
Pressure: 500 N

OE Reference:
3B9 827 550
1J6827550

Vérin de malle arrière STABILUS pour BMW série 3 E36 Berline et Coupé du 11/1989 au 05/1999 :

- Tous modèles

ATTENTION : Ne convient pas pour Compact !

Quantité nécessaire par véhicule : 2

Qualité origine

Ce produit est vendu à l'unité.

Référence OE : 51248254281