Hood

Rubber hood clips from EMPI for a racing look, or for real utility if you've got a powerful vehicle or a fiberglass hood.

30 x 22/12 mm adjustable rubber stop

EMPI hood clips for a racing look, or for real utility if you have a powerful vehicle or a fiberglass hood.

New engine bonnet made of metal plate.
Excellient, superior quality reproduction part, protected by a weldable anti-rust primer that can be painted after light low-level sanding.

For VW Kombi Bay Window T2a
Years: 08/1967 -> 07/1971
From chassis no. 218 000 001 ->211 2300 000

Countersunk M8 x 15 milled head screw for fitting engine compartment hinges. VW original quality.

For VW Kübelwagen type 181
Years: 08/1969 ->12/1979

For Golf 1 Saloon, Jetta, Caddy and Cabriolet

Suitable for:
- Golf 1 Caddy from chassis 14-E-000 001->
- Golf 1 cabriolet from 1984->
- Golf 2

Fixing clip to the hood support bar

To Golf 1 Berline & Cabriolet 08/1980 ->07/1993
Caddy, Jetta 1, Scirocco
Polo 2 & 3, 10/1981 ->07/1994

Fastening clip for front engine bonnet stay rod.

For VW :
- Transporter T5, types 7H/7J
From 04/2003->

Suitablefor:
- Golf 2 and Jetta 2
- New Beetle (type 1C, 9C) up to chassis ->1C-W-099000 and ->9C-W-099000
-Passat 1 (type 32, 33) until ->07/77
- Passat 2 (type 32B)
- Passat3 (type 312, 315, 3A2, 3A5)
- Polo type 86
- Polo Classic 6V2
- Audi80 (type 81, 89, 8A)
- Audi 100 (type 43)

Fastening clip for front engine bonnet stay rod.

For VW :
- Transporter T4, types 70/7D
All models, 09/1990 ->06/2003.

This rubber front bumper stop under the bonnet for 2cv vans avoids any knocks between the engine lid and the front bumper.

It is also used as a chock for the front wings on the 2cvs before 1972.

This rubber front bumper stop under the bonnet for 2cv avoids any knocks between the engine lid and the front bumper.

It is also used as a chock for the front wings on the 2cvs before 1972.

This rubber front bumper stop under the bonnet for 2cvs before 1970 avoids any knocks between the bonnet and the front bumper.

It is also used as a chock for the front wings on the 2cvs before 1972.

This rubber side stop for 2cvs from 1963 onwards prevent wings and bonnets from colliding.

This rubber side stop for 2cvs prevent wings and bonnets from colliding.

This rubber side stop for 2cv vans prevent wings and bonnets from colliding.

Clip of fixation of front trunk emblem flat design diameter 82mm for BMW.

Quantity needed per vehicle: 2

This staple sleeve is used to fix the original logo BMW on the front hood.

INFORMATION: Also suitable for attaching rear trunk emblem flat design diameter 82mm on Z4 E85 Roadster.

This product is sold individually.

High-quality remanufactured front hood for BMW 02 series E10 Sedan, Touring, Cabriolet and Cabriolet Baur Targa phase 1 and phase 2 from 03/1966 to 12/1975:

- All models from 1600-2 to 2002Turbo

ATTENTION: Not suitable for 1502 produced from 11/1974 to 07/1977!

Emblem, hinges and chrome mouldings not included.

INFORMATION: It is drilled around the perimeter to accept the aluminum trim strips (chrome moldings).

The front hood is delivered bare with black storage paint. Before final painting of this part, it is essential to treat and prepare it to prevent corrosion from reappearing.

Treat your E10 to a high-quality body part!

This metal front body panel is called "adaptable" because it doesn't come from the manufacturer.

Due to its size, fragility and composition, this product cannot be delivered to your home or to a relay point. However, it is still possible to collect it directly from the store or to send it to us by courier.

Locking clip for rear engine hood opening and closing linkage for VW Combi Bay Window from 08/1967 to 07/1973.