Engine compartment

Seal trim sheet metal guide for welding to bodywork. U-shaped metallic profile.
Length: 940mm
Total thickness: 6mm
Total width: 19mm
10mm hollow in the middle for insertion

This very thin plastic cover protects the vents and the fan located under the windscreen frame of the Golf 1.
For Saloon, Convertible, Caddy all models.
Version with window (without transparent plastic) to enable serial number inspection.

Superior quality equivalent to the original

These plates are essential for proper engine cooling.
Need 2 plates per motor, sold individually.
For 10mm studs

For Beetle

These plates are essential for proper engine cooling for VOLKSWAGEN Combi Split Brazil (1957-1975)
Need 2 plates per motor, sold individually.
For 10mm studs

This left-hand cooling plate for Volkswagen Beetle (08/1972-07/1980) type 1 double heater engine is true to original.

It is compatible with all Beetle models, sedans or convertibles, with 1300 and 1600 cc engines with double pre-heating from August 1972 to July 1980.

These plates are essential for proper engine cooling.Need 2 plates per motor,Sold individually.
For VW Beetle & Combi with 1200 engine

Panel between the wing inner panel and the engine cooling panels.
Right-hand side

For Beetle all versions, 08/1967 ->07/1974
Chassis no. 118 000 001 ->114 2999 000.

Chrome without heating hole

Chrome-plated jacket tube protection for VW Type 1 engines.Sold in pairs for both sides of the engine.

DANSK engine compartment rear heat shield for Porsche 356 B and C from 1960 to 1965 :

- 356 B from 1960 to 1963
- 356 C from 1964 to 1965

DANSK lower left engine cover for Porsche 911 type F and G from 1969 to 1977 :

- Porsche 911 type F :

- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 3.0 from 1976 to 1977

Chromed rear air deflector kit with gaskets for VW Combi Bay Window from 08/1967 to 07/1979 for Type 1 dual intake engines:- AB / AR / AD / AS.

DANSK engine air duct cover for Porsche 911 type F and G from 1965 to 1989:

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1989

Set of 3 left and right chromed plates located under the outer tubes on Type 1 engines: 1300, 1500, 1600.
For VW Beetle, Karmann-Ghia & Combi
Does not fit 1200cc.

Original type black crescent-shaped metal sheet:
-> 2 holes for heating
-> 0 holes for the heaters

For Beetle & Combi with Type 1 engine.

DANSK lower left engine cover for Porsche 911 type F and G from 1972 to 1976 :

- Porsche 911 type F :

- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 Carrera 2.7 from 1974 to 1976

Hot air duct guide plate on left heater box type 4 engine for VW :- Combi T2 Bay Window from 08/1971 to 07/1979- Transporter T25 / T3 from 05/1979 to 12/1982Type 4 engines: 1700, 1800, 2000cc
Origin VW Classic Parts

Lateral triangularengine compartment plate, for between the interior wing cheek and the cooling plates.
Left-sided. Superior quality equivalent to the original, producedby Auto Craft.

For VW Beetle Saloon & Cabriolet
Years:1948 ->07/1960
Chassis: up to no.->3 192 506.

Bottom left engine cover for:
- 964

Original PORSCHE part.