Beam

Heated rearscreen electrical kit consisting of :
- Wiring
- Fuse holder
- Relay
- Switch

Replaces the old original system or enables a heated rear screen to be installed as an option. Universal, supplied without instructions

USA original sheathed electrical circuit wiring, supplied with connectors, grommets and English instructions with diagrams.
For VW Beetle Sedan and Convertible with dynamo in 10-slot fuse box from 08/1969 to 07/1971 from N° 110 2000 001 to N° 111 3200 000.

USA original sheathed electrical circuit wiring, delivered with connectors, cable grommets and instructions in English with diagrams.

For VW Beetle Saloon & Cabriolet
Years: 08/1967 ->07/1969
Chassis: 118 000 001 ->119 1200 000.

USA original sheathed electrical circuit wiring, supplied with connectors, grommets and English instructions with diagrams.
For VW Beetle Sedan and Convertible 1302 from 08/1970 to 07/1971.

USA originalsheathed electrical circuit wiring, supplied with connectors, cable glands and English instructions with diagrams.
For VW Beetle Sedan and Convertible from 08/1971 to 07/1973 except 1302 and 1303.

Sheathed main circuit wiring supplied with connectors, cable glands and English instructions with diagrams for VW Combi Bay Window from 08/1971 to 07/1979 from chassis No. 212 2000 001 to No. 219 2153 964.

USA original typesheathed electrical circuit wiring, supplied with connectors, grommets and English instructions with diagrams.
For VW Cox Sedan from 08/1961 to 07/1964 and chassis N° 4 010 995 to N° 6 502 399.

Simplified universal electrical circuit. Sheathed wiring harness supplied without fuse box or wiring for vehicle front lighting. Ideal for Buggy or Kit-car.

3-pole plug with wiring for:
- 911 from 1965 to 1989
- 964 from 1989 to 1994

This beam clamp for 2cv vans - 62mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

This beam clamp for 2cvs before 1970 - 62mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

SASIC ignition wire set for Peugeot 205 at TU engine.

Original equipment quality part.

Ignition coil cable length: 320mm
Spark plug cable length: 490 - 590 - 640 - 740 mm

Assignments:
- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992
- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995
- 1.3 Rallye 1294cm3 103hp (TU24) from 08/1987 to 07/1992
- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988
- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990
- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992

Cabriolet :
- 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992
- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988
- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990

Circuit électrique complet universel (non gainé).
Câblage livré avec boîte à fusibles.
Idéal pour Buggy ou Kit-car.

This cluster clamp for 2cv cars and derivatives - 46mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

Interior lighting harness for Porsche 911 type F, G and 912 from 1969 to 1984:
- Porsche 911 type F :
- 911 2.0 T / E / S from 1969 Coupé only- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- Porsche 911 type G :
- 911 2.7 from 1974 to 1977 Targa only- 911 S 2.7 from 1974 to 1977 Targa only- 911 Carrera 2.7 from 1974 to 1976 Targa only- 911 Carrera 3.0 from 1976 to 1977 only in Targa- 911 SC 3.0 from 1978 to 1983 only as Coupé- 911 Carrera 3.2 from 1984 Coupé only
- Porsche 912 :
- 912 1.6 from 1969 Coupé only

This beam clamp for DYANE and Acadiane - 46mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

Cable harness for pump injector engines.
With time and vibration, connectors become slack and cause engine problems,

For VW Touran (1T1) and (1T2) :
- 2.0 TDi 170hp (BMN)

This beam clamp for AMI 6 and AMI 8 - 46mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

This cluster clamp for 2cv cars and derivatives - 62mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.