Mount kit

Facilitates installation of large-diameter exhausts, and access to the intake pipes of dual carburetors. Prevents manifold loosening. Can be tightened with a ratchet fitted
(not supplied).

Suitable for all engine types with 8 mm studs.

Nuts (or locknuts) : M8
Reduced outside diameter : 12 mm
Thread length: 10 mm

Rear muffler mounting kit for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005

- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Required quantity per car : 1

Inner diameter 72 mm
To manifolds with round flanges:
- Golf 1 Cabriolet & Caddy 84 ->93
- Golf 2 84 ->92

This rear exhaust mounting kit contains all the clamps, straps and brackets needed to fit your Citroën DS.
This mounting kit is compatible with all DS models.

Exhaust mounting kit for Bmw 7 Series:

- Compatible with Bmw 7 Series E38 740D from 05/1999 to 11/2001 engine code M67 Bi-Turbo 245hp.

The exhaust assembly kit for 2cv and derivatives is suitable for all 2cv models and derivatives with 435cc or 602cc engines.

This complete kit contains all the elements required to install a complete exhaust system.
It consists of the following parts:
- the 2x 47mm clamps - Heating boxes > Horned beast.
- the 49mm clamp - Horned beast > gooseneck.
- the 2x 36mm clamp - gooseneck > cigar > exhaust.
- the 2 feet and the 2 rubber rings for mounting the cigar.
- the 2 rubber feet, long and short, the supports and the clamps for mounting the exhaust.
- the screws and bolts.

Heating box mounting kit (or heat exchanger) for Porsche 911 from 1965 to 1974 :

- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1974
- 911 2.7 S from 1974
- 911 Carrera 2.7 from 1974

The kit contains :
- 1 gasket heat exchanger / silencer
- 3 gaskets exchanger / cylinder
- 2 screws + nuts M10 exchanger / silencer
- 3 nuts BTR M8 (for right exchanger)
- 3 hexagon nuts M8 (for left exchanger)
- 1 hexagon nut + washer M6 (gearbox heat exchanger fixing)

Suitable for 1 heating box
Quantity required per vehicle : 2

The exhaust mounting kit for DYANE and Acadiane is suitable for all DYANE and Acadiane with 435cc or 602cc engines.

This complete kit contains all the elements required to install a complete exhaust system.
It consists of the following parts:
- the 2x 47mm clamps - Heating boxes > Horned beast.
- the 49mm clamp - Horned beast > gooseneck.
- the 2x 36mm clamp - gooseneck > cigar > exhaust.
- the 2 feet and the 2 rubber rings for mounting the cigar.
- the 2 rubber feet, long and short, the supports and the clamps for mounting the exhaust.
- the screws and bolts.

The exhaust assembly kit for Mehari is suitable for all Mehari models with 435cc or 602cc engines.

This complete kit contains all the elements required to install a complete exhaust system.
It consists of the following parts:
- the 2x 47mm clamps - Heating boxes > Horned beast.
- the 49mm clamp - Horned beast > gooseneck.
- the 2x 36mm clamp - gooseneck > cigar > exhaust.
- the 2 feet and the 2 rubber rings for mounting the cigar.
- the 2 rubber feet, long and short, the supports and the clamps for mounting the exhaust.
- the screws and bolts.

This exhaust mounting kit for AMI 6 and AMI 8 cars is suitable for all AMI 6 and AMI 8 cars with M4 and M28 engines.

This complete kit contains all the elements you need to install a complete exhaust system.
It consists of the following parts:
- the 2 x 47mm clamps - Heat exchangers > front exhaust silencer (horned).
- the 49mm clamp -Front exhaust silencer (horned) > intermediate exhaust pipe (gooseneck).
- the 2 x 36mm clamps - Intermediate exhaust pipe (gooseneck) > centre exhaust silencer (torpedo) > exhaust pipe.
- the 2 tabs and the 2 rubber rings to secure the centre exhaust silencer (torpedo).
- the 2 long and short rubber tabs, the supports and the clamps to secure the exhaust pipe.
- the screws and bolts.

Silentbloc kit with silencer support for Bmw 7 Series:
- Compatible with all Bmw 7 Series E32 versions from 10/1985 to 04/1994 except model 750i v12 engine code m70.
Need 2 kits for 1 vehicle.
Sold individually.

Silentbloc kit with silencer support for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 03/1987 to 12/1996 with petrol engines only.
Need 2 kits for 1 vehicle.
Sold individually.

Silencer valve opening switches for:
- 996 3.4 to 3.6

Suitable for reference RS10563.

Exhaust valve connection kit for Porsche 911 type 997 (2005-2013)

The kit is suitable for fitting DANSK exhausts.

Exhaustmounting kit for Bmw 7 Series:
- Compatible only with Bmw 7 Series E38 type 728i M52tu

Exhaust mounting kit for Bmw 5 Series :
- Compatible only with Bmw 5 Series E28 525e 122hp engine code m20 from 09/1981 to 12/1987.

Exhaustmounting kit for Bmw z3:
- Compatible with Bmw z3 E36 version from 10/1995 to 01/2003 only with 4-cylinder petrol engine engine code M43.

Exhaust assembly kitfor Bmw z3 :
- Compatible with Bmw z3 E36 Coupé and Roadster versions from 06/2000 to 06/2003 only with 6-cylinder engine code M52tu and M54.

Exhaustmounting kit for Bmw 5 Series E39 :
- Compatible with Bmw 5 Series E39 528i from 09/1995 to 08/2000 engine code m52.

Exhaustmounting kit for Bmw 7 Series:
- Compatible only with Bmw 7 Series E38 type 728i engine code M52.