This TOOLATELIER tool is used to remove the 2 exhaust springs or flanges (one after the other) which secure the J-shaped manifold lower part to the cast-iron manifold.
For Golf 1: - 1.5 Diesel 50hp (CK) from 08/79 onwards -> 1.5 65hp (GH) from 08/79 onwards - 1.5 65hp (GH) from 08/80-> - 1.5 70hp (JB) from 08/80-> - 1.6 Diesel 54hp (CR, JK) from 08/80-> - 1.6Turbo Diesel 70hp (CY) from 08/80-> - 1.6 75hp (EW) from 08/80->
For Golf 1 Cabriolet Important: During assembly and disassembly, do not look for the breaking point of the flange and/or tool. Watch out for your fingers!
Make it easier to position the flange by applying pressure to the exhaust line.
These TOOLATELIER brand exhaust wideners are suitable for pipe diameters from 30 to 44 mm, 38 to 62 mm and 54 to 87 mm.
They enable an exhaust pipe to be widened in a parallel and uniform manner, so that it can be neatly connected to a pipe of the same diameter at the base.
Designed not only for widening, but also for repairing dents that may occur at fittings.
Suitable for exhaust pipe diameters : - 30 to 44 mm - 38 to 62 mm - 54 to 87 mm It is advisable to heat the exhaust pipe to prevent damage to the tool.
This chain pipe cutter is ideal for steel, copper, PVC, aluminium and stainless steel pipes with a maximum thickness of 2.5 mm and up to a diameter of about 85 mm.
You can adjust things during cutting by means of the lug screw.