Oil filter key

For motorhomes and caravans.
Hose for filling tanks, jerrycans, from a tap.
Length: 1 m.
Practical: flexible connector fits most faucets.

This filter bell or key is suitable for Volkswagen, Audi, BMW, Porsche and some Mercedes.

Size: 76 mm
Number of sides: 14
Height inside bell: 20 mm

Universal

Very useful for hard-to-remove filters.

- black finish caps
- three leg oil filter wrench Ø65mm at Ø120mm
- adaptor 3/8" x 1/2"
- end cap oil filter wrench in following sizes:
65mm x 14-pt - DAIHATSU, TOYOTA, NISSAN, FIAT
65 / 67mm x 14-pt - DAIHATSU, TOYOTA
66mm x 6-pt - FIAT Punto 1.2, RENAULT
68mm x 14-pt - MAZDA, FORD Escort , SUBARU
73mm x 14-pt - TOYOTA, LEXUS
74mm x 15-pt - AUDI, GM, ROVER, CHRYSLER.
74 / 76mm x 15-pt - FORD, OPEL, VW, AUDI, MERCEDES
75 / 77mm x 15-pt - VW, AUDI, FORD, ISUZU, MERCEDES, OPEL
76mm x 8-pt - FIAT Marea, LANCIA Delta
76mm x 12-pt - FIAT, RENAULT, MERCEDES
76mm x 14-pt - VW, MERCEDES, PORSCHE, BMW, AUDI, OPEL.
76mm x 30-pt - FORD, Motorcraft FL400A
78mm x 15-pt - NISSAN, FORD, TOYOTA.
80mm x 15-pt - NISSAN, HONDA, OPEL, MAZDA
80 / 82mm x 15-pt - SUBARU, TOYOTA, HONDA, MAZDA, NISSAN
86mm x 16-pt - VOLVO S40 / S60 / S70 /S80
86mmx 18-pt - VW, AUDI, RENAULT, PEUGEIOT, CITROEN
90mm x 15-pt - SUBARU, TOYOTA, HONDA, MAZDA, NISSAN
92mm x 10-pt - FIAT, LANCIA
93mm x 15-pt - MAZDA, VOLVO, MITSUBISHI, NISSAN, HONDA
93mm x 36-pt - FORD, Motorcraft FLINFLA 1B, FL3001, FL320
93mm x 45-pt - VW, AUDI
95mm x 15-pt - TOYOTA, ALFA, GM, FORD, CHRYSLER
96mm x 18-pt - VW, RENAULT
100mm x 15-pt - ISUZU, MITSUBISHI
106mm x 15-pt - FIAT Ducato 2.5D
108mm x 15-pt - Volvo Diesel C70 / S70 / N70 / 850 Tdi
108mm x 18-pt - RENAULT Espace / Laguna / Master / Safrane / Traffic 2.4+2.5+2.8D+Tdi

- To be used when a strap wrench cannot be used.
- 3/8"square drive

Very flat socket for better accessibility.
- Hex profile for damage-free removal of composite oil filter plugs.
- 3/8" drive.

- Very flat socketfor greater accessibility.
- 6-sided profile for removal without damaging composite oil filter plugs.
- 3/8" drive.

BGS oil filter key set :
Suitable for:
- Removal and installation of filters with sheet metal housing
Kit composition:
Wrench for 60 to 80 mm oil filterWrench for oil filter 60 to 80 mmWrench for 80-96 mm oil filterWrench for 80 to 96 mm oil filter

This 3 claw key is used to tighten and loosen oil filters from 63 mm to 101 mm.
Can be tightened using a key or 22 mm socket but also a 3/8" and 1/2" ratchet.

This set of flat cap sockets, 3/8" square drive are ideal for restricted spaces.

The 6 point profile can remove composite oil filter plugs without damaging them.

The sizes are 24 / 27 / 29 / 30 / 32 / 36 / 38 mm.

This TOOLATELIER set of 4 self-gripping wrenches for oil filters is suitable for a wide range of fleet vehicles.

It comprises 2 cloches, for tightening and loosening, for filters and cartridges with diameters from 60 to 80 mm, and 2 cloches, clockwise and anti-clockwise, for sizes 80 to 96 mm.

The wrench claws provide an excellent grip on the filter to prevent deformation.

They are 3/8" square.

Silver-colored wrenches => left-hand tightening
Black wrenches => right-hand tightening

- 17 mm 6-pt ring spanner with
14 mm internal hex. bit, slightly angled
- satin chrome finish

- for loosening of tight oil filters
- especially suitable for tight spaces
- steel strip is tensed by turning
the clamping screw at the end of the handle
- profiled steel strip prevents sliding over the filters

For tightening and loosening oil filters, PVC pipes, unscrewing stubborn lids...

Ergonomic, non-slip handle.

Size: 500 and 600 mm

Special design allows the oil filter to be removed and installed quickly and easily.
The steel jaws grips the filter without slipping.
Fits sizes 66 mm - 94 mm.
Can be used with all 3/8"D accessories.
Can be used with all 3/8"D accessories.
Reversible.

- range of jaw: 50 - 90 mm
- for cars and small utility vehicles
- avoids slipping when changing oil filters
- heavy duty construction with non-slip handles

A belt type oil filter wrench designed to remove filters without damage.
Adjustable from 65mm-105mm.
0.5mm thick.
Soft grip handle with twist adjuster.

Also fits Chevrolet, Citroën,Fiat, Peugeot, Saab and Suzuki
1/2"D x 115mm ID
Saves time
Prevents damage to the housing assembly
Prevents damage to the housing assembly
Essential service tool

Also fits Chevrolet, Citroën, Fiat,Peugeot, Saab and Suzuki
1/2"D x 115mm ID
Saves time
Prevents damage to the housing assembly
Prevents damage to the housing assembly
Essential service tool