Trunk Floorrear with the spare wheel housing for BMW 02 Series E10:
Berline: - 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116) - 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116) - 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116) - 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116) - 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18) - 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18) - 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18) - 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115) - 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05) - 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05) - 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05) - 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15) - 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05) - 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05) - 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15) - 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)
Cabriolet: - 1600-2 85hp from 01/1968 to 06/1971 (engine code M116) - 2002 100hp from 01/1971 to 06/1971 (engine code M05)
Cabriolet Baur Targa: - 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05) - 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)
The corrosion in the trunk floor of the E10, is unfortunately a "classic" of the model. This very high quality remanufacturing part will offer you the best solution to restore your 02'.
Complete lefthalf floor on driver's side for BMW 02 series E10 Sedan:
- All models 1502 to 2002Turbo from 03/1966 to 07/1977
ATTENTION: For the LHD left-hand drive version, the opening for the pedal box must be made (a marking is present on the part), the floor being full without a hole so that it can also be adapted to the RHD right-hand drive version!
Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Replacing them in their entirety will enable the body to be restored to its original dimensions.
This half-floor, comprising in 1 piece the front and rear sections (from the firewall to the rear seats), is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.
Give your E10 a high-quality body part!
This metal repair plate is called "adaptable" because it does not come from the manufacturer.
Complete passenger-side half floor for BMW 02 series E10 Sedan:
- All models 1502 to 2002Turbo from 03/1966 to 07/1977
ATTENTION: For the RHD right-hand drive version, the opening for the bottom bracket must be made, the floor being full without holes, so that it can also be adapted to the LHD left-hand drive version!
Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Replacing them in their entirety will enable the body to be restored to its original dimensions.
This half-floor, comprising in 1 piece the front and rear sections (from the firewall to the rear seats), is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.
Give your E10 a high-quality body part!
This metal repair plate is called "adaptable" because it does not come from the manufacturer.
Quarter floor right front passenger side length 67cm for BMW 02 series E10 Sedan:
- All models 1502 to 2002Turbo from 03/1966 to 07/1977
The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.
WARNING: For the right-hand drive (RHD) version, it does not include the raised part where the bottom bracket is fitted!
Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.
This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.
Give your E10 a high-quality body part!
This metal repair plate is called "adaptable" because it does not come from the manufacturer.
Rearquarter floor left driver side length 67cm for BMW 02 series E10 Sedan:
- All models 1502 to 2002Turbo from 03/1966 to 07/1977
The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.
Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.
This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.
Give your E10 a high-quality body part!
This metal repair plate is called "adaptable" because it does not come from the manufacturer.
Spare wheel bin in the bottom of trunk for BMW 02 Series E10:
Berline: - 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116) - 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116) - 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116) - 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116) - 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18) - 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18) - 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18) - 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115) - 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05) - 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05) - 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05) - 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15) - 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05) - 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05) - 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15) - 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)
Cabriolet: - 1600-2 85hp from 01/1968 to 06/1971 (engine code M116) - 2002 100hp from 01/1971 to 06/1971 (engine code M05)
Cabriolet Baur Targa: - 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05) - 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)
The spare wheel housing is accompanied by rampant corrosion on the 02'. Difficult to form without time and the right tools, thisnew body part is a so-called "adaptable" part of very high quality. It will save you a considerable amount of time, for a high level rendering in your restoration.
Quarter floor front left driver side length 67cm for BMW 02 series E10 Sedan:
- All models 1502 to 2002Turbo from 03/1966 to 07/1977
The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.
ATTENTION: For the left-hand drive (LHD) version, it does not include the raised part where the bottom bracket is fitted!
Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by quarter-flooring will enable targeted bodywork restoration while respecting the original dimensions.
This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.
Give your E10 a high-quality body part!
This metal repair plate is called "adaptable" because it does not come from the manufacturer.
Right rearquarter floor passenger side length 67cm for BMW 02 series E10 Sedan:
- All models 1502 to 2002Turbo from 03/1966 to 07/1977
The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.
Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.
This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.
Give your E10 a high-quality body part!
This metal repair plate is called "adaptable" because it does not come from the manufacturer.