Chassis & structure BMW E10

Top of the range refabrication front panel for BMW 02 Series E10 phase 1 from 03/1966 to 08/1973:

Sedan:
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1600ti 105cv phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120cv phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100cv phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130cv phase 1 from 04/1971 to 08/1973 (engine code M15)

Touring:
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1800 90hp phase 1 from 10/1971 to 08/1973 (engine code M10B18)
- 2000 100hp (M10) phase 1 from 04/1971 to 08/1973 (engine code M05)
- 2000A auto 100hp (M10) phase 1 from 05/1971 to 09/1972 (engine code M05)
- 2000tii 130cv (M10) phase 1 from 01/1971 to 08/1973 (engine code M15)

Convertible:
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Baur Targa convertible:
- 2002 100hp phase 1 from 06/1971 to 07/1973 (engine code M05)

Throughout its life, the front part of your BMW usually shows the presence of rust and various shocks. It cannot be dismantled, its replacement requires dismantling the old one and welding the new one, ensuring that everything is properly aligned.

The front facade is delivered bare in black storage paint. Before final painting, it is essential to treat and prepare it in order to prevent corrosion from reappearing.

Give a high quality body part to your E10!

Front end of high-end manufacture for BMW Series 02 E10 phase 2 from 09/1973 to 07/1977:

Berline:
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)

Touring :
- 1802 90hp phase 2 from 09/1973 to 04/1974 (engine code M10B18)
- 2002 100hp phase 2 from 09/1973 to 04/1974 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 04/1974 (engine code M15)

Baur Targa convertible:
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

Throughout its life, the front end of your BMW usually accuses the presence of rust and various shocks. It is not removable, its replacement requires unpointing the old one and welding the new one, making sure that everything is aligned properly.

The front front is delivered bare in black storage paint. Before final painting, it is essential to treat and prepare it with the aim of preventing corrosion from reappearing.

Give your E10 a high quality body part!"

This metal front body panel for BMW E10 is said to be "adaptable" because it is not from the manufacturer.

Right side skirt for all BMW E10

- 1502
- 1602
- 1802
- 2002
- 2002 Ti
- 2002 Tii
- 2002 Turbo

Quality sheet metal underbody.
Part said to be "adaptable" because it does not come from the manufacturer.

Thickness: 0.8 mm

Rocker panel left for all BMW E10

- 1502
- 1602
- 1802
- 2002
- 2002 Ti
- 2002 Tii
- 2002 Turbo

Quality sheet metal underbody.
Part said to be "adaptable" because it does not come from the manufacturer.

Thickness: 0.8 mm

Lower rear window frame for BMW 02 Series E10 Sedan phase 1 and phase 2 :

- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M118)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M118)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M118)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M116)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (M05 engine code)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (M05 engine code)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

This plate forms the junction between the rear window and the trunk. Corrosion settles very easily under the joint, making any repair complex due to its shape and location. Replacing it will ensure a quality restoration faithful to the original.

This body panel is delivered in stock black paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This quality part is called "adaptable" because it does not come from the manufacturer.

Complete passenger-side half floor for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

ATTENTION: For the RHD right-hand drive version, the opening for the bottom bracket must be made, the floor being full without holes, so that it can also be adapted to the LHD left-hand drive version!

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Replacing them in their entirety will enable the body to be restored to its original dimensions.

This half-floor, comprising in 1 piece the front and rear sections (from the firewall to the rear seats), is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

High-quality remanufactured rear panel with structure for trunk lock striker for BMW 02 Series E10 phase 1 European or USA version from 03/1966 to 08/1973:

Sedan :
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (M05 engine code)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)

Cabriolet :
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa :
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)

ATTENTION: For the European version, it will be necessary to drill holes for the emblem and license plate holder, which are not present on the panel, to ensure perfect adaptation of the rear panel to each existing E10 model!

Over the course of its life, the rear end of your BMW usually shows signs of rust and other damage.

The rear panel is delivered bare with black storage paint. Before final painting, it is essential to treat and prepare it to prevent corrosion from reappearing.

Treat your E10 to a high-quality body part!

This metal rear body panel for BMW E10 is "adaptable" because it does not come from the manufacturer.

Right exterior rocker panel passenger side metal without the rear quarter panel for BMW 02 Series E10

Berline:
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Touring:
- 1602 85hp phase 1 from 04/1971 to 09/1972 (engine code M116)
- 1800 90hp phase 1 from 09/1971 to 08/1973 (engine code M10B18)
- 2000 100hp phase 1 from 04/1971 to 08/1973 (engine code M05)
- 2000A auto 100hp phase 1 from 05/1971 to 09/1972 (engine code M05)
- 2000tii 130hp phase 1 from 01/1971 to 08/1973 (engine code M15)
- 1802 90hp phase 2 from 09/1973 to 04/1974 (engine code M10B18)
- 2002 100hp phase 2 from 09/1973 to 04/1974 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 04/1974 (engine code M15)

Cabriolet:
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa:
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

This sheet of repair forming the door sill is one of the parts that has a lot of corrosion on the E10. It is delivered bare in black storage paint. Before final painting, it is essential to treat and prepare it in order to prevent corrosion from reappearing.

Give your E10 a high quality body part!"

This body part is called "adaptable" because it is not from the manufacturer.

Right front engine lengthpassenger side flat version for BMW 02 Series E10 phase 1 from 03/1966 to 08/1973:

Berline:
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)

Touring:
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1800 90hp phase 1 from 10/1971 to 08/1973 (engine code M10B18)
- 2000 100hp (M10) phase 1 from 04/1971 to 08/1973 (engine code M05)
- 2000A auto 100hp (M10) phase 1 from 05/1971 to 09/1972 (engine code M05)
- 2000tii 130hp (M10) phase 1 from 01/1971 to 08/1973 (engine code M15)

Cabriolet:
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Baur Targa Convertible:
- 2002 100hp phase 1 from 06/1971 to 07/1973 (engine code M05)

Thisfront structure is one of the parts that has a lot of corrosion on the E10. It comes bare in black storage paint. Before the final painting, it is essential to treat and prepare it in order to prevent corrosion from reappearing.

High quality remanufactured part called "adaptable" because not coming from the manufacturer.

Right front engine lengthpassenger side version with flange for BMW 02 Series E10 phase 2 from 09/1973 to 07/1977:

Berline:
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Touring:
- 1802 90hp phase 2 from 08/1973 to 04/1974 (engine code M10B18)
- 2002 100hp (M10) phase 2 from 08/1973 to 04/1974 (engine code M05)
- 2002tii 130hp (M10) phase 2 from 08/1973 to 04/1974 (engine code M15)

Baur Targa convertible:
- 2002 100hp phase 2 from 08/1973 to 12/1975 (engine code M05)

Thisfront structure part is one of the parts with a lot of corrosion on the E10. It comes bare in black storage paint. Before the final painting, it is essential to treat and prepare it in order to prevent corrosion from reappearing.

High quality remanufactured part called "adaptable" because not coming from the manufacturer.

Passenger-side right-hand structural metal spar for BMW 02 Series E10:

Sedan :
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Touring :
- 1602 85hp phase 1 from 04/1971 to 09/1972 (engine code M116)
- 1800 90hp phase 1 from 09/1971 to 08/1973 (engine code M10B18)
- 2000 100hp phase 1 from 04/1971 to 08/1973 (engine code M05)
- 2000A auto 100hp phase 1 from 05/1971 to 09/1972 (engine code M05)
- 2000tii 130hp phase 1 from 01/1971 to 08/1973 (engine code M15)
- 1802 90hp phase 2 from 09/1973 to 04/1974 (engine code M10B18)
- 2002 100hp phase 2 from 09/1973 to 04/1974 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 04/1974 (engine code M15)

Cabriolet :
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa :
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

This repair plate , located vertically between the floor and the door sill, is a structural part of the chassis. Because of the box-like shape it forms with the outer spar, corrosion is often very present at this point on the E10.
The part is delivered bare with black storage paint. Before final painting, it is essential to treat and prepare it to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This body part is called "adaptable" because it does not come from the manufacturer.

Left-hand driver's side metal structural spar for BMW 02 Series E10:

Sedan :
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Touring :
- 1602 85hp phase 1 from 04/1971 to 09/1972 (engine code M116)
- 1800 90hp phase 1 from 09/1971 to 08/1973 (engine code M10B18)
- 2000 100hp phase 1 from 04/1971 to 08/1973 (engine code M05)
- 2000A auto 100hp phase 1 from 05/1971 to 09/1972 (engine code M05)
- 2000tii 130hp phase 1 from 01/1971 to 08/1973 (engine code M15)
- 1802 90hp phase 2 from 09/1973 to 04/1974 (engine code M10B18)
- 2002 100hp phase 2 from 09/1973 to 04/1974 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 04/1974 (engine code M15)

Cabriolet :
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa :
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

This repair plate , located vertically between the floor and the door sill, is a structural part of the chassis. Because of the box-like shape it forms with the outer spar, corrosion is often very present at this point on the E10.
The part is delivered bare with black storage paint. Before final painting, it is essential to treat and prepare it to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This body part is called "adaptable" because it does not come from the manufacturer.

Trunk Floor rear with the spare wheel housing for BMW 02 Series E10:

Berline:
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Cabriolet:
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa:
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

The corrosion in the trunk floor of the E10, is unfortunately a "classic" of the model.
This very high quality remanufacturing part will offer you the best solution to restore your 02'.

Right rear quarter floor passenger side length 67cm for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.

This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

Rear quarter floor left driver side length 67cm for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.

This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

Quarter floor right front passenger side length 67cm for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.

WARNING: For the right-hand drive (RHD) version, it does not include the raised part where the bottom bracket is fitted!

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.

This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

Quarter floor front left driver side length 67cm for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.

ATTENTION: For the left-hand drive (LHD) version, it does not include the raised part where the bottom bracket is fitted!

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by quarter-flooring will enable targeted bodywork restoration while respecting the original dimensions.

This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

Rear quarter panel for BMW 02 Series E10 Sedan phase 1 and phase 2 :

- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M118)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M118)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M118)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M116)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (M05 engine code)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (M05 engine code)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (M05 engine code)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

This plate joins the rear window frame to the rear seat back plate. Its replacement will ensure a quality restoration faithful to the original.

This body panel is delivered in black storage paint. It will need to be treated and prepared to prevent corrosion from reappearing.

This is an "adaptable" quality part, as it does not come from the manufacturer.

Exterior sheet metal from front A-pillar right passenger side for BMW 02 series E10 Sedan, Touring and Cabriolet:

Sedan :
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M118)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M118)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M118)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M116)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Touring :
- 1602 85hp phase 1 from 04/1971 to 09/1972 (engine code M116)
- 1800 90hp phase 1 from 09/1971 to 08/1973 (engine code M118)
- 2000 100hp phase 1 from 04/1971 to 08/1973 (engine code M05)
- 2000A auto 100hp phase 1 from 05/1971 to 09/1972 (engine code M05)
- 2000tii 130hp phase 1 from 01/1971 to 08/1973 (engine code M15)
- 1802 90hp phase 2 from 09/1973 to 04/1974 (engine code M118)
- 2002 100hp phase 2 from 09/1973 to 04/1974 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 04/1974 (engine code M15)

Cabriolet :
- 1600-2 85hp phase 1 from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp phase 1 from 01/1971 to 06/1971 (engine code M05)

The hinges and door-holding bracket forming the rear part of the A-pillar are not supplied.

This repair plate , located above the inner A-pillar plate, is one of the most frequently corroded parts on the E10. It is supplied bare, in grey or black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

This bodywork part is called "adaptable" because it does not come from the manufacturer.

Complete left half floor on driver's side for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

ATTENTION: For the LHD left-hand drive version, the opening for the pedal box must be made (a marking is present on the part), the floor being full without a hole so that it can also be adapted to the RHD right-hand drive version!

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Replacing them in their entirety will enable the body to be restored to its original dimensions.

This half-floor, comprising in 1 piece the front and rear sections (from the firewall to the rear seats), is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.