Damper pulley for BMW Serie 1 - E81 E82 E87 E88

Crankshaft pulley with vibration dampers for BMW 1 series E87 Sedan 5 doors phase 1 :

- 118d 122hp from 02/2003 to 02/2007 (engine code M47D20TU2)

- 120d 163hp from 03/2003 to 02/2007 (engine code M47D20TU2)

During assembly, it is essential to observe the tightening torque (see manual), and also to replace the central screw (part no. BC35983, available separately on our website).

Don't forget to replace the spacer washer on your old damper pulley.

Fixing screw included.

When mounting, you must respect the tightening torque (see manual) but you must also replace the central screw (supplied with the pulley)
Don't forget to put the spacer washer back on your old one

Crankshaft pulley screw for BMW series 1 E87 Sedan 5 doors phase 1 :

- 118d 122hp from 02/2003 to 02/2007 (engine code M47D20TU2)
- 120d 163hp from 03/2003 to 02/2007 (engine code M47D20TU2)

During the assembly, it is imperative to respect the tightening torque (see manual).
Don't forget to put back the spacer washer present on your old damper pulley.

Quantity needed to fix the damper pulley : 1

Threading : M18x1,5mm
Length : 121mm
Head : with collar
Wrench opening : 22mm

Damper pulley with vibration dampers for BMW 1 Series E81 3-door sedan , E87, E87LCI 5-door sedan, E82 Coupé and E88 Cabriolet:

E81 3-door sedan :
- 116i 115hp from 04/2007 to 12/2011 (engine code N45B16)
- 118i 2.0L 129hp from 09/2006 to 12/2011 (engine code N46B20)
- 120i 150hp from 09/2006 to 10/2011 (engine code N46B20)

E87 5-door sedan phase 1 :
- 116i 115hp from 05/2006 to 02/2007 (engine code N45B16)
- 118i 2.0L 129hp from 05/2006 to 02/2007 (engine code N46B20)
- 120i 150hp from 05/2006 to 02/2007 (engine code N46B20)

E87LCI 5-door sedan phase 2 :
- 116i 115hp from 02/2006 to 06/2011 (engine code N45B16)
- 118i 2.0L 129hp from 10/2006 to 06/2011 (engine code N46B20)
- 120i 150hp from 09/2006 to 06/2011 (engine code N46B20)

E82 Coupé :
- 120i 150hp from 06/2009 to 10/2013 (engine code N46B20)

E88 Cabriolet :
- 118i 2.0L 129hp from 03/2008 to 09/2013 (engine code N46B20)
- 120i 150hp from 11/2006 to 10/2013 (engine code N46B20)

Technical specifications :
- Outside diameter: 141mm
- Inside diameter: 36mm
- Width: 38mm
- Number of grooves: 6 (PK6)
- Distance between 4 holes: 49mm

ATTENTION: Not suitable for E87 phase 1 116i, 118i and 120i produced from 03/2003 to 04/2006!

When fitting the crankshaft pulley, it is imperative to comply with the tightening torque (see manufacturer's recommendations) and also to replace the central screw (part no. BC35988, to be ordered separately on our site).

INFORMATION: You can recover the 4 M8x20 cylindrical fixing screws from your old pulley.

This product is not supplied with the screws.

FEBI damper pulley screw for BMW 1 series E81 3-door sedan , E87, E87LCI 5-door sedan, E82 Coupé and E88 Cabriolet:

E81 3-door sedan :
- 116i 115hp from 04/2007 to 12/2011 (engine code N45B16)
- 118i 2.0L 129hp from 09/2006 to 12/2011 (engine code N46B20)
- 120i 150hp from 09/2006 to 10/2011 (engine code N46B20)

E87 5-door sedan phase 1 :
- 116i 115hp from 03/2003 to 02/2007 (engine code N45B16)
- 118i 2.0L 129hp from 07/2004 to 02/2007 (engine code N46B20)
- 120i 150hp from 03/2003 to 02/2007 (engine code N46B20)

E87LCI 5-door sedan phase 2 :
- 116i 115hp from 02/2006 to 06/2011 (engine code N45B16)
- 118i 2.0L 129hp from 10/2006 to 06/2011 (engine code N46B20)
- 120i 150hp from 09/2006 to 06/2011 (engine code N46B20)

E82 Coupé :
- 120i 150hp from 06/2009 to 10/2013 (engine code N46B20)

E88 Cabriolet :
- 118i 2.0L 129hp from 03/2008 to 09/2013 (engine code N46B20)
- 120i 150hp from 11/2006 to 10/2013 (engine code N46B20)

Technical specifications :
- Thread: M16x1.5mm
- Length: 117m
- Length under head: 74mm
- Head: with collar
- Key opening: 22mm

INFORMATION: This screw set includes the crankshaft pulley screw and the 2 M10x1x86 collar screws securing the camshaft phasing units.

When fitting, it is essential to observe the tightening torque (see manufacturer's recommendations).

Quantity required to fit damper pulley: 1

Crankshaft vibration shock absorber pulley.

For E81 & E87 LCI:
- 116 d N47
- 118 d N47
- 120 d N47

For E82:
- 118 d N47
- 120 d N47

For E88:
- 118 d N47
- 120 d N47 Comes with the 4 fastening screws