Security for Volkswagen Golf 5

With the Venus wheel lock, your vans, caravans or motorhome will be kept safe and secure.

Easy to install
Clamped at both ends of the wheel.
Locking system with 2 keys.
Min/max spacing : 188/255 mm. A simple and effective way to protect your vehicle from malicious intent! Give your car a deterrent effect with this reinforced boot.

Length of the strap: 213 cm
Width of the strap: 4.7 cm
Length of the locking system: 32 cm

A thumbwheel at the automatic inertia reel adjusts operation of the ball-locking system so the seat belts can be placed in any position. Sold per unit
Built to request, allow approximately 4 weeks for delivery

Length of the strap: 270 cm
Width of the strap: 4.7 cm
Length of the locking system: 15 cm

A thumbwheel at the automatic inertia reel adjusts operation of the ball-locking system so the seat belts can be placed in any position. Sold per unit
Built to request, allow approximately 4 weeks for delivery

Length of the strap: 270 cm
Width of the strap: 4.7 cm
Length of the locking system: 15 cm

A thumbwheel at the automatic inertia reel adjusts operation of the ball-locking system so the seat belts can be placed in any position. Sold per unit
Built to request, allow approximately 4 weeks for delivery

With inertia reel (often for 2-door commercial vehicles)
Length of the strap: 376 cm
Width of the strap: 4.7 cm
Length of locking system: 48 cm Sold per unit.
Only works with the inertia reel in the vertical position.
Built to request, allow approximately 4 weeks for delivery

Adjustable 2-point static safety belt.
Colour: Black
Length of the belt: 1200 mm
Width of the belt: 47 mm
Position: front / rear / left / right, sold individually.
European approval.

Adjustable static seatbelt with 2 mounting points.
Colour: Black
Length of the strap: 1,200 mm
Width of the strap: 47 mm
Position :front/rear/left/right, sold per unit.
Type-approved in Europe.

Length of strap: 291 cm
Width ofthe strap: 4.7 cm
Length of the locking system: 30 cm Sold per unit.
Onlyoperates with the inertia reel in the vertical position, supplied with adaptor bracket.

The BLAZECUT system is an automatic extinguisher, consisting of a flexible tube with a very simple pressurised product, which is installed in the engine compartment. When an abnormal levelof heat is detected, the tube explodes as the result of a build-up of pressure and blows out the fire like a candle, thus safeguarding your preciousvehicle and perhaps even your lives! What's more, the FE-36 product contained is a clean agent, as it is non-corrosive and does not leave any residue. It can therefore be easily cleaned following covert damage.

Length: 2 metres Covers 0.69 m3 at 80°c

The system is functional and pressurised when the indicator is greater than 0 bar. The pressure indicationchanges depending on the ambient temperature: the pressure at 20°c is approximately 2 bar, at 90°c approximately 10 bar, and the tube explodes and releases the FE-36 product when the pressure reaches 20 bar. Because the trigger is activated under pressure, this product cannot be shipped by aeroplane. Cannot be shipped by Express transport or to the islands or abroad

Length of the strap:270 cm
Width of the strap: 4.7 cm
Length of the locking system: 30 cm

A thumbwheel at the automatic inertia reel adjusts operation of the ball-locking system so the seat belts can be placed in any position. Sold per unit.

Length of strap: 220 cm
Width of the strap: 4.7 cm
Length of the locking system: up to 47 cm Sold per unit

Length of strap: 291 cm
Widthof the strap: 4.7 cm
Length of the locking system: 30 cm Sold per unit.
Only operates with the inertia reel in the vertical position, supplied with adaptor bracket.
Caution : the inertia reel must be vertically-mounted for correct operation.
Built to request, allow approximately 4 weeks for delivery

Length of the band: 270cm
Width of theband: 4.7cm
Length of the locking system: 32cm

An adjustment wheel at the level of the inertia reel results to settle the functioningof the ball blocking system to build belts in any position.

Length of the strap: 270 cm
Width of the strap: 4.7 cm
Length of the locking system: 32 cm

A thumbwheel at the automatic inertia reel adjusts operation of the ball-locking system so the seat belts can be placed in any position. Sold per unit.

This pair of XL Milenco recovery boards, measuring 105 cm in length and 30 cm in width, is designed for off-road vehicles, SUVs, vans and motorhomes tackling difficult terrain. Their lattice design provides firm grip under driving wheels on muddy, snowy or sandy ground, without slipping. Stackable, they allow you to double their coverage in length or width depending on terrain constraints, and can be stored flat without taking up boot or storage space. Easy to clean, they are a reliable safety accessory to keep on board for any outing on soft terrain.

Length of strap: 291 cm
Width of thestrap: 4.7 cm
Length of the locking system: 15 cm Sold per unit.
Does not workwith an inertia reel in the vertical position.
Caution : the inertia reel must be vertically-mounted for correct operation.

MILENCO recovery tracks are designed to assist any driver whose vehicle becomes immobilised on unstable, muddy, sandy or snowy ground. Sold as a pair, they are placed under the driving wheels: the surface irregularities grip the tyres and restore the traction needed to reach firm ground. Their reliefs are identical on both sides, which facilitates their positioning regardless of the situation. A practical safety accessory to carry in any classic car during outings on varied terrain.

Inertia reel seatbelt with 2 mounting points.
Colour: Black
Length of the strap: 1100 mm
Width of the strap: 47mm
Length of the locking system: 220 mm
Position : front/rear/left/right, sold per unit.
Type-approved in Europe.

FIAMMA GRIP SYSTEM recovery plates are sold in a set of 2 and are designed for classic vehicle owners who venture onto demanding terrain. They are positioned under the drive wheels to regain traction on snow-covered, muddy or sandy ground, whether as a preventive measure before tackling a difficult passage or as an emergency solution once the vehicle is immobilised. The plates can be assembled together to increase the available traction surface. A discreet but useful accessory to keep on board a classic vehicle intended for regular use.

Non-rechargeable powder
CE Standard
Supplied with its plastic holder.

Length of strap: 291 cm
Width of the strap: 4.7 cm
Length of the locking system: 30 cm Sold per unit.
Only operates with the inertia reel in the vertical position, supplied with adaptor bracket.
Built to request, allow approximately 4 weeks for delivery

Stoplock steering wheel lock for steering wheels with airbags.
Made from high-quality reinforced steel and designed for vehicles with wide steering wheels such as 4x4s, pick-ups and vans.
This anti-theft device features an LED warning light for added deterrence at night.
- Hardened steel with polyurethane foam
- Anti-marting
- 10,000 different combinations
- Universal for large steering wheels.
Supplied with 2 keys.

Length of strap: 291 cm
Width of the strap: 4.7 cm
Length of the locking system: 30 cm Sold per unit.
Only operates with the inertia reel in the vertical position, supplied with adaptor bracket.
Built to request, allow approximately 4 weeks for delivery

4-point OMP Racing safety harness.

Wide black chest strap for improved safety and comfort.

Quick mounting with screw rings affixing into eyelets.
Means it can be quickly fitted and removed.

1 push-button release buckle:
- at lap level

CEE approved Width of straps:
- 75 mm for shoulder straps
- 50 mm for lap straps

Length of the strap: 270 cm
Width of the strap: 4.7 cm
Length of the locking system: 30 cm

A thumbwheel at the automatic inertia reel adjusts operation of the ball-locking system so the seat belts can be placed in any position. Sold per unit
Built to request, allow approximately 4 weeks for delivery

With inertia reel (often for 2-door commercial vehicles)
Length of the strap: 376 cm
Width of the strap: 4.7 cm
Length of locking system: 48 cm Sold per unit.
Only works with the inertia reel in the vertical position.

Length of strap: 220 cm
Width of the strap: 4.7 cm
Length of the locking system: up to 47 cm Sold per unit
Built to request, allow approximately 4 weeks for delivery

Adjustable static seatbelt with 2 mounting points.
Colour: Red
Length of thestrap: 1,200 mm
Width of the strap: 47 mm
Position : front/rear/left/right, sold per unit.
Type-approved in Europe. Built to request, allow approximately 4 weeks for delivery

Strap length: 220cm
Strap width: 4.7cm
Locking system length: 45cm Sold individually

2-point retractable safety belt.
Color: Black
Belt length: 1100 mm
Belt width: 47 mm
Rigid locking system length: 170 mm
sold individually
Approved in Europe.

Length of strap: 291 cm
Width of the strap: 4.7 cm
Length of the locking system: 15 cm Sold per unit
Built to request, allow approximately 4 weeks for delivery
Caution : theinertia reel must be vertically-mounted for correct operation.

Adjustable static seatbelt with 2 mounting points.
Colour: Beige
Length of the strap: 1200 mm
Width of the strap: 47 mm
Position : front/rear/left/right, sold per unit.
Type-approved in Europe. Built to request, allow approximately 4 weeks for delivery

Length of strap: 220 cm
Width of the strap: 4.7 cm
Length of the locking system: up to 47 cm Sold per unit
Built to request, allow approximately 4 weeks for delivery