This KERSCHER steering rack is of German quality. This kit allows the installation of a rack and pinion steering. If it is mounted on the steering box mounts, it requires mechanical skills and precise welding, mainly at the steering column level. This rack is delivered with the necessary spacers and seals to slightly raise the tank of the oldest models. Delivered with homologation documents. !!!Not suitable for narrowed front axles!!! Even on an original front axle, it is possible that the rack comes into contact with the left front suspension shock absorber. There are then two possibilities: 1- Remove the rack protection and add an additional stop of 20mm to the 15mm Teflon stop in the rack. 2- Shorten the rack rod and its rubber protection sleeve.
Complete rack kit for VW: Easy installation without modification, the rack uses the mounting points of the steering damper and at the old box level. Only one weld is required at the new steering column axis provided. Sold without front axle. The kit is TÜV German approved ONLY but not in Switzerland, Spain, or France. It comes with an assembly manual (in German and English). This rack has been the subject of a detailed installation article in the technical magazine "VW Tech" No. 89 ref. VF02689 (Part 1).