Brake calipers for Volkswagen Passat B4

This 54mm ATE front brake caliper piston for VAG is compatible with models equipped with ATE front brake calipers and ventilated discs from 20 to 25mm thick.

Compatible models:

- AUDI A3 8L

- AUDI A3 8P (Sportback 2.0L TDI and 1.6L)

- VW CADDY III

- VW BORA

- VW GOLF IV ( TDI and VR5)

- VW GOLF V, and GOLF PLUS

- VW JETTA III

- VW NEW BEETLE

- VW PASSAT B4 (16V and VR6)

- VW POLO 9N

- VW VENTO

Girling front brake caliper bracket for Volkswagen Golf 2, Golf 3, Corrado, Passat

For models with Girling braking system and 280x22mm discs

Please check your caliper brand before ordering

For VW Golf 2 :

- 1.8 G60 160hp (PG)

- 1.8 Rallye G60 (1H)

For VW Corrado :

- 1.8 G60 160hp (PG)

- 2.9 VR6 190hp (ABV)

For VW Golf 3 :

- 2.0 GTI 8S 115hp (2E, ADY)

- 2.0 GTI 16S 150hp (ABF)

- 2.8 VR6 174hp (AAA)

- 2.9 VR6 190hp (ABV)

For Passat B4 and B5 :

- All models with 280x22mm front discs

Original Volkswagen part

The brake bleed screw cap is a small fitting found at the end of the bleed screw on braking systems. Its main purpose is to protect the bleed screw from dirt, moisture and oxidation. In addition to this protection, it helps maintain the pressure in the braking system and prevents any leakage of brake fluid during servicing.

This protective rubbercap is suitable for bleed screws on wheel cylinders, brake calipers and clutch master cylinders.

Check: Once bleeding is complete and the screw has been tightened to the correct torque, fit the cap firmly onto the screw head to ensure it completely covers the bleed port.

Original part number:

211611483