Thermostat for Volkswagen Scirocco 1 and 2

Water thermostat - calorstat low temperature

Suitable for :
- Golf 1 & Jetta 1 : 1.5 to1.8 gasoline & Diesel
- Golf 2 & Jetta 2 : 1.6 & 1.8 gasoline
- Golf3 & Vento : 1.6 & 2.0 gasoline
- Corrado : 1.8 & 2.0 Open 75°C

Water thermostat - calorstat low temperature

Suitable for :
- Golf 1 & Jetta 1 :1.5 to 1.8 Gasoline & Diesel
- Golf 2 & Jetta 2 : 1.6 & 1.8 Gasoline
- Golf 3 & Vento : 1.6 & 2.0 Gasoline
- Corrado : 1.8 & 2.0 Opening at 71 ° C

This gasket is fitted between the water pump and the thermostat housing, and also between the engine block and the water pump on certain models.

Diameter: 50 mm
Thickness: 4 mm

For VW 4-cylinder petrol and diesel engines

Suitable for Scirocco :
- 1.1 50cv (FA, GG)
- 1.1 52cv (FJ)
- 1.3 54cv (HK)
- 1.3 60cv (GF, GS) Thermostat - calorstat on water pump
Opening: 92°C

For Golf 1 and Scirocco:
- 1.1 50hp (FA, GG)
- 1.3 60hp (GF)

For Golf 2:
- 1.0 45hp (GN)
- 1.3 55hp (HK)

For Polo 86C:
- 1.05 40hp (GL)
- 1.1 50hp (HB)
- 1.3 54hp (HK)
- 1.3 75hp (GK)
- 1.358hp and 60hp (HJ, HH)

For Polo 86:
- All models 0.9 to 1.3

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 35 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 28 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 25 mm

Comes with wiring, relays and clamps

This device replaces the original radiator temperature sensor switch.
For triggering the original or replacement SPAL electric cooling fan

Setting range: 70 to 120 °C
Thread: M14 x 1.5 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 38 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 32 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 45 mm

Comes with wiring, relays and clamps

This coolant thermostat housing is a new part designed to replace a worn, cracked or faulty component on a classic vehicle. It ensures the thermostat is held in place and provides a seal for the cooling circuit, thereby contributing to proper thermal management of the engine. As part of a restoration or careful maintenance programme, replacing this housing allows you to restore original functioning. An essential part for preserving the reliability and longevity of a classic engine.