Wing repair

The original quality INOX split rear wing screw for Citroën Traction is true to the original.
This high-grade stainless steel slotted head screw secures the rear fender vertical joint to the body. You'll need 3 per rear wing.

The original quality stainless steel rear wing slotted screw for 2cv saloons is true to the original.

This high quality stainless steel slotted screw secures the vertical rear wing seal to the body. You will need 4 per rear wing.

The original quality STAINLESS STEEL rear wing slotted screw for 2cvs before 1970 is true to the original.

This high quality stainless steel slotted screw secures the vertical rear wing seal to the body. You will need 4 per rear wing.

This inner rear wing securing screw for DYANEs - 6.3x19mm attaches the rear wing to the body.

You will need 3 per rear wing to attach them to the body. Made of stainless steel, it also attaches the upper wing moulding and requires a rubber washer to ensure a tight fit.

This inner rear wing securing screw for 2cvs before 1970 - 6.3x19mm attaches the rear wing to the body.

You will need 3 per rear wing to attach them to the body. Made of stainless steel, it also attaches the upper wing moulding and requires a rubber washer to ensure a tight fit.

This inner rear wing securing screw for 2cvs - 6.3x19mm attaches the rear wing to the body.

You will need 3 per rear wing to attach them to the body. Made of stainless steel, it also attaches the upper wing moulding and requires a rubber washer to ensure a tight fit.

This PARKER rear wing screw clip for 2cvs before 1970 enables you to attach the rear wing inner screws.

You will need 3 per rear wing.

This PARKER rear wing screw clip for 2cv saloons enables you to attach the rear wing inner screws.

You will need 3 per rear wing.

This PARKER rear wing screw clip for DYANEs enables you to attach the rear wing inner screws.

You will need 3 per rear wing.

This rear wing fixing screw is compatible with all Citroën ID sedans from 05/1967.
This stainless steel screw is M12x1.25.
This screw is different from pre-May 1967 models, which had a flanged head.
Compatible models:ID 19/20 Sedans (1985cc) - (05/1967-1971)

Right rearfenderarch for Mercedes E-Class:
- Compatible with all Mercedes E-Class W210 Sedan and S210 Estate versions from 06/1995 to 03/2003 including sport model type E55 AMG.

Lower front wing repair panel for MX-5 NA

For NA all models
Left side (driver)

The MX-5 NA is prone to sill corrosion. To effectively stop its progression, you often have to cut out the part affected by the corrosion and weld on a new panel
This galvanised steel panel enables you you to make this repair at a lower cost

Left rear fender for Renault 5 (1972-1984)

For Renault 5 all 4-door models from 1972 to 1984
Left side (driver)

This high-quality, electro-galvanized rear fender repair sheet for Renault 5 will replace a rear fender arch damaged by impact or corrosion.

Tôle de réparation du coin inférieur d'aile arrière gauche pour VW Combi Split Brésilien de 1957 à 1975.
Pour modèles à petits feux et petits parechocs.

Lower front wing repair panel for Mazda MX-5 NB and NBFL

For NB and NBFL all models
Left side (driver)

The MX-5 NB is prone to lower body corrosion. To effectively stop its progression, you often have to cut out the part affected by the corrosion and weld on a new panel
This galvanised steel panel enables you you to make this repair at a lower cost

Right rear passengerfender repair panel for Volkswagen Polo 3 phase 1 type 6N1:

- All 5-door models from 09/1994 to 09/1999

WARNING: Not suitable for 3-door version!

This repair sheet allows you to replace only the part of the rear fender most exposed to corrosion or impact, thanks to the cut-and-weld method. It is delivered bare or in black stock paint, depending on what our suppliers supply. Before final painting, it is essential to treat and prepare it to prevent corrosion from reappearing.

This bodywork part is called "adaptable" because it does not come from the manufacturer.

Rear wheelarch leftside Mercedes

For all S-Class W116 models (1972-1981)
Left side

High quality electro-galvanised steel

Right front wheel arch side plate for VOLKSWAGEN Combi SPLIT from 03/1955 to 07/1967.

Wheel well edge side panel for Peugeot 205
This Right rear wheel well repair sheet for Peugeot 205 mounts on the outside.

Suitable only for the models below:

Peugeot 205 Phase I, 3 and 5 door versions

- 205 1.0 L - 45hp from 02/1983 to 10/1987
- 205 1.1 L - 49hp from 02/1983 to 10/1987
- 205 1.1 L - 50hp from 02/1983 to 10/1987
- 205 1.4 L - 60hp from 02/1983 to 10/1987
- 205 1.4 L - 72hp from 02/1983 to 10/1987
- 205 1.4 L - 80hp from 02/1983 to 10/1987
- 205 1.4 L - 79hp from 10/1985 to 10/1987
- 205 1.5 L - 86hp from 02/1984 to 10/1987
- 205 1.6 L - 72hp from 03/1987 to 10/1987
- 205 1.6 L - 75hp from 08/1986 to 10/1987
- 205 Diesel 1.7 L - 60hp from 08/1983 to 10/1987

Peugeot 205 Phase II, 3 and 5 door versions

- 205 1.0 L - 45hp from 10/1987 to 09/1998
- 205 1.1 L - 60hp from 07/1989 to 09/1998
- 205 1.1 L - 54hp from 10/1987 to 07/1992
- 205 1.1 L - 49hp from 10/1987 to 10/1990
- 205 1.4 L - 72hp from 01/1987 to 07/1988
- 205 1.4 L - 84hp from 06/1987 to 12/1989
- 205 1.4 L - 86hp from 06/1987 to 12/1989
- 205 1.4 L - 79hp from 07/1988 to 05/1989
- 205 1.4 L - 75hp from 07/1988 to 09/1998
- 205 1.4 L - 60hp from 10/1987 to 05/1989
- 205 1.4 L - 67hp from 10/1987 to 10/1990
- 205 1.4 L catalyzed - 60hp from 08/1987 to 09/1993
- 205 1.6 L - 72hp from 10/1987 to 09/1998
- 205 1.6 L - 75hp from 10/1987 to 09/1998
- 205 1.6 L - 90hp from 08/1990 to 07/1992
- 205 Automatic 1.6 L - 79hp from 10/1987 to 09/1998
- 205 Automatic 1.6 L - 88hp from 05/1990 to 09/1998
- 205 GTX 1.6 L - 94hp from 01/1987 to 10/1991
- 205 Diesel 1.7 L - 60hp from 07/1987 to 09/1998
- 205 TD 1.7 L - 78hp from 01/1990 to 09/1998
- 205 Diesel 1.9 L - 64hp from 10/1987 to 09/1998

Connection plate sandwiched between the right rear side panel and the right rear side panel corner plate for VW Transporter T25 from 1979 to 1992 including syncro and pick-up.