Wheel weels

For Golf 4 2002 ->2006 and Bora 1999 ->2005

For Golf 4 from 2002 ->2006 and Bora 1999 ->2005

Rear right-hand shock absorber support repair panel
Version with original compensator bar.

For Beetle:
- 1300, 1500, (modification) 08/1966 ->07/1967
chassis no. 117 000 001 ->117 999 000.
- 1300, 1500, 1302, 1303 from 08/1967->
chassis no.118 000 001 ->
- 1200 from 08/1973->
from chassis no.114 2000 001->

This repair plate is located at the rear of the front wheel arch and at the front of the floor pan. Also referred to as the front jacking point repair or floor pan repair. The front jacking point stump attaches to this part.

On the Golf 2, it is very common for this part of the vehicle to rust out or succumb to damage from being jacked up incorrectly.

This repair plate is located at the rear of the front wheel arch and at the front of the floor pan. Also referred to as the front jacking point repair or floor pan repair. The front jacking point stump attaches to this part.

On the Golf 2, it is very common for this part of the vehicle to rust out or succumb to damage from being jacked up incorrectly.

Rear left-hand shock absorber support repair panel
Version with original compensator bar.

For Beetle:
- 1300, 1500, (modification) 08/1966 ->07/1967
chassis no. 117 000 001 ->117 999 000.
- 1300, 1500, 1302, 1303 from 08/1967->
chassis no.118 000 001 ->
- 1200 from 08/1973->
from chassis no.114 2000 001->

Protective sheet to be stuck on the bottom of the rear wheel arch to protect the original body kit against splashes

Pointed appearance" as per original"

Protective sheet to be stuck on the bottom of the rear wheel arch to protect the original body kit against splashes

Pointed appearance" as per original"

To weld in the box to put the screws on the wing

Complete right rear wheel arch DANSK for Porsche 911 type F and 912 Targa from 1967 to 1973 :
- Porsche 911 type F Targa :
- 911 2.0 from 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 1969 911 2.0 T / E / S- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973
- Porsche 912 Targa :
- 912 1.6 from 1967 to 1969

Suitable for all Saloon and Touring models

Front right lower mudguard cover for BMW 3 series E46 Sedan and Touring phase 1 and phase 2 from 04/1997 to 07/2005 :

- All petrol and diesel models (except M3)

WARNING: Not suitable for Pack M!

This fender cover is located at the bottom front in the extension of the wheel-arch cover and is sold without screws or fasteners.

Suitable for all Coupé & Cabriolet models
(except M3)

Lower protective cover under the engine compartment for BMW series 3 E46 Saloon, Compact, Touring, Coupé and Cabriolet diesel from 03/2001:

Sedan:
- 318d 2.0L 116hp phase 2 from 03/2001 to 02/2003 (engine code M47D20)
- 318d 2.0L 116hp phase 2 from 03/2003 to 01/2005 (engine code M47D20TU)
- 320d 136hp phase 1 from 03/2001 to 09/2001 (engine code M47D20)
- 320d 150hp phase 2 from 03/2001 to 05/2005 (engine code M47D20TU)
- 330d 184hp phase 1 from 03/2001 to 08/2001 (engine code M57D30)
- 330d 184hp phase 2 from 09/2001 to 04/2003 (engine code M57D30)
- 330d 204hp phase 2 from 08/2002 to 02/2005 (engine code M57D30TU)

Compact:
- 318td 2.0L 115hp phase 2 from 01/2003 to 12/2004 (engine code M47D20TU)
- 320td 150hp phase 1 from 03/2001 to 03/2003 (engine code M47D20TU)
- 320td 150hp phase 2 from 04/2003 to 12/2004 (engine code M47D20TU)

Touring:
- 318d 2.0L 116hp phase 2 from 10/2001 to 07/2005 (engine code M47D20TU)
- 320d 136hp phase 1 from 03/2001 to 08/2001 (engine code M47D20)
- 320d 150hp phase 2 from 03/2001 to 07/2005 (engine code M47D20TU)
- 330d 184hp phase 1 from 03/2001 to 08/2001 (engine code M57D30)
- 330d 184hp phase 2 from 09/2001 to 03/2003 (engine code M57D30)
- 330d 204hp phase 2 from 09/2002 to 07/2005 (engine code M57D30TU)

Cut :
- 320cd 150hp from 03/2003 to 05/2006 (engine code M47D20TU)
- 330cd 204hp from 08/2002 to 05/2006 (engine code M57D30TU)

Convertible:
- 320cd 150hp from 01/2005 to 08/2006 (engine code M47D20TU)
- 330cd 204hp from 11/2004 to 08/2006 (engine code M57D30TU)

ATTENTION: Not suitable for xd 4 wheel drive versions!

Quality part called "adaptable" because it does not come from the manufacturer. Depending on the models, it may require a cutout for the oil pan.

Suitable for all Coupé & Cabriolet models
(except M3)

Suitable for all Saloon and Touring models
Except 530i, 535i, 540i, M5 and "M design"

Front left shock absorber bracket for Fiat 500 F, L and R -1965-1975)

To be mounted on the right (passenger) side, level with the suspension wishbone

Made in Italy

For models listed below:
- Fiat 500 F from 1965 to 1968
- Fiat 500 L from 1968 to 1972
- Fiat 500 R from 1972 to 1975

Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Front left shock absorber bracket for Fiat 500 F, L and R (1965-1975)

To be mounted on the left (driver) side, at the level of the suspension wishbone.

Made in Italy

For models listed below:
- Fiat 500 F from 1965 to 1968
- Fiat 500 L from 1968 to 1972
- Fiat 500 R from 1972 to 1975

Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.