Wing moulding

For Saloon, Touring & Compact:
Suitable for standard version (not for M3 or versions with "M design")

This left and right rear wing moulding for 2cv saloons - STAINLESS STEEL is an excellent quality accessory.

Identical on both the right and left, it attaches between the rear wing and the body with special screws.
The upper bead of this moulding is visible and acts as an upper rear wing cover.
The stainless steel used for this moulding, above and beyond its quality look, prevents the oxidation which tarnishes mouldings of aluminium origin.

Black and chrome rear fender flange left for Volkswagen Golf 1 Cabriolet
For VW Golf 1 Cabriolet all models from 1981 to 1989
Left side (driver)
Genuine Volkswagen part

This rear wing strip for 2cvs - aluminium connects the rear wings and the body.

Identical on both the right and left, this wing cover attaches between the rear wing and the body with special screws. Its upper bead is visible and acts as an upper rear wing cover.

This rear wing strip for 2cvs before 1970 - aluminium connects the rear wings and the body.

Identical on both the right and left, this wing cover attaches between the rear wing and the body with special screws. Its upper bead is visible and acts as an upper rear wing cover.

Baguette d'aile avant gauche 53mm autocollante pour Volkswagen Golf 3 :

- Tous modèles (y compris Cabriolet)

INFORMATION : Cette pièce n'étant plus produite et n'étant plus disponible sur le marché, nous vous offrons cette alternative adhésive; elle se colle à l'aide d'un scotch double face puissant mais ne se clipse pas comme à l'origine.

Polished stainless steel strips to cover the ventilation holes.
Length 30 cm, width 6 mm
2 x 10 rods
Each rod is equipped with 3 hooking pins.
Attaches with drilling or glueing.

For VW Split Window Camper - Deluxe version
Years: 08/1963 ->07/1967

This left and right rear wing moulding for 2cvs before 1970 - STAINLESS STEEL is an excellent quality accessory.

Identical on both the right and left, it attaches between the rear wing and the body with special screws.
The upper bead of this moulding is visible and acts as an upper rear wing cover.
The stainless steel used for this moulding, above and beyond its quality look, prevents the oxidation which tarnishes mouldings of aluminium origin.

Suitable for E46 Saloon and Touring
Plain black model

Baguette d'aile avant droite 53mm autocollante pour Volkswagen Golf 3 :

- Tous modèles (y compris Cabriolet)

INFORMATION : Cette pièce n'étant plus produite et n'étant plus disponible sur le marché, nous vous offrons cette alternative adhésive; elle se colle à l'aide d'un scotch double face puissant mais ne se clipse pas comme à l'origine. 

Colour satinblack
Width 55 mm

For 2 and 4-door Golf 1 Saloon,
from chassis 175 3336 185->

Suitable for E46 Saloon and Touring (Estate)
Plain black model

Stainless steel moldings on air vents for VW Combi Split from 03/1963 to 07/1967

Polished stainless steel strips to cover ventilation slots.
Length 26 cm, width 6 mm
2 x 9 rods
Each rod has 3 hooking pins.
Fixing by drilling or gluing.

For VW Combi Split Bus in Deluxe version
Years: 03/1955 ->1963
Chassis : Up to ->1 080 104

Left wing protective strip for Volkswagen Passat B3 (35i).

Colour: graphite

Rear left wing strip for Passat 35i phase 1 Estate up to ->10/1993
Colour: graphite black

ForScirocco 84 ->92,
with wheel well covering
(plastic wing extensions)

STAINLESS STEEL mouldings on air vents for Brazilian VW Combi Split from 1957 to 1975.