Windows moldings

Universal chrome-plated flat molding that can be mounted for a windshield seal, rear window or for windows.

Technical details:
Width: 8 mm
Height: 7 mm

Sold in rolls of 4.12m (cut to size)

Plastic chrome trim
Delivered in rolls of 2.50 m length

Flat chrome-plated windshield, rear window or side windowmoulding for VW Transporter T25 / T3, Bus, Van, Caravelle, Westfalia from 05/1979 to 07/19924.12 m roll (cut to size).Supplied without clasp.Original Volkswagen Classic Parts.

Complete set of aluminum moldings for Deluxe window seals, windshield, rear window and 2 side windows (with slot for snap ring).
For VW Beetle Sedan models: 1200, 1300, 1500, 1302 from 08/1964 to 07/1971 and from chassis N° 115 000 001 to N° 111 3200 000.

Chrome-plated clasp clip on flat molding for window surround for VW Transporter T25 / T3, Bus, Van, Caravelle, Westfalia from 05/1979 to 07/1992.Sold individually.Original Volkswagen Classic Parts.

You need 2 clips for the windshield, 1 for each side glass, 1 or 2 for the rear windowdepending on the model

For fixing the roof 'gutter'
Requires:
- 22 parts for a Golf 3 Saloon
- 20 parts for a Vento and Golf 3 Estate

Cierre previsto para anillo DeLuxe de aluminio.
Sin patade fijación (enganche)
Se vende por unidades.

The Body Moulding Closure Clip is a small component used to secure decorative and protective mouldings or trim to the body of a vehicle. These moldings are often used to enhance vehicle aesthetics, protect body edges or improve aerodynamics.The clip is designed to hold the molding firmly in place, while allowing relatively easy assembly and disassembly if required. It ensures that the molding remains securely in place despite vibrations and driving conditions.It's important to buy clips specific to the make and model of your vehicle to ensure a good fit.This clasp is designed for use with Deluxe aluminum snap-on connectors fitted to VW Combi Bay Window models from 08/1967 to 07/1979.This clasp is essential for joining the molding when it is fitted around the window. Unlike Cal Look joints, the moulding joint is equipped with an additional slot for fastening.Without fixing tab (hook).Sold individually.

Set of 2 half aluminum moldings, black finish, for the Porsche rear window on the Porsche 911 and 911 / 930 Turbo :

-> Porsche 911 :
- 911 3.0 SC Coupe from 1980 to 1983
- 911 Carrera 3.2 Coupe from 1984 to 1989

-> Porsche 930 :
- 930 Turbo 3.3 Coupe from 1980 to 1989

The black finish is standard from 1980 on 911. However, it was present in the catalog, optional, from 1974. If you have an aluminum finish, you can point to RS12522

2 RS12531 Molding Fittings will be required for mounting (1 top and 1 bottom) sold separately

Clip for T-shaped chrome-plated moulding on windscreen or rear window. 18 x 50 mm.

For Karmann-Ghia type 14, 01/66 ->07/1974
All Coupé and Cabriolet models.
Chassis no. 146 530 703 ->

Aluminium rear window moulding with T-shaped profile

For Karmann-Ghia type 14, 01/1966 ->07/1974
All models Coupe.
From chassis no. 146 463 104->

Plasticchrome trim kit for 4-window seals for :
- VW Cox Berline 1200 from 08/1971 to 12/1977- VW Cox Berline 1300 from 08/1971 to 12/1977- VW Cox Berline 1302 from 08/1971 to 12/1977
To install these moldings, you'll need VA131562 clips (not supplied).

Chromed windshield molding kit for Mercedes SL R107
This kit consists of 3 parts:- left pillar moulding- right pillar moulding- upper pillar moulding
Not suitable for SLC C107, use MB33187

Chromed windshield molding kit for Mercedes SLC C107 all models
Kit consisting of 8 parts :- upper molding- lower molding- left molding- right molding- lower left corner moulding- lower right corner moulding- upper left corner moulding- upper right corner moulding
Not suitable for SL R107, use MB33184

This fitting is essential for the proper installation of the two black finish rods of the front windshield and the rear window. It is suitable for :

-> Porsche 911 :
- 911 3.0 SC Coupé, Targa and Cabriolet from 1980 to 1983
- 911 Carrera 3.2 Coupe, Targa and Cabriolet from 1984 to 1989

-> Porsche 930 :
- 930 Turbo 3.3 Coupe, Targa and Cabriolet from 1980 to 1989

The black finish will be standard in 1980 on the 911. But it was already present in the catalog of options from 1974. For Porsche who have the silver finish aluminum molding, it will require the key / fitting RS12528

Sold individually
2 keys / fittings are required by windshield or rear window
Only 1 is needed for the rear window of the Targa versions

Anodized lower left quarter molding for Porsche 911 type F and G from 1968 to 1977:
- Porsche 911 type F :
- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- Porsche 911 type G :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 Turbo 3.0 from 1975 to 1977
Fits only 911 Coupes with opening rear quarter windows.

Black lower left quarter molding for Porsche 911 type G from 1974 to 1977 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 Turbo 3.0 from 1975 to 1977
Fits only 911 Coupes with opening rear quarter windows.

Deluxe aluminium windscreenmoulding kit.

For VW Beetle Cabriolet 1300, 1500, 1302
Years: 08/1964 ->07/1972
Chassis no. 155 000 001 ->152 3200 000.

Anodized lower right quarter molding for Porsche 911 type F and G from 1968 to 1977:
- Porsche 911 type F :
- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- Porsche 911 type G :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 Turbo 3.0 from 1975 to 1977
Fits only 911 Coupes with opening rear quarter windows.