Body trim and hubcap kit

Adhesive plastic chrome trim with 7 mm wide flat profile. Ideal for protecting and embellishing doors, bumpers, windows and the interior of your car.

Sold by rolls of 8 meters

Adhesive plastic chrome trim with 3.5 mm wide flat profile. Ideal for protecting and embellishing doors, bumpers, windows and the interior of your car.
Sold by rolls of 4 meters

Adhesive plastic chrome molding with 20 mm wide flat profile. Ideal for protecting and embellishing doors, bumpers, windows and the interior of your car.
Sold by rolls of 5 meters

Polished aluminum body trim kit for BMW 02 series E10 from 03/1966 to 07/1976:

- All Sedan and Cabriolet models

CAUTION: Not suitable for the Touring version!

The kit includes 10 elements:
- front left wing molding
- front right wing molding
- front bonnet bottom molding
- front left door molding
- front right door molding
- right side molding under rear quarter panel
- left side molding under rear quarter panel
- left rear wing molding
- right rear wing molding
- rear trunk base molding

Supplied with 4 connection cups.

These body tower protection strips will bring the final and original touch to your E10 during a bodywork restoration. Quality and finish guaranteed!

Faced with the flexibility of the aluminum materials used for this beautiful remanufacturing, we recommend the greatest precaution during installation.

Metal and plastic fixing clips not supplied.

Set of 7 polished aluminum body trim strips, chrome look, for VOLKSWAGEN Beetle Sedan and Convertible 1303 without VW hood badge.
Thin version: 9 mm wide
Strips can be mounted :
On Cox Sedan 1303 :- From 08/1972 to 07/1975 and from chassis no. 133 2000 001.
On Cox Cabriolet 1303 :- From 08/1972 to 12/1979 and from chassis no. 153 2000 001 upwards.
Kit composition :NEZ 1 = 935 mmAVG 1 = 715 mmAVD 1 = 715 mmPOR 1 = 920 mmPOR 2 = 920 mmARG 1 = 835 mmARD 1 = 835 mm

Set of 7 fine body moldings in polished chrome-look aluminum. Top quality.

For VW Beetle (except 1302)
- Model 1200, 08/1967 ->07/1973
chassis: N° 118 000 001 ->113 3200 000.
- Models 1300 / 1500 08/1967 ->07/1972
chassis: N° 118 000 001 ->112 3200 000.

Set of 7 body trim strips in polished chrome-look aluminum, for Volkswagen Beetle Sedan 1200, 1300 and Mexico, without VW logo.
Includes 6 side moldings: front and rear fenders, plus hood molding
Thin version : 10 mm wide
Side moldings can be mounted :
- On Cox 1200s from 08/1973 and chassis no. 114 2000 001 up to the end of production in 1978.
- On Cox 1300 from 08/1972 and chassis no. 112 2000 001 up to the end of production in 1973.
- On Cox Mexico all productions
Not suitable for Cox 1303

13mm long metal fastener with nut for upper body strips,

For saloon:
- 1600 & 1600 ti
- 1602
- 1802
- 2002, 2002 ti & 2002 tii
- 2002 Turbo

For Touring:
- 1602
- 1802
- 2000
- 2000 tii
- 2002 - 2002tii

For convertible:
- 1600
- 2002

Clip for holding chrome strips to inside and outside window washer seals.
110 required per vehicle
Sold individually.

For VW Beetle Convertible
Years: 1950 ->07/1964
Chassis : up to ->6 502 399.

Body trim clips are small components used to fasten decorative trim or moldings to the body of a vehicle. They play an essential role in the assembly of certain external parts of the vehicle.
Clips are used to hold body trim or moldings in place, which can be installed on doors, rocker panels or bumpers.They securely hold these decorative elements in place, while ensuring that they don't come loose due to vibration, light impact or weather conditions.Staples are often designed to be easily dismantled and replaced if necessary, facilitating maintenance and repairs.They also help to protect the bodywork beneath the mouldings, reducing the risk of scratches or direct impact on the paintwork.In short, body trim clips secure decorative elements and protect the bodywork, while facilitating maintenance and repair.
This metal clip was originally used to secure body trim for VW Combi Bay Window from 08/1967 to 07/1979.60 clips are required to install a Deluxe trim kit.Replacing damaged or deteriorating clips will keep the body mouldings in place on the vehicle and prevent deterioration.Sold individually.

30mm long metal fastener with nut for upper body strips,

For saloon:
- 1600 & 1600 ti
- 1602
- 1802
- 2002, 2002 ti & 2002 tii
- 2002 Turbo

For Touring:
- 1602
- 1802
- 2000
- 2000 tii
- 2002 - 2002tii

For convertible:
- 1600
- 2002

Complete set of 8 chrome-plated strips for interior and exterior window wiper seals.

For VW Beetle Convertible
Years: 1950 ->07/1964
Chassis : up to ->6 502 399.

Set of 8 original type mouldings for around the body and rocker panels, stainless steel version for front wings without direction indicators.

For Type 3, 08/1969 ->07/1973
All Notch/Fast/Squareback versions (variant)
from chassis No. 310 2000 001->

Set of 7 wide stainless steel body mouldings
German-made quality.

For VWCoccinelle
10/1962 ->07/1966
Chassis N° :
5 010 448 ->116 1021 300.

Kit composition :
NEZ 1 = 999 mm
AVG 1 = 590 mm
AVD 1 = 590 mm
POR 2 = 924 mm
ARG 1 = 835 mm
ARD 1 = 835 mm

Black trim type M TECHNIC 2 for Bmw 3 Series :
- Compatible only with Bmw 3 Series E30 Coupé from 09/1987 to 05/1993.

Black trim type M TECHNIC 2 for Bmw 3 Series:
- Compatible only with Bmw 3 Series E30 4-door sedan from 09/1987 to 5/1993.

Set of 7 polished stainless steel body trim strips for Volkswagen Beetle Sedan for the 1967 model year (from 08/1966 to 07/1967).
This set has a narrower width than the 1963 to 1966 versions.It includes the 6 side moldings: front and rear fenders, as well as the hood molding for versions without Wolfsburg logo.
Slim version: 9 mm wide
High-quality stainless steel
Strips can be fitted :
- On Cox models from 08/1966 and chassis no. 117 000 001- On Cox models up to 07/1967 and chassis no. 117 999 000
Kit composition :
NEZ 1 = 1000 mmAVG 1 = 595 mmAVD 1 = 595 mmPOR 1 = 920 mmPOR 2 = 920 mmARG 1 = 830 mmARD 1 = 830 mm

Connection cup for polished aluminum exterior body trim moldings for BMW 02 E10 series from 03/1966 to 11/1975:

- All Berline, Cabriolet and Cabriolet Baur Targa models (including 2002Turbo)

ATTENTION: Not suitable for 1502 or Touring!

This cup connects the front hood trim to the rear trunk trim.

Quantity required per vehicle: 4

This product is sold individually.

Front bumperkit for Bmw 3 Series:
- Compatible only with M-type bumper for Bmw 3 Series E36 Sedan, Touring, Compact, Coupé and Cabriolet.
Warning! Not suitable with original Bmw M-type bumper.

Set of 14 fine top and bottom fendermouldings for Citroën DS PALLAS from 1965.
This set of moldings is of improved design, which follows the shapes very well and has rounded, neat ends. Used on DS PALLAS between 1965 and 1975.
Compatible models:DS 19 Sedans and Cabriolets (1911cc)1965DS 19/20 Sedans (1985cc) - (1966-1975)DSuper/DSpécial (1985cc) - (1972-1975)DS 21 Sedans and Cabriolets (2175cc) - (1966-1969)DS 23 Sedans (2347cc) - (1973-1975)