Drive shaft support

MEYLE drive shaft support with ball bearing for BMW series 3 E46 :

- 330 d M57 and M57N (Sedan and Touring)

- 330 Cd M57N (Coupé and Cabriolet)

Inner diameter: 35 mm

This cardan shaft suspension is suitable for models with manual and automatic gearbox.

For E34 Saloon and Touring:
- 518 i, 520 i
- 524 td
- 525 i/ix M20/M50
- 525 td/tds
- 530 i M30/M60
- 535 i
- M5 3.6 and 3.8

For E39:
- 523 i and 528 i with automatic gearbox

FEBIdriveshaft centering bush for BMW 7 Series E32 :

Bmw 7 Series E32 :

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)
- 740i 8cyl 286hp from 09/1991 to 03/1994 (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 (engine code m60b40)

This bushing is pressed into the rear part of the gearbox output flange at flector level and allows correct alignment of thelongitudinal shaft (the rod at the end of the transmission shaft is inserted into this centering bushing).

Without it, the shaft will not be correctly aligned and will cause strong vibrations in the chassis.

WARNING: Not suitable for Bmw 7 Series E32 750i v12 engine code m70.

Driveshaft support and bearing for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 06/1979 to 05/1982 automatic gearbox (engine code m30)
- 628 csi 184hp from 06/1979 to 05/1987 manual gearbox (engine code m30)
- 630 cs 185hp from 10/1975 to 08/1979 (engine code m30)
- 630 csi 174hp from 06/1976 to 09/1977 (engine code m30)
- 633 csi 200hp from 10/1975 to 12/1981 (m30 engine code)
- 635 csi 218hp from 12/1977 to 04/1989 manual gearbox (engine code m30)
- 635 csi 218cv from 12/1977 to 05/1982 automatic gearbox (engine code m30)
- M635 csi 286hp from 10/1983 to 02/1989 (engine code s38)
- M6 260hp from 07/1986 to 09/1988 (engine code s38)

Please note! There are 2 different assemblies depending on gearbox type.

FEBI Driveshaft Mount and Bearing for Bmw 6 Series :

Bmw E63 :

- 645ci 8 cyl 333hp from 05/2002 to 08/2005 (engine code n62b44a)
- 650i 8 cyl 367hp from 02/2005 to 07/2007 (engine code n62n48b)
- 650i 8 cyl 367hp from 04/2006 to 07/2010 (engine code n62b48b)
- 635d 6 cyl 286hp from 05/2006 to 07/2010 (engine code m57n2)

Bmw E64 :

- 645ci 8 cyl 333hp from 09/2002 to 08/2005 (engine code n62b44a)
- 650i 8 cyl 367hp from 02/2005 to 07/2007 (engine code n62b48b)
- 650i 8 cyl 367hp from 04/2006 to 07/2010 (engine code n62b48b)
- 635d 6 cyl 286hp from 04/2006 to 07/2010 (engine code m57n2)

This quality transmission support will offer greater durability and will replace the original part.

Febi drives haftbracket for Bmw 3 Series:
- Compatible with Bmw 3 Series E46 Sedan, Touring, Compact, Coupé and Cabriolet versions from 02/1998 to 04/2005 only with the following models:
- 316 i 1.9 105hp (M43 engine) manual gearbox from 04/99- 316 i 1.8 115hp (engine N42) automatic gearbox from 05/01- 318 i 2.0 143hp (N42 engine) manual & automatic gearbox from 06/01- 320 d M47N manual gearbox from 09/02- 320 d M47 & M47N automatic gearbox- 320 i 2.0 150hp manual & automatic gearboxes- 320 i 2.2 170hp manual & automatic gearboxes- 323 i 2.5 170hp manual & automatic gearboxes- 325 i 2.5 192hp manual & automatic except Xi (4 x 4)- 328 i 2.8 193hp manual & automatic transmission- 330 i 3.0 231hp manual & automatic except Xi (4 x 4)

For E21 :
- All models

For E12 :
- For all models
(Please note that there are 2 assemblies, so check your original part number before ordering)

For E28 with manual gearbox only :
- 525 i M30
- 528 i M30
- M5 S38

Central driveshaft bearing for Bmw 7 Series:

- Compatible with all Bmw 7 Series E23 versions from 10/1976 to 06/1986 including 745i engine code m30.

Suitable for manual and automatic gearboxes.

For Roadster with automatic gearbox :
- 2.2 i M54
- 3.0 i M54

For Coupé with automatic gearbox :
- 3.0 i M54

Intermediate driveshaft support with Topran bearing for BMW 3 series E30 since 09/1987 :
- 316 M10- 316i M40- 318i M40- 318is M42- 320i M20- 324d / td M21- 325i M20- M3 S14
This driveshaft suspension is suitable for models with manual and automatic gearboxes.

Intermediate driveshaft support with Topran bearing for BMW 7 series E32:
Bmw 7 Series E32:
- 730i 6cyl 197hp from 07/1986 to 04/1994 manual and automatic gearbox (engine code m30b30)- 730iL 6cyl 197hp from 12/1987 to 03/1994 manual and automatic gearbox (engine code m30b30)- 730i 8cyl 218hp from 05/1991 to 04/1994 manual and automatic gearbox (engine code m60b30)- 730iL 8cyl 218hp from 06/1992 to 03/1994 manual and automatic gearbox (engine code m60b30)- 735i 6cyl 220hp from 10/1985 to 02/1990 automatic gearbox (engine code m30b35)- 735iL 6cyl 220hp from 06/1987 to 02/1990 automatic gearbox (engine code m30b35)- 735i 6cyl 220hp from 10/1985 to 07/1992 manual gearbox (engine code m30b35)- 735iL 6cyl 220hp from 06/1987 to 07/1992 manual gearbox (engine code m30b35)
Not suitable for Bmw 7 Series E32 740i and 750i engine code m60b40 and m70.

Intermediate drive shaft bearing,

For E60 & E61:
- 520 i M54 (E60 only)
- 523 i N52
- 525 d M57N (only with automatic transmission from 12/06->)
- 525 i M54
- 525 xi N52
- 530 i M54 (E60 only)
- 530 i N52
- 530 xd M57N2 (only with automatic transmission from 03/06->)
- 530 xi N52
- 540 i N62N (E60 only with automatic transmission from 03/06->)

For E60 LCI & E61 LCI:
- 523 i N52N & N53
- 525 d M57N2 with automatic transmission
- 525 i N52N & N53
- 525 xd M57N2 with automatic transmission
- 525 xi N53
- 530 i N52N & N53
- 530 xd M57N2 with automatic transmission
- 530 xi N52N & N53
- 540 i N62N (E60 with automatic transmission only)

Palier d'arbre de transmission avec roulement pour Mercedes W124 et Classe E

Pour les modèles listés ci-dessous:

Mercedes W124 berline et break (phase 1 et 2) :
- 200 102/109cv (124 020)
- 200 E 122ch (124.021)
- 200 TE 118cv (124.081)
- 200 E 136ch (124.019)
- 220 E 150ch (124.022)
- 230 E 136ch (124.023) Jusqu'au 10/92
- 250 D 90ch (124.127) Jusqu'au 07/93
- 250 D 94ch (124.125) Jusqu'au 07/93
- 260 E 160ch (124.026) Jusqu'au 10/92
- 400 E 279ch (124.034) Jusqu'au 10/92

Mercedes Classe E W124 berline et break (phase 3):
- E 200 136ch (124.019) A partir de 10/92
- E 200 D 75ch (124.120) A partir de 07/93
- E 220 150ch (124.022) A partir de 10/92
- E 250 D 113ch (124.126) A partir de 07/93

Mercedes W124 et Classe E Coupé et Cabriolet :
- 200 CE Coupé 118ch (124.041)
- 200 CE Coupé 136ch (124.040)
- 200 CE Cabriolet 136ch (124.060)
- 220 CE 150ch (124.042)
- 230 CE 136ch (124.043)

Diamètre intérieur : 25 mm
Qualité origine

Driveshaft bearing support with its bearing,
for Mercedes C Class Type W202 Saloon:
- C 200 Kompressor 180/192hp (202 025)
- C 230 Kompressor 193hp (202 024)
- C 240 170hp (202 026)
- C 280 197hp (202 029)
- C 200 CDI 102/125hp (202 134)
- C 220 CDI 102/125hp (202 133)
- C 250 Turbo D 150hp (202 128)

For Mercedes C Class Type S202 Estate:
- C 200 Kompressor 163hp (202 087)
- C 200 Kompressor 192hp (202 082)
- C 230 Kompressor 193hp (202 085)
- C 240 170hp (202 086, 202 088)
- C 280 197hp (202 089)
- C 200 CDI 102/125hp (202 194)
- C 220 CDI 102/125hp (202 193)
- C 250 Turbo D 150hp (202 188)

Propeller shaft support and bearing for Bmw 6 Series:

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Bmw E64 :

- 630i 6 cyl 258hp from 03/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Intermediate transmission bracket with bearing,

For Saloon:
- 1502
- 1600
- 1600 ti
- 1602
- 1802
- 2002, 2002 ti, 2002 tii
- 2002 Turbo

For Touring:
- 1602
- 1802
- 2000, 2000 tii
- 2002, 2002 tii

For Convertible:
- 1600
- 2002

For Coupé:
- 1600 GT

FEBI Driveshaft Mount and Bearing for Bmw 6 Series:

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Bmw E64 :

- 630i 6 cyl 258hp from 03/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

This high quality transmission support offers greater durability and is an ideal replacement for the original part.

For E36 Compact from 03/94 ->08/00:
- 316 i (1.6) manual gearbox
- 316 i (1.9) manual gearbox
- 318 ti

For E36 Touring from 01/95 ->10/99:
- 318 i
- 318 Tds
- 320 i

MEYLE OE driveshaft bearings and brackets for BMW 7 Series E32 :

Bmw 7 Series E32 :

- 740i 8cyl 286hp from 09/1991 to 03/1994 automatic gearbox (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 automatic gearbox (engine code m60b40)
- 750i 12cyl 300hp from 07/1987 to 03/1994 automatic gearbox (engine code m70)
- 750iL 12cyl 300hp 11/1986 to 03/1994 automatic transmission (engine code m70)
- 750iLS 12cyl 300hp from 09/1988 to 03/1994 automatic gearbox (engine code m70)

WARNING: Not suitable for 6-cylinder versions and 730i v8 engine code m60b30.

FEBI driveshaft support and bearing for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 05/1982 to 05/1987 automatic gearbox (engine code m30)
- 635 csi 218hp from 05/1982 to 04/1989 automatic gearbox (engine code m30)