TOOLATELIER brake and clutch bleeder

This TOOLATELIER auto bleeder for hydraulic systems is ideal for quick and easy replacement of used brake orclutch fluid without the help of a third party.

This brake fluid bleeder consists of a reservoir that holds the new fluid, a hose with a cap that fits over the brake fluid reservoir (master cylinder), and a hose that connects to the spare wheel valve. All you have to do is position yourself at the bleed screws on the caliper or wheel cylinders, which are opposite the master cylinder, then move progressively closer to the latter (bleed screw furthest from the master cylinder to the nearest). The fluid is changed and the air bubbles disappear = better braking = greater SAFETY for you and your loved ones.

This practical system makes it easy to replace old fluid with new, under pressure.

Several adapters are supplied with the tool for vehicles equipped with variable-cap brake fluid reservoirs.

Contents :

- 1 bottle max. 1.4 bar to prevent leaks!
- 3 hoses 3.5 x 303 mm, 5.4 x 303 mm, 5.4 x 183 mm
- 25 mm cap and seal for Lockheed systems
- 27 mm cap and seal for VAG systems
- 44/45 mm cap and 2 seals for Girling and all ATE systems
- 46 mm cap and gasket for Girling systems To avoid leaks, do not exceed 1.4 bar cylinder pressure.

PDF instructions below.