The NEOCLEAN Engine Cleaner (500 ml) effortlessly cleans your engine and mechanical parts. Brake dust, dirt, and grease do not resist its action.
Safe for seals, electrical wires, and rubber components.
Instructions for use:
- Take care to protect electrical components to avoid moisture-related issues during restart.
- Spray on a cold engine.
- Let act for a few minutes to allow better product penetration.
- Rinse thoroughly with clean water then let dry.
Observe the usual precautions.
BELGOM Engine Degreaser (500 ml ) thoroughly cleans and degreases engine compartments as well as other mechanical parts such as axles, suspensions, etc. Its acid-free formula is highly effective in removing dirt from the smallest nooks and crannies of the engine or spare parts. It's also safe for rubber, seals and electrical wires. Product benefits:
- Simple and practical to use - Cleans and removes grease, oil and dust quickly with a brush - Effective on all mechanical parts - Non-detergent to rubber, gaskets and electrical sheathing - Product washes off quickly after rinsing
Instructions for use:
- Protect electrical parts (battery, relay box) - Spray product on dirty parts to be cleaned - Rinse thoroughly with cold water (do not use high-pressure jet) - Wipe delicate parts with a microfiber cloth.
One bottle is usually enough to clean even a heavily soiled motor.
AUTOGLYM Engine Compartment Cleaner (1L ) is a spray containing apowerful, non-corrosive and biodegradable product. Water-based and solvent-free, it is safe for plastics, rubber, paint and metals.
It's an easy-to-use, multi-purpose cleaner that quickly dissolves dirt, grease, oil and liquids.
It is highly recommended for cleaning the engine compartment. However, it can also be used on anodized wheels. Instructions for use :
Before starting, make sure the motor is cold. Next, protect vulnerable items (battery, relay box, electrical cable, etc.) with plastic film or waterproof tape. Apply to a small area to ensure that the product does not damage plated metals, and avoid application to highly polished alloy finishes.
- Spray on and use a brush to loosen dirt. - Spray to remove residues, dust and dirt (do not use a high-pressure spray) - If necessary, wipe with a clean cloth or microfiber. Do not allow product to dry.
Be careful not to flood air inlets, sensitive electrical components or use pressure washing.
After cleaning, spray damp surfaces with AUTOGLYM spray for vinyl and rubber (ref. UC04130) and allow to dry.
