Spring

4 EIBACH front and rear short springs for BMW 02 E10 series :

- 1500
- 1600 and 1600 Ti
- 1602
- 1802
- 2002
- 2002 Ti and Tii

The great EIBACH know-how on your E10 is to offer you a contained roll for a more precise response to the wheel, a unique handling and driving experience.
Firmer, these springs offer a more sporty and more efficient behavior on beautiful asphalt.

A lowering of the E10 also brings out the aggressiveness of its legendary lines.
This EIBACH Pro-kit gives a trim reduction of 25 to 30 mm.

EIBACH reference: E2001-140A

Spring with pink/Fuchsia mark for VOLKSWAGEN Transporter T4 including syncro from chassis no. 70-N-051913.
Initially designed for T4s with a high load capacity, this spring is firmer than the other models. It's an alternative if you want to firm up your suspension following a motorhome conversion, or if you regularly carry a lot of passengers or heavy loads, so it can be considered reinforced if you have a spring with another color mark.
In the case of an assembly where the marker is not the same color, the height of the vehicle may not be correct, so there's an incompatibility, and unfortunately we can't know this until the assembly has been tested, as the chassis number doesn't give this information.

For all E21 315 to 323i models

Spring with white marking for VOLKSWAGEN Transporter T4

Golf 2 8S and G60 (type 19E)
Average lowering: -35 mm

Suitable for Golf 1 cabriolet models 86 ->93 withKarmann kit (large bumpers + rocker panels)
Front lowering: -30 to -40 mm
Rear lowering : -30 to -35 mm

4 lowering springs: -45 mm
Front & rear. German quality.

For Transporter T25/T3, 05/1979 ->07/1992
All models except Syncro version (4 x 4).

Left and right short springs for VW Cox 1302 and 1303 from 08/1970 to 01/1980.Lowering: approx. - 60 mm.
Spring color may vary according to availability. Top quality.

Golf 2 16S and TD
Average lowering: - 30 mm

Front suspension spring, MEYLE Original quality,
for Golf 1 Saloon and Cabriolet from 1979->,
from chassis 1793669623-> or 15A0800001->

Rear suspension shock absorber spring
original type, standard hardness.

For Transporter T3/T25, 05/1979 ->07/1992
All models except Syncro (4 x 4).

Front suspension shock absorber spring
original type, standard hardness.

For Transporter T3/T25, 05/1979 ->07/1992
All models except Syncro (4 x 4).

TA Technixshort spring kit -45mm for Mercedes 200 and 230 W124
This front and rear spring kit allows you to lower your car by up to -45mm. This lowering may vary according to the condition of your shock absorbers.
Suitable for 4-cylinder petrol and diesel cars, sedans and coupes.
Not suitable for model with pilot-controlled shock absorber with variable height.
Assignments :- Mercedes 200 124.020 01/1985 to 08/1989 4 cylinders 2.0L 109hp (M 102.922) Sedan phase 1- Mercedes 200 124.020 09/1989 to 06/1990 4 cylinders 2.0L 109hp (M 102.922) Sedan phase 2- Mercedes 200 D 124.120 01/1985 to 08/1989 4 cylinders 2.0L 72hp (OM 601.912) Sedan phase 1- Mercedes 200 D 124.120 09/1989 to 07/1993 4 cylinders 2.0L 72hp (OM 601.912) Sedan phase 2- Mercedes 200 E 124.021 07/1985 to 08/1989 4-cylinder 2.0L 122hp (M 102.963) Phase 1 sedan- Mercedes 200 E 124.021 09/1989 to 09/1992 4-cylinder 2.0L 122hp (M 102.963) Sedan phase 2- Mercedes 200 E 124.021 10/1992 to 07/1993 4 cylinders 2.0L 122hp (M 102.963) Sedan phase 2- Mercedes 200 CE-16 124.040 06/1990 to 12/1992 4-cylinder 2.0L 136hp (M 111.940) Coupé phase 2- Mercedes 200 CE 124.040 09/1992 to 07/1993 4-cylinder 2.0L 136hp (M 111.940) Coupé phase 2- Mercedes E 200 124.019 07/1993 to 08/1995 4-cylinder 2.0L 136hp (M 111.940) Saloon phase 3- Mercedes 230 E 124.023 01/1985 to 08/1989 4 cylinders 2.3L 136hp (M 102.982) Sedan phase 1- Mercedes 230 E 124.023 09/1989 to 10/1992 4 cylinders 2.3L 136hp (M 102.982) Sedan phase 2- Mercedes 230 CE 124.043 04/1987 to 08/1989 4 cylinders 2.3L 136hp (M 102.982) Coupé phase 1 - Mercedes 230 CE 124.043 09/1989 to 09/1992 4 cylinders 2.3L 136hp (M 102.982) Coupé phase 2

Rearshock absorberspring for Bmw z4 :
Bmw z4 E85 Roadster :
- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)- 2.2i 170hp phase 1 from 12/2002 to 11/2005 (engine code M54B22)- 2.5i 192hp phase 1 from 04/2002 to 11/2005 (engine code M54B25)- 2.5i 177hp phase 2 from 10/2004 to 07/2008 (engine code N52B25)- 2.5si 218hp phase 2 from 10/2004 to 08/2008 (engine code N52B25)- 3.0i 231hp phase 1 from 04/2002 to 11/2005 (engine code M54B30)- 3.0si 265hp phase 2 from 10/2004 to 07/2008 (engine code N52B30)
Bmw z4 E86 Coupé :
- 3.0si 265hp from 10/2005 to 08/2008 (engine code N52B30)

1 front suspension spring sold individually.

Rear coil spring for VOLKSWAGEN Transporter T5:
3 stripes: grey

Spring with grey marking for VOLKSWAGEN Transporter T4 from 1991 to 2003 with lowered suspension and chassis:
- All engines.

Rear coil spring for VOLKSWAGEN Transporter T5:
2 stripes: yellow

Rear coil spring for VOLKSWAGEN Transporter T5 with load index OYM (1137-1181kg):
1 stripe: pink
This spring can be used to reinforcev the suspension since it is the hardest calibration of the range.

Front suspension spring to replace an original spring with 2 pink and 1 green line for Volkswagen Golf 4 and Bora up to chassis number ->1J-Y-720000, front-wheel drive or 4Motion with suspension codes 1JA and 1JD :

- 1.4 75hp (AHW, APE, AKQ)
- 1.6 100hp (AEH, AKL, APF)
- 1.6 105hp (ATN)
- 1.8 125hp (AGN)
- 1.8 Turbo 150hp (AGU, ARZ)
- 1.9 SDi 68hp (AGP, AQM)
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (ATD)
- 1.9 TDi 110hp (AHF)
- 1.9 TDi 115hp (AJM)
- 2.0 115hp (APK, AQY)
- 2.3 150hp (AGZ)

To avoid any imbalance or difference in height, it is imperative to change the 2 sides at the same time.

This product is sold individually.