Lowering spring cups

Only on threaded damper rods for:
- E30
- E28
- E34 (except version with16 mm damper rod)

(Not suitable for 4-wheel drive)

Suitable for :
- E30 including ix (except M3)
- E28 (except M5)
- E24 since 06/82 -> (except M6)
- E34 (except ix and M5)
Only for vehicles equipped with threaded combination or air-ride kit

Enables the front end of the vehicle to be lowered by 15 to 20 mm
These bearings are fitted with sealed ball bearings on both sides, ensuring good lubrication and low wear
Diameter remains identical to original model, only height changes

Suitable for :
- E36 including Compact
- E46 including Compact
- E39
- Z3 (E36)
Only for vehicles with threaded combination or air-ride kit

Enables the front end of the vehicle to be lowered by approximately 15 to 20 mm.
These bearings are fitted with sealed ball bearings on both sides, ensuring good lubrication and low wear.
The diameter remains identical to the original model, only the height changes.

Suitable for all E36 models including Compact
For 6-cylinder engines from 06/92 -> only

Suitable for all Z3 (E36)

For E46 :
- All models including Compact

For E39 :
- All models

Only on vehicles equipped with threaded combination units

Motorsport-type adjustable front suspension bearings to fine tune camber adjustment.
Only for vehicles equipped with coilover shocks,

For E60 & E61:
- All models

For E60 LCI & E61 LCI:
- All models

Enables the front of the vehicle to be lowered by about 15 to 20 mm.
These bearings are equipped with ball bearings that are watertight on both sides, thus allowing for good lubrication and minimum wear.
The diameter is identical to the original model, only their height has changed

Only for vehicles equipped with coilover shocks or air-ride kit,

For E60 & E61:
- All models

For E60 LCI & E61 LCI:
- All models

Lowering cup for Volkswagen GOLF (09/1979-09/1995) - 15 mm
This lowering cup for Volkswagen GOLF (09/1979-09/1995) - 15 mm is a quality remanufacture.
Having disappeared from the market, MECATECHNIC has re-launched production of these 110 mm diameter cups, whichlower the front end of Golf 1, Golf 2, Golf 3 and Corrado by 15 mm. Placed on the front springs in place of the original cups, their shape makes up for the visual height difference between the front and rear fenders.
Compatible models:GOLF 1 :- Golf 1 Sedan 79 ->84 (from chassis N° 179 3669 623->)- Golf 1 Cabriolet all models 79 ->93- Golf 1 Caddy all models 83 ->92- Jetta 1 all models 79 ->84- Scirocco all models 79 ->92 (from chassis N° 53A 000 001->)
(Installation on Golf & Scirocco 74 ->79 is possible with recent bearings and springs from models since 79-> "A" chassis).
GOLF 2 :- Golf 2 all models including Syncro (4 x 4) 84 ->92- Golf Rallye- Jetta 2 all models 84 ->92
GOLF 3 :- All models Golf 3 & Vento (09/1991-09/1994) with wheels with 4 mounting holes up to chassis N°->1H-SW-062 538 or N°->1H-SB-019 475 including Automatic & Syncro (4 x 4) versions.
CORRADO (09/1988-09/1995) : up to chassis N°->50-S-000 051 :- 1.8 16S 136hp (KR)- 1.8 G60 160hp (PG)- 2.0 8S 115hp (2E)- 2.0 16S 136hp (9A)
Sold individually, left or right side

This pair of lowering cups for Volkswagen GOLF (09/1979-09/1995) - 15 mm is a quality remanufacture.
Having disappeared from the market, MECATECHNIC has re-launched production of these 110 mm diameter cups, which allow thefront end of GOLF and CORRADO models to be lowered by 15 mm. Placed on the front springs in place of the original cups, their shape makes up for the visual height difference between the front and rear fenders.
Compatible models:GOLF 1 :- Golf 1 Sedan 79 ->84 (from chassis N° 179 3669 623->)- Golf 1 Cabriolet all models 79 ->93- Golf 1 Caddy all models 83 ->92- Jetta 1 all models 79 ->84- Scirocco all models 79 ->92 (from chassis N° 53A 000 001->)
(Installation on Golf & Scirocco 74 ->79 is possible with recent bearings and springs from models since 79-> "A" chassis).
GOLF 2 :- Golf 2 all models including Syncro (4 x 4) 84 ->92- Golf Rallye- Jetta 2 all models 84 ->92
GOLF 3 :- All models Golf 3 & Vento (09/1991-09/1994) with wheels with 4 mounting holes up to chassis N°->1H-SW-062 538 or N°->1H-SB-019 475 including Automatic & Syncro (4 x 4) versions.
CORRADO (09/1988-09/1995) : up to chassis N°->50-S-000 051 :- 1.8 16S 136hp (KR)- 1.8 G60 160hp (PG)- 2.0 8S 115hp (2E)- 2.0 16S 136hp (9A)