Spring and damper kit

Suitable for :
- A3 (8L) except 1.6L and Quattro
- Seat Leon (1M) except 1.6L and 4MOTION

Suspension kit :
- 4 Shock absorbers
- 4 Short springs: -40 / -40 mm

Kit consisting of 4 Sport shock absorbers with 4 short springs,

For VW Golf 4 Sedan :
- All models except 4MOTION

Rod diameters: 12.5mm and 22mm

Complete front + rear kit SSP PRODUCT :
- 4 short shock absorbers with fixed adapted hardness threaded at the front
- 4 short rear springs + 2 rear threaded mounts
Lets you adjustthe drop between -40mm and -70 mm.
Very good value for money!

For Transporter T6
All Petrol models & Diesel, including 4-Motion version (4 x 4)

Complete front + rear kit SSP PRODUCT :
- 4 short shock absorbers with fixed adapted hardness threaded at the front
- 4 short rear springs + 2 rear threaded mounts 
Lets you adjustthe drop between -40mm and -70 mm.
Very good value for money!

ForTransporter T5 & T6, Multivan, Caravelle, (7H/7J), 04/2003->
All Petrol models & Diesel, including 4-Motion version (4 x 4)

For Golf 2, all engines
(Not suitable for Syncro, Country or Rallye versions)

Front/rear lowering: -40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

BLUELINE threaded combination suspension kit for Volkswagen Transporter T5
For VW Transporter T5, Multivan, Caravelle from 04/2003 onwardsCompatible with all petrol & diesel models, including 4-Motion (4x4) version with PR codes (strut mounting in hub carrier) :- 1BA, 2MF, 2MK- 1BB, 1BJ, 2MG, 2ML- 2MDNot compatible with vehicles with PR codes (strut mounting brackets) :- 1BH, 1BQ, 2MQ, 2MR, 2MT, 2MU
Warning: there are two different mountings, so be sure to compare your mounting before ordering. Your front shock absorber must fit into your hub and not be fixed with 2 screws (see PR codes).
Complete front and rearsuspension kit from MECATECHNIC :- 4 short shock absorbers with fixed hardness, threaded at the front- 4 short springs + 2 threaded rear cupsÂAllows adjustable lowering from -45mm to -70mm.Maximum axle load: Front axle 1710 Kg - Rear axle 1720 Kg
These suspension kits feature a high level of transverse force absorption and shock absorption for road and track roughness.This intelligent high-tech system preserves your vehicle's comfort, improves roadholding and adjusts its height with a wide range of settings to suit all tastes.This threaded kit is also a high-performance system; it's a set of high-tech parts essential to your vehicle, featuring top-quality materials and adjustment possibilities.Great value for money!

Complete front and rear suspension kit from MECATECHNIC:
- 4 short shock absorbers with suitable fixed hardness (threaded at the front)
- 4 lowering springs + 2 rear threaded mounts
Allows you to adjust the lowering from -45 mm to -70 mm.
Maximum axle load: Front axle 1710 Kg - Rear axle 1720 Kg

These suspension kits majorly absorb the transverse force and the shocks caused by bumps on the road or the track.
This smart high-tech device enables you to keep your vehicle feeling comfortable, improve its handling and adjust its height with a wide range of settings to suit all tastes.
This coilover kit is also a very powerful system, being a set of high-tech parts essential to your vehicle made from top quality materials with multiple adjustment options.
Very good value for money!

For VOLKSWAGEN Transporter T6
Compatible with all petrol & diesel models, including 4-Motion (4x4) with PR codes (strut mounting on hub holder):
- 1BA, 2MF, 2MK
- 1BB, 1BJ, 2MG, 2ML
- 2MD
Not compatible with vehicles with PR codes (strut mounts):
- 1BH, 1BQ, 2MQ, 2MR, 2MT, 2MU

Warning: there are two different assemblies, so make sure you compare your assembly before ordering; your front shock must fit in your hub and not be fixed with 2 screws (see PR codes).

For VW Golf 3 Sedan, Cabriolet and Vento,
from 09/94 ->12/97

(Not for TD, TDi, VR6, Estate and Syncro)

Front/rear lowering: - 40mm

Includes :
- 2 front shock absorbers
- 2 rear shock absorbers (with lower spring plates)
- 4 short springs  90mm spring cups
Supplied without screws and bolts

Suitable for:
- A3 (8L)
- Seat Leon (1M)

Suspension kit:
- 4 shock absorbers
- 4 short springs: -50/-40 mm

Suitable for Golf 4 / Bora Sedan only
- All models except 1.4

For Golf 2, all engines
(Not suitable for Syncro, Country or Rallye versions)

Front lowering: -60mm
Rear lowering: -40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

Suitable for Golf 4 4MOTION:
- 1.9 TDi
- 2.3 V5
- 2.8 V6

Suspension kit:
- 4 shock absorbers
- 4 short springs: -30/30mm

For BMW E39 Sedan :
- Petrol: all models (except versions with EDC pilot-controlled suspension and level control)
- Diesel: 520d and 525 td/tds only

Suspension kit :
- 4 Shock absorbers
- 4 Short springs: -35 /35 mm

WARNING: Not suitable for Alpina versions, nor for versions equipped with level control and/or EDC pilot-operated suspension (the front bearings are different and do not allow shock absorbers to be fitted)!

Complete front + rear kit & MECATECHNIC selection :
- 4 short shock absorberswithfixed adapted hardness
- 2 shortrear springs + 2 threadedlowering mounts
Let you adjust the drop between -20 mm and -60 mm.
Very good valuefor money! (TÜV approved)
The front is lowered by adjusting the torsionbars.

For Transporter T4, Multivan, Caravelle, 09/1990 ->04/2003
All Petrol models & Diesel, including Syncro version (4 x 4).
Max. load: Front 1600 kg/Rear 1490 kg

Complete front + rear kit SSP PRODUCT :
- 4 short shock absorberswithfixed adapted hardness
- 2 shortrear springs + 2 threadedlowering mounts
Let you adjust the drop between -40 mm and -70 mm.
Very good valuefor money! (TÜV approved)
The front is lowered by adjusting the torsionbars.

For Transporter T4, Multivan, Caravelle, 09/1990 ->04/2003
All Petrol models & Diesel, including Syncro version (4 x 4).
Max. load: Front 1600 kg/Rear 1490 kg

MTS Technik short spring kit front and rear lowering -30/-30mm for Audi A3 8P Sportback 5-door (8PA) phase 1 and phase 2 with standard chassis :

- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code AXX)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BPY)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code BWA)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CAWB)
- 2.0 TFSI 200hp from 09/2004 to 10/2012 (engine code CCZA)
- 2.0 TDI 140hp phase 1 from 09/2004 to 03/2006 (engine code BKD)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BMN)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BKQ)
- 2.0 TDI 170hp phase 1 from 03/2006 to 04/2008 (engine code BUY)
- 2.0 TDI 140hp phase 1 from 04/2005 to 06/2008 (engine code BMM)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CBAB)
- 2.0 TDI 140hp phase 2 from 04/2008 to 10/2012 (engine code CFFB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CBBB)
- 2.0 TDI 170hp phase 2 from 04/2008 to 10/2012 (engine code CFGB)

ATTENTION: Not suitable for Quattro 4-wheel drive versions or for models equipped with level control!

This kit includes :
- 2 front springs for -30mm lowering
- 2 rear springs for -30mm lowering
- TÜV certified

Identical lowering of the front and rear axles increases driving precision and guarantees a sporty look without sacrificing comfort.

Up to -40mm lowering, you can keep your original shock absorbers.

For Golf 4 Cabriolet from 98 ->05/02,
1.6 to 2.0 Petrol

(Not for TDi or GTi)

Front/rear lowering: -40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

For Corrado,
1.8 and 2.0 8s and 16s engines

(Not for VR6)

Front/rear lowering: -40mm

Includes:
- 2 front shock absorbers
- 2 rear shock absorbers
- 4 short springs
Delivered without screws

1 left or right front gas strut, included in the complete lowering spring kit as part number GJ68854/GJ68855. Suitable for Golf 4 and Bora all models except R32 and 4 Motion versions (4x4).

For Golf 4 / Bora Saloon only, 1.4 and 1.6 petrol engines (except 4Motion)

Suspension kit:
- 4 shock absorbers
- 4 short springs: -40 / 40 mm