Valve tool

This TOOLATELIER brand valve lifter is designed to allow replacement of valve springs and valve stem sealing rings on overhead camshaft engines, without removing the cylinder head.

This tool is used on petrol and diesel engines for passenger cars and utility vehicles.

Technical characteristics :

The opening is 35 to 200 mm with a depth of 250 mm.
The tips are in sizes 25 and 30 mm. It is advisable to consult the technical manual of the vehicle before the intervention.

- Milling in the following sizes:
at 45 ° + 90 °:
30-32,5-35-37,5-40-42,5-50-52,5-55-57,5-60 mm
- 13 stem guide in the following sizes:
6-6,5-7-7,5-8-8,5-9-9,5-10-10,5-11-11,5-12
- not suitable for hardened valve seats

In metal case.

- for smaller engines and motorcycles
- 5 interchangeable bearing drivers
- 100 mm C-Clamp
- pressure screws 70 mm, 110 and 120 mm length
- tensioner pieces:
Ø 16 mm, 19 mm, 23 mm, 25 mm, 30 mm
- telescopic magnetic pick
- tweezers Supplied in a hard case

Spring compression tool for removing/refitting valves which can be attached to your bench for better stability.
For VW Type 1 and Type 4 cylinder heads.

This valve lifter is used to compress the valve springs when replacing valve stem seals or springs.

Suitable for most engines with overhead camshafts (SOHC) or 2 overhead camshafts (DOHC).

Valve adaptors are available in sizes 20, 26 and 34 mm.

Sizes:

- 6 double-sided knifes:

Diam. 28 to 35 mm, 45° and 75°
37 to 44 mm, 30° and 75°
37 to 46 mm, 45° and 68°
44 to 52 mm, 30° and 75°
46 to 60 mm, 30° and 45°
52 to 65 mm, 60° and 75°

- 4 adjustable guides for diameters 6.5 to 12.5 mm
- 1 T-handle forcutters

Suitable for cylinder heads with tempered valve seats.