Camshaft EMPI GT3 for Volkswagen engine type 1 - 291 degrees

This EMPI GT2 camshaft for Volkswagen type 1 engines is a reference for type 1 perfo engines from 1600cc displacement upwards.

Machined in a refrigerated foundry to EMPI specifications, GT series camshafts are Parkerized("deep" manganese phosphating) for easy running-in and high hardness.

Valve lift (exhaust and intake): 0.430" => 10.92mm at 1.1:1

Cam lift: 0.391" =>9.93mm

Opening time: 291°.

Supplied with molybdenum mounting grease and quality screws and bolts, all camshaft specifications can be found in the downloadable pdf.

Mount the pulley on its AAC using Loctite threadlocker and tighten to torque (2.5daN). In some cases, it may be necessary to lightly grind the screw heads if they touch the oil pump body during blank assembly.