Rearview mirrors for Volkswagen Golf 5

Heated aspherical mirror

Electric rearview mirror with turn signal and convex glass
Primed, paintable in body color Non-electrically folding version

For Saloon only (not for Estate, Jetta or Plus version)

This right-hand-side wing mirror housing is designed for the Volkswagen Golf 5 and is supplied primed, ready to be painted in the colour of your choice. It is intended for owners wishing to restore their vehicle to its original appearance by replacing a cracked, discoloured or missing upper cover. As a brand-new replacement part, it fits the vehicle’s bodywork perfectly to achieve a result faithful to the original condition. A wise choice for maintaining and preserving a Golf 5 in the best possible condition.

This left outer mirror shell is intended for the Volkswagen Golf 5 and allows you to replace a cracked, scratched or missing cover. Supplied in primer, it requires painting before installation to match the vehicle's colour. As part of the restoration or careful maintenance of a collection Golf 5, this new part guarantees a neat finish and a faithful reproduction of the original appearance. It constitutes a direct replacement adapted to the requirements of enthusiasts keen to keep their vehicle in its best condition.

Rear-view mirror with heated, convex mirror glass and indicator
Primed, to be painted in the same colour as the bodywork Non-electrically retractable version, without Parking light

Rear-view mirror with heated, aspherical mirror glass
Primed, to be painted in the same colour as the bodywork Non-electrically retractable version

Electric wing mirror with indicator and aspherical mirror
With primer, ready to paint the same colour as the car body Not electric folding

Heated convex mirror

Rear-view mirror with heated, convex mirror glass and indicator
Primed, to be painted in the same colour as the bodywork Non-electrically retractable version

Chrome-plated "USA " style rearview mirror arm with screw mounting.
The inclination of the upper part of the arm can be adjusted to the desired angle.

Technical details:
Height: from 40mm to 110mm
Base: 32mm
Mounting screw diameter: 16mm Sold individually

Height: 105 mm
Width between the base and the height: 60 mm
Base diameter: 32 mm
Diameter of mounting screw: 16 mm

Fitted only with UA14985
Sold per unit

EUROPE XL strap-on mirror.
For motorhomes, caravans and trailers.
With articulated arms allowing a good adaptation to all mirrors with a maximum height of 185 mm.
To be fixed on the original mirrors.
Fixed by adjustable rubber bands.
Mirror adjustment independent of the frame.
Dim. Mirror (mm): 140 x 78.
Maximum height: 185 mm.
Sold individually.

Convex glass for improved visibility

Dimensions: 120 mm x 76 mm

Universal mirror with blind spot mirror.
For most mirrors. Adjustable mirror base and head. Oval mirror. Dim:(WxH): 180 x H 125 mm. Extension: 25-45 cm.
Weight 250 g.
Sold individually.
To be fixed on the original mirrors.

This bullet-style mirror with chrome finish embodies the Old School and Nostalgia Racing aesthetic, appreciated by classic vehicle enthusiasts. It suits both the left and right side, offering great versatility during restoration or customisation. The glass is adjustable, allowing precise adjustment according to driver requirements. A refined and characteristic part to restore the period spirit of a classic vehicle.

Right-hand side (passenger)
Black externally-adjustable version

Distance between mounting screws: 45 mm

Pair of adjustable left and right round mirrors in chrome-plated stainless steel.

Technical specifications:
- Head diameter: 110mm
- Base dimension: 60mm x 20mm
- Mounting hole diameter: 8mm
- Single-hole mounting

Supplied complete with gaskets and screws.

These quality British-made mirrors are made entirely of chrome-plated stainless steel (head and base).

Left-hand side (driver's)
Black, externally-adjustable version

Distance between mounting screws: 45 mm

Diameter of the head: 114 mm
Distance between mounting screws: 102 mm
Base: 165 mm x 32 mm (at its widest)
Works on the left and right-hand side
Mounting screw and seal supplied.

Sold per unit

The Black MILENCO SPOT blind spot mirror is added to the original exterior mirror. Practical, it allows you to view the blind spot of the original mirror.Its mirror is adjustable. It is attached to the top of the original mirror, ensuring quick and easy installation. Its aerodynamic shell prevents excessive windage and pressure on the original mirror. Permanent, it is usable on right or left mirror.It installs on the mirrors of cars, vans, motor homes.
Mirror size (mm): 130 x 95.
Color black.
Sold by the piece

Ref Milenco M3100

Can be used on both left and right-hand sides
Diameter of the round head: 114 mm
Fitted on the left or right-hand side

Dimensions of the base: 90 mm x 30 mm

Sold per unit

This left-hand exterior mirror with round shape and chrome finish is intended for replacement of a worn, damaged or missing component on a classic vehicle. Its mounting method via door hinge corresponds to a design typical of vintage automobiles, where the mirror is fitted directly to the door hinge articulation rather than to the panel or window frame. As part of careful restoration, choosing a new chrome-finished component allows you to recover the original appearance and preserve the aesthetic consistency of the vehicle. This mirror thus constitutes a reliable element for restoring a presentation in keeping with period condition.

Left rearview mirror (driver's side)
Luxe Chromed model, externally adjustable.

Fixing screw spacing: 35mm.
Caution, does not fit on original Golf center distance (different).

Glass size: 130 x 78 mm
Base plate: 8 x 3 cm
Total height: 135mm Polished stainless steel
Made in England
Supplied with screws and bolts.

Diameter of the head: 105 mm
Convex glass for improved visibility

Mounted on rail without drilling using 2 Allen screws

Left or right-hand door hinge pin
Originalstandard diameter: 8 mm
Version with threading for door mirror. For Beetleand other older vehicles

Enables a rear-view mirror to be mounted using a door hinge.

This mounting foot adapter is designed to allow the installation of a rectangular-type mirror, from series after July 1967, on a Volkswagen Beetle or Karmann manufactured before that date. Its internal thread pitch corresponds to the large screw present on more recent mirrors of these models, thus replacing the threaded hole that appeared on doors from 1968 onwards. Fixation to the bodywork is carried out by drilling three small holes; the kit includes the base gasket and the three screws necessary for installation. A solution suited to enthusiasts wishing to restore or keep their classic vehicle in working order whilst benefiting from functional equipment.

This right-hand external mirror features a round shape and chrome finish, designed to mount on the door hinge, a characteristic fastening method found on many classic vintage cars. It is suitable for replacing a worn, damaged or missing mirror to restore the vehicle to its original appearance and functionality. Its chrome finish helps preserve the refined aesthetic expected during restoration. A new part that meets the requirements of enthusiasts concerned with the authenticity of their vehicle.

Right-hand model
Diameter of the head: 115 mm
Base: 42 mm x 31 mm (at its widest)
Diameter of mounting hole: 8 mm
A single mounting hole

Diameter of the head: 76 mm
Mounted on rail without drilling using 2 BTR screws

Left-hand model
Diameter of the head: 115 mm
Base: 42 mm x 31 mm (at its widest)
Diameter of mounting hole: 8 mm
A single mounting hole

Recommended for towing caravans or trailers over 2.5 m wide, AERO MILENCO mirrors optimize rear vision. If the driver is always looking at the wheel and roof of his caravan, or when manoeuvring, he needs the GRAND AERO MILENCO mirror.

Right-hand door mirror
Specially designed for assembly on Mini doors (38 mm between the 2 screws) but can be adapted to other vehicles.
Glass diameter: 95 mm
The position of the glass can be adjusted using a screwdriver at the rear of the mirror
Base dimensions: 79 mm x 30 mm

Captive nut in the door for mounting the right-hand door mirror.

Brushed aluminium finish
Head diameter: 97 mm
Screw diameter: 8 mm