Front axle beams

Puma" front axle body with ball joints.Height-adjustable from 0 to -6 cm.Delivered ready-to-fit with bearings and bushings installed, designed for original blades (VJ51704) not included, grease nipples also not included.Mecatechnic recommends the use of caster shims (VJ51604). Not approved for road use.
For VW Beetle & Karmann-Ghia type 14 since 08/1965 and chassis since N° 116 000 001(except 1302 & 1303).Models: 1200, 1300, 1500

New front axle body.
Delivered with bearings

For Beetle

Front axle with short "Puma" ball joints + short torsion blades:- height-adjustable from 0 to -6 cm- shortened by 2 inches (5.08 cm)- not approved for road useShims and long screws required (VJ51604).
For VW Beetle and Karmann-Ghia type 14 since 08/1965 all models 1200, 1300, 1500 from chassis No. 116 000 001 except 1302 & 1303.

2 Complete sets of 9 torsion bars for upper and lower front suspension tubes.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

For mounting between the chassis nose and the front suspension lower tube (all models except 1302 & 1303).

Original front axle mounting screws
Need 4 pieces, sold in pairs.

For Beetle 1200, 1300, 1500
(all years, all models except 1302, 1303)
Karmann-Ghia

M8 x 1,25

Bearing on the upper or lower tube of the front axle body. Original quality.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

M10 x 1,50

Front axle with short "Puma" pivots + short torsion blades:- height-adjustable from 0 to -6 cm- shortened by 2 inches (5.08 cm)- not road-approvedShims and long screws required (VJ51604).
For VW Beetle and Karmann-Ghia type 14 up to 07/1965 all models up to chassis No. 115 999 000.

M10 x 1,50 45°

Upper or lower tube bearing on front axle with spindles
Diameter: 46 mm
4 required

For Beetle & Karmann-Ghia from 1960 ->07/1965
->all versions chassisno. 2 921 552 ->115 999 000.

Upper or lower tube bushing
on front axle with spindles and Puma.
External diameter: 45.5 mm
Internal diameter: 37 mm
Width: 24 mm
4 required, sold per unit.

For Beetle & Karmann-Ghia
all versions ->07/1965
Chassis no. ->115 999 000.

Front axle side reinforcement parts with ball joints. Often attacked on the sides of the suspension arms, rebuild your original front axle with this set of plates.

For VW Beetle

Long front axle fixing screw
Designed for mounting with wheel chocks.
Dimensions: M12 x 1.5 x 102 mm.
Sold in pairs

For VW Beetle 1200, 1300, 1500

For Old Beetle & Karmann since 08/65->
(all models except 1302 & 1303)

It is necessary 2 per vehicle (1 per tube)
Think of blocks & long screws reference VJ51604

Sway-a-way for front axle with spindles
For Beetle & Karmann up to ->07/65

Note, 2 are required per car (1 per tube)
Remember the castor shims & long screws part reference VJ51604

1 adjuster screw to lower afront axle with spindles (Puma type)
Designed to modify 1 front axle tube, to be cut and welded to the desired height, fine adjustment usingmultiple notched teeth.
Note: 2 are required per car (1 per tube)
Remember the castor shims &long screws part reference VJ51604.

For Beetle & Karmann-Ghia Type 14 up to ->07/1965
all versions up to chassis no. ->115999 000.

1 adjuster screw to lower a front axle with ball joints (Puma type)
Designed to modify 1 front axle tube, to be cut and welded to the desired height, fine adjustmentusing multiple notched teeth.
Note: 2 are required per car (1 pertube)
Remember the castor shims & long screws part reference VJ51604.

For Beetle & Karmann-Ghia Type 14, from 08/1965->
all versions 1200, 1300, 1500 from chassis no. 116 000 001->
except 1302 & 1303.

1 adjuster screwto lower a front axle with spindles or ball joints
High-quality German manufacturing by CSP.
Designed to modify 1 front axle tube, to be cut and welded to the desired height, fine adjustment using multiple notchedteeth.
Note: 2 are required per car (1 per tube)
Remember the castorshims & long screws part reference VJ51604.

For Beetle & Karmann-Ghia all years
(all versions except 1302 & 1303)