Suspension arm

For Audi A4 B6 Sedan type 8E2 and Avant type 8E5 :
- All models with suspension codes 1BA, 1BE and 1BR

This complete kit for rebuilding the front suspension includes :

- 1 rear lower left main suspension arm with ball joint
- 1 lower right main suspension arm with ball joint
- 1 lower front left suspension arm with ball joint
- 1 front right lower control arm with ball joint
- 4 upper suspension arms
- 2 stabilizer links
- 2 steering knuckles

INFORMATION: All necessary mounting hardware included.

MEYLE HD range reinforced front suspension arm kit for BMW 5 series E39 :

- All models except 535i, 540i and M5

Kit composition :
- 2 MEYLE HD upper suspension arms
- 2 MEYLE ORIGINAL lower suspension arms
- 2 MEYLE HD stabilizer bar links
- Screws

These high quality suspension arms provide optimized function compared to the original, design flaws are corrected for better life and better use efficiency.

Wishbone with ball joint for Porsche 911 type 996 :

-> For the front and rear axle :
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005

-> For the rear axle only :
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005

Origin version not adjustable

Not suitable for the Porsche 996 GT3 RS

Suitable for right and left sides

Lower rear suspension arm with ball joint for Porsche Boxster 987 from 2006 according to the chassis number :

- 987 2.7 Boxster fase 1 - 240 cv (M96.25) de 2005 a 2006
-> Up to chassis 98-6U703 033
- 987 3.2 Boxster S fase 1 - 280 cv (M96.26) de 2005 a 2006
-> Up to chassis 98-6U722 298

Suitable for right and left sides.

Sold individually

Lower rear suspension arm with ball joint for Porsche Cayman S 987 :

- 987 3.4 Cayman S phase 1 - 295 hp (M97.21) of 2006
-> Up to chassis 98-6U774 551

Suitable for right and left sides.

Sold individually

Wishbone with ball joint for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Non-adjustable version

Suitable for front or rear and right or left

Quantity per car : 4

Sold individually

Repair kit for 4 horizontal front axles (2 sides). Original German quality.
For VW :- Beetle from 1947 to 07/1965 up to chassis N° 115 999 000.- Karmann-Ghia T14 from 08/1955 to 07/1965 up to chassis N° 145 999 000.

Full kit enables front axle rebuild

For Saloon type 8EC:
- All models

For Estate type 8ED:
- 1.6 102hp (ALZ)
- 1.8T 163hp (BFB) including Quattro
- 1.9 TDi 116hp (BKE, BRB)
- 2.0 130hp (ALT)
- 2.0 TDi 140hp (BPW) including Quattro
- 2.0 TFSi200hp (BWE) including Quattro
- 2.5 TDi 163hp (BDG)
- 2.7 TDi 180hp (BPP)
- 3.0 218hp (BBJ) including Quattro
- 3.0 TDi 204hp Quattro (BKN)
- 3.0 TDi 233hp Quattro (ASB)
- 3.2 FSi 255hp (AUK) including Quattro

Sealing rings on suspension arms
for ball joint front axle. Original quality:
- 2 small upper
- 2 large lower

for :
- Beetle

Front swingarm for Porsche 911 type 997 GT2 and GT3:

- 997 3.6 GT2 - 530 hp (M97.70S) from 2008 to 2009
- 997 3.6 GT2 RS - 620 hp (M97.70) from 2011
- 997 3.6 GT3 - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 - 435 hp (M97.77) from 2010 to 2011
- 997 3.6 GT3 RS - 415 hp (M97.76) from 2007 to 2009
- 997 3.8 GT3 RS - 450 hp (M97.77R) from 2010 to 2011
- 997 4.0 GT3 RS - 500 hp (M97.74) from 2012

Suitable for left and right sides

Sold individually

Front control arm link for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Suitable for right and left sides

Sold individually

This control arm is mounted on the front axle and rear axle of all Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Suitable for the right or left side

4 control arms per vehicle

Sold per unit

New rear left suspension arm with rubber.

For VW Transporter T25 / T3
Years : 05/1979 ->07/1992
All models included Syncro version (4 x 4) with 15" wheels.

Right-hand suspension arm, metal sheet version
supplied complete with ball joint and silentblocs
Superior quality.

for Beetle 1303 all versions from 08/73->
from chassis no. 134 2000 001-> (Cabriolet 154->)

Repair kit for two front axle vertical spindles (2 sides).

For:
- Beetle, 1947 ->07/1965
up to chassis no. ->115 999 000.
- Karmann-Ghia T14, 08/1955 ->07/1965
up to chassis no. ->145 999 000.

Centre mounting needle screw for front axle with spindles or ball joints blades onupper or lower suspension arms.
6 required per vehicle, sold per unit.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Lock nut on centre mounting needle screw for blades on front axle with spindles or ball and upper and lower suspension arms. 6 required per vehicle, sold per unit.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

This brake locknut for securing the suspension stops - M12x1.25 is metric.

It is recommended for reliable securing of suspension stops.

This rear suspension arm travel stop for 2CV is screw-in. The screw-in rear suspension arm stop is made of rubber and is compatible with 2CV sedans and vans from 1970 fitted with drilled stop brackets.
20mm M8x1.25 thread, nut not supplied.

This Citroën ID rear suspension arm stop is designed to absorb shocks and limit travel, guaranteeing comfort, stability and long suspension life.
Compatible with all models.