Clutch disc

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Clutch disc diameter 180mmFor VW Cox engines 1200 and 1300For VW Combi Split engine 1200

For Beetle engines 1200 and 1300
For Combi Split engine 1200

Reinforced with metal particles
for moderately prepared engines.
Undampened rigid centre: sharper engagement and improved resistance to sudden acceleration.

Daikin Exedy High performance reinforced clutch disk, 200 mm.

This disk uses high quality semi-metallic woven friction materials with a high resistance to slipping. More durable than the original disk, it can be coupled to a standard or a stage 1 or 2 clutch mechanism for a perfect installation.
With a 200 mm diameter, it is recommended for stock car use or a moderately tuned engine.
Rigid centre not damped: drier interlocking and improved resistance to hard acceleration.

For VW Beetle and Combi equipped with a Type 1 engine: 1600, 1641, 1776, 1835, 1915, etc.

This clutch plate for Alpine A110 (11/1964-12/1976) - 180mm is a quality reproduction

This clutch plate for Alpine A110 Berlinette is 180mm in diameter. It fits 20-spline output shafts for engine types:
6881, 8041, 812, 8121, 697-04, 807-241 and 810-30/101

Compatible with models
- Berlinette A110 1100 V100 - type 1100 VB (11/1964-10/1967)
- A110 GT4 Coupé - Type 1100 L VA (10/1963-1969)
- Berlinette A110 1300 S - type 1300 VB (10/1967-09/1970)
- A110 GT4 Coupé - Type 1300 LVA (01/1968-1970)
- Berlinette A110 1300 G - type 1300 VA (01/01967-06/1971)
- Berlinette A110 1500 - type 1500 VA (03/1967-09/1968)
- Berlinette A110 V85/1300 - type 1300 VC (10/1969-12/1976)

For Audi 100 up to chassis no. ->4A-M-100000, 6-cylinder engine AAH

Single clutch disc with diameter of 215 mm for VOLKSWAGEN Transporter T25/T3 all 1.6 and 1.7. Diesel and Turbo-Diesel engines

This 18-spline clutch disc for 2cv after 1982 is compatible with 2cv models and derivatives with 435 and 602cc engines.

It is suitable for the latest generation of diaphragm mechanism and stop.
It has fitting splines of 36 mm in length.

This 18-spline clutch disc for 2cv from 1966 to 1982 is compatible with 2cv and derivatives with 435 and 602cc engines.

It is suitable for the 3-finger mechanism and the intermediate stop.
It has fitting splines of 27 mm in length.

For Golf 1:
- 1.6 GTi 110hp (EG) from 79 ->82

Replacement disc only.

For VOLKSWAGEN Golf 3:
- 1.8 90hp Petrol (ABS, ADZ), Syncro version only

For VOLKSWAGEN Passat 3 from 1992 to 1997
from chassis 31-N-000 001-> up to chassis ->3A-V-300 000:
- 1.6 100hp Petrol (AEK, AFT)
- 1.8 75hp Petrol (AAM)
- 1.8 90hp Petrol (ABS, ADZ)
- 1.6 80hp Turbo-diesel (SB)

Disque d'embrayage type origine diamètre 200 mm pour VW Combi Split Brésilien de 1957 à 1975.

This 18-spline clutch disc for 2cv Van from 1972 to 1978 is compatible with 2cv models and derivatives with 435 and 602cc engines.

It is suitable for the 3-finger mechanism and the intermediate stop.
It has fitting splines of 27 mm in length.

This 18-spline clutch disc for DYANE and Acadiane after 1982 is compatible with DYANE and Acadiane models with a 602cc engine.

It is suitable for the latest generation of diaphragm mechanism and stop.
It has fitting splines of 36 mm in length.

This 18-spline clutch disc for DYANE from 1968 to 1982 is compatible with DYANE and Acadiane models with 435 and 602cc engines.

It is suitable for the 3-finger mechanism and the intermediate stop.
It has fitting splines of 27 mm in length.

This 18-spline clutch disc for Mehari after 1982 is adapted to the diaphragm mechanisms and the latest generation release bearing.
It has fitting splines of 36 mm in length.

This 18-spline clutch disc for Mehari up to 1982 is adapted to the 3-finger mechanisms and release bearing.
It has fitting splines of 27 mm in length.

This 18 spline clutch disc for AMI 6 and AMI 8 cars from 1966 to 1979 is compatible with AMI 6 and AMI 8 cars with M4 and M28 engines.

It is suitable for 3-finger clutch mechanisms and the intermediate bearing.
It has 27mm long splines.

This clutch plate for Renault 4 (10/1972-12/1993) - Cléon is a quality reproduction

This clutch plate for R4 with Cléon engine is 180mm diameter. It mounts on the 20 spline output shafts for
Cleon Type 813-12, 688-10, 688-11, 688- D7, 688-712 , 689, 842, C1C and C1E engines.

Compatible models:
- R4 GTL type R1128 : 01/1978 to 12/1993
- R4 Savane type R112C : 09/1986 to 12/1993

- R4 Raised Van type R2108 : 10/1972 to 07/1975
- R4 Extended Van F6 type R2370 : 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370: 07/1978 to 11/1985
- R4 Long glass van R2430: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990