Clutch transmitter and receiver

The brake bleed screw cap is a small accessory found at the end of the bleed screw on brake systems. Its main purpose is to protect the bleed screw from dirt, moisture and oxidation. In addition to this protection, it helps maintain brake system pressure and prevent brake fluid leakage during servicing.This protective rubberplug is suitable for bleed screws on wheel cylinders, brake calipers and clutch actuators.

Top quality FEBI clutch master cylinder for BMW series 3 E30 :

- All models from 316i to M3

Bore diameter = 19.05mm

For E28 :- All models

FEBIclutch transmitter for BMW 6 series:

Bmw E24 :

- 628 csi 184hp from 05/1982 to 05/1987 (engine code m30)
- 635 csi 218hp from 05/1982 to 04/1989 (engine code m30)
- M635csi 286hp from 05/1982 to 02/1989 (engine code s38)
- M6 260hp from 07/1986 to 09/1988 (engine code s38)

Hydraulic clutch slave cylinder on the gearbox.

Compatible with Seat Ibiza type 6K:
- 1.9 Diesel 64hp (AEY)
- 1.9 TDi 90hp (1Z, AHU)
- 1.9 TDi 110hp (AFN)

Fluid clutch slave cylinder

For VW Transporter T4type 70,
Multivan, California, Eurovan
Years: 09/1990 ->02/1997
up to chassis no. ->70-V-116 000.
Engines:
- 1.8 Petrol 66hp (PD)
- 1.9 Diesel 60hp (1X)
- 1.9 Turbo Diesel 68 hp (ABL)
- 2.0 Petrol 84hp (AAC)
- 2.4 Diesel 75 hp (AJA), 78 hp (AAB)
- 2.5 Petrol 110 hp (AAF, ACU, AEN, AEU)
- 2.5 Petrol 115 hp (AET, APL, AVT)

Suitable for :
- Golf 2
- Golf 3
- Passat 3
- Corrado

For Polo Classic / Variant 6V2:
- 1.9 TDi 90hp (AHU, ALE)
- 1.9 TDi 110hp (AFN)

Clutch receiver for FEBI for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 06/1979 to 05/1987 (engine code m30)
- 630 cs 185hp from 10/1975 to 08/1979 (engine code m30)
- 633 csi 200hp from 10/1975 to 12/1981 (engine code m30)
- 635 csi 218hp from 12/1977 to 04/1989 (engine code m30)
- M635csi 286hp from 10/1983 to 02/1989 (engine code s38)
- M6 260hp from 07/1986 to 09/1988 (engine code s38)

Top quality FEBI clutch slave cylinder for BMW:

E21:
- 315 1.6l 75hp from 11/1980 to 12/1983 (engine code M10B16)
- 316 1.6l 90hp from 02/1975 to 09/1980 (engine code M10B16)
- 316 1,8l 90hp from 10/1980 to 09/1983 (engine code M10B18)
- 318 98hp from 03/1975 to 07/1980 (engine code M10B18)
- 318i 105cv from 10/1980 to 12/1983 (engine code M10B18i)
- 320 4 cylinders (320-4) 109hp from 02/1975 to 10/1982 (engine code M10B20)
- 320i 4 cylinders 125cv from 03/1975 to 08/1978 (engine code M10B20i)
- 320-6 122hp from 08/1977 to 12/1982 (engine code M20B20)
- 323i 143cv from 07/1977 to 10/1982 (engine code M20B23)

E30:
- All models from 316i to M3

E12:
- All models

E28:
- All models (except 524d)

For Transporter T25 all engines (gasoline & Diesel)

Front master cylinder front for fluid clutch control.

For VW Transporter T25/T3/Bus, 05/1979 ->07/1992
All Petrolengines & Diesel
including Syncro version (4 x 4).

Bleeder screw on rear clutch slave cylinder.
Diameter: M6 mm
Length: 28 mm

For VW Transporter T25/T3, 05/1979 ->07/1992
including Syncro version (4 x 4).

Clutch receiver for Bmw 7 Series E32:

Bmw 7 Series E32 :

- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)

Clutch master cylinder for:

- MX5 NC NCFL 1.8 and 2.0l

Clutch hose for Mercedes Pagode

For Mercedes SL W113 Pagode:
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This clutch hose is located on the hydraulic control circuit between the clutch sender and receiver. A damaged or porous clutch hose will make it difficult to operate the clutch pedal and may cause hydraulic fluid leaks.

Hydraulic clutch receiver,
for Mercedes 280 SL R107:

- Mercedes 280 SL (107.042) all engine types from 09/1974 to 08/1985


The clutch receiver is located at the pedal and actuates the hydraulic clutch control. A faulty sender can cause fluid leakage and gear shifting difficulties.

This SASIC clutch receiver for Peugeot 504 (02/1971-07/1986)-M10 is true to original.
This SASIC clutch receiver for Peugeot 504 has an M10 connection and is compatible with most models, sedans, estate cars, coupes or convertibles from serial number 1974191 to 3650192.
It has also equipped the 505, 604 and even the 4x4 P4 and UMM.

JP GROUP hydraulic clutch emitter for Volkswagen Golf 5
For VW Golf 5 : - All 5- and 6-speed gearbox models

Hydraulic clutch slave cylinder on the gearbox.

Compatible with Seat Leon type 1M if the gearbox is controlled by linkage