Cardan dust

Universal CV boot. It has 2 different diameters and can be adapted to homokinetic gaskets with a diameter between 90 and 120 mm.

The boot comes with:
- 2 clamps
- 1 tube of grease for the boot.

Universal CV boot for cars. Boot for constant velocity joints between 60 and 100 mm.

The boot comes with:
- 2 clamps
- 1 tube of grease for the boot.

It comes in 2 diameters for constant velocity joints from 70 to 135 mm.

This bellows provides a perfect fit and an absolute seal on all types of single, double or grooveless seals.

Kit contents:
- Bellows
- 1 bag MoS2 grease (70gr)
-2 universal clamps

There are 3 sizes for constant-velocity joints, between 55to 105 mm.
This gaiter offers perfect hold and absolute sealing on all types ofsingleor double or groove-free seals.

Contents of set:
-1 gaiter
- 1 sachet of MoS2 grease (70 g)
- 2 universal tightening clamps

There are 3 sizes for constant-velocity joints, between55 to 105 mm.
This gaiter offers perfect hold and absolute sealingon all types ofsingle or double or groove-free seals.

Contents of set:
- 1 gaiter
- 1 sachet of MoS2 grease (70 g)
- 2 universal tightening clamps

Cardan gusset - diameter 55 mm

This dust bellows for drive shaft is accompanied by :

- 2 bags of 80g of grease forhomokinetic joint
- 1 clamp
- 1 circlip 27 mm inside diameter
- 1conical washer 31 mm inside diameter

Dimension size :

- Inside diameter base / joint side : 55 mm
- Inner diameter on the shaft side: 24mm
- Height : 80 mm


Ideal for renovating your drive shafts, check the dimensions of your old bellows first to ensure compatibility.

Right side gearbox output flange shaft for VOLKSWAGEN Transporter T4 from 1999 to 2003.

Suitable for:
- 5-speed manual gearbox (EEZ, DQR)

This split sleeve makes installation easy, as it does not require removing the trumpet.
This trumpet bellows comes complete with screws and 2 original clamps for a perfect seal. You can replace them with Serflex universal clamps if you wish.
Left- or right-hand mounting.
Sold individually, in German quality.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

This split sleeve makes installation easy, as it does not require removing the trumpet.
This trumpet bellows comes complete with screws and 2 original clamps for a perfect seal. Remember to order the UO10441 clamp. You can replace them with Serflex universal clamps if you wish.
Left- or right-hand mounting.
Sold individually, in German quality.

For models with trumpet rear axle:
- VW Beetle 1200, 1300, 1500 (not 1302 / 1303), Karmann-Ghia, Type 3, Combi Split, Porsche 356

Not suitable for models with universal joints.

Boot kit with slit for rear-axle cross-tube for all Porsche 356 :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Also suitable for Carrera versions

The slotted system allows the boot to be replaced without removing the rear-axle cross-tube.

Think of the clamp for universal boot reference UO10441

Contains fasteners.

Quantity required per car : 2

Sold individually

Kit for 1 interior or exterior rearside:
1 dust cover + montage tools + grease
Diameter 100 mm high quality.

For:
- Kombi Bay Window all models 06/67->79
- 181 with cardan from 1974->

Kit for 1 interior or exterior rearside:
1 dust cover + montage tools + grease
Diameter 100 mm high quality.

For:
- Transporter T25 all models 05/79 ->07/92
including model Syncro (4 x 4) with wheels 14" inches

Right side gearbox output flange shaft for VOLKSWAGEN Transporter T4 from 1996 to 2003.

Suitable for:
- 5-speed manual gearbox (AFK, AFL, DXZ, DYA, FJS, FTV)
- 4-speed automatic gearbox (CWC, CWD, CWE, CWF, CWG, CWH, DLM, DML, DNA, DNB, DNC, DND, DNE, DNF, DXS, EQB, EQD, EQE, EQF, EQG, EQH)

Complete seal kit for trumpet rear axle.Made from German quality components, this sealing kit allows you to overhaul side cover gaskets, trumpet bellows and bearing housings at the same time.You'll be back on the road with a like-new rear axle!CSP quality
This kit includes :- 6 side cover gaskets 0.2 mm- 2 side cover gaskets 0.1 mm- 2 rear axle O-rings- 2 original trumpet bellows (unopened)- 4 quality clamps (2 large + 2 small)- 2 oil seals- 2 hardened steel shims- 2 primary shaft O-rings- 2 seals for bearing covers- 2 pins
- For VW Beetle, Karmann Ghia and Type 3

Complete right or left cardan shaft. Sold individually.Nut diameter: 90 mm.
For VW :- Beetle 1302, 1303 and Automatic- Karmann-Ghia- Type 3- Buggy, 356 Replica with type 1 cardan gearbox.

Complete kit for 1 inner or outer side:
1 Universal joint yoke + 1 bellows + mounting hardware
Diameter 100 mm. Superior quality.

For:
- Combi Bay Window all models 06/67->79

Complete kit for 1 inner or outer side:
1 Universal joint yoke + 1 bellows + mounting hardware
Diameter 100 mm. Superior quality.

For:
- Transporter T25 all models 05/79 ->07/92
+ Syncro model (4 x 4) with 14-inch wheels
for the 4 sides at the rear + the 2 inner sides at the front.
+ Syncro model (4 x 4)with 16-inch wheels
for the 2 inner sides at the front only.
Except for Automatic gearbox version.

Suitable for:
- Audi 80 from 81 ->87
- Audi Coupé from 81 ->88

To Golf 1 Cabriolet :
- 1.8 carburetor 08/87->
- 1.8 GLi 08/84->

To Golf 2 :
- 1.8 carburetor 08/89->
- 1.8 GTi 8s, 16s & G60

To Corrado :
- 1.8 et 2.0 16s 136cv (KR, 9A), left side
- 1.8 G60 160cv (PG) châssis 50-K-006 794->

VW original left or right rear driveshaft, sold individually
Suitable for VW Combi Bay Window T2b from 08/1970 to 07/1979 from chassis no. 211 2000 001.

Complete kit for1 inner or outer side:
Cardan shaft Bellows requiredMounting
Diameter 100 mm.

For :
- Combi Bay Window all models 06/67->79