Engine flywheel

Original type flywheelSprocket: 130 teethDiameter: 200 mmDrilling: 4 pinsBrand-new reproduction or original reconditioned depending on availability.
For VW Beetle, Type3 and Combi

Original type engine flywheel
Belt: 130-tooth
Diameter: 200 mm
Drilling: 4 pins
New reproduction or original reconditioned depending on availability.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Original type flywheel
Sprocket: 130 teeth
Diameter: 200 mm
Drilling: 8 pins
Lighter version: 5.9 kg
Faster revs without compromising torque.
Ideal for prepared engines Type 1: 1600cc

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Original type flywheel
Sprocket: 130 teeth
Diameter: 200 mm
Drilling: 8 pins
Lighter version: 5.9 kg
Faster revs without compromising torque.
Ideal for prepared engines Type 1: 1600cc

For VW Beetle, Type 3

New engine flywheel, original type.

For VW Transporter T25/T3, 01/1981 ->07/1992
Engines:
- 1600 Diesel 50hp (CS) 01/1981 ->07/1987
- 1600 Turbo-Diesel 70hp (JX) 08/1984 ->07/1992
including Syncro version (4 x 4).

Engine flywheel mountingbolt on crankshaft
Dimensions : M10 x 1 x 19,5
6 parts required, soldper unit.

Pour VW Transporter T25 / T3 :
- 1600 Diesel 50hp(CS) 01/1981 ->07/1987
- 1600 Turbo-Diesel 70hp (JX) 08/1984 ->07/1992
- 1700 Diesel 57hp (KY) 08/1984 ->07/1992

Needle roller bearing fixed in the engine flywheel
that guides the gearbox shaft.
Outer diameter: 21.20 mm
Lenght: 15.40 mm

For Beetle & Karmann-Ghia : 1200/1300/1500/1600

For Kombi Split & Bay Window :
- typo 1 : 1200/1300/1500/1600
- type 4 1700/1800/2L

For Transporter T25 / T3 :
- engine type 4 2L cooled by air
- engine 1900/2100 cooled by water

Needle bearing for crankshaft guiding the gearbox shaft for VOLKSWAGEN Transporter T25 / T3 from 06/1990 :
- 1.6 TD (JX from engine n°207631)
- 1.7 D (KY from engine n°073819)

Dual-mass engine flywheel screw for Porsche 911 type 997 phase 1 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera from 2005 to 2008
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S from 2007 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera 4S from 2007 to 2008

Dimensions : M10 x 1 x 50 mm

Quantity required per vehicle : 8

Sold individually

Dual-mass engine flywheel screw for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005

Dimensions : M10 x 1 x 50 mm

Quantity required per vehicle : 8

Sold individually

Dual-mass engine flywheel screw for Porsche 987 Boxster phase 1 :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 3.2 Boxster S phase 1 - 280 hp (M96.26) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Boxster S phase 1 - 295 hp (M97.21) from 2007 to 2008
- 987 3.4 Boxster RS 60 Spyder - 303 hp (M97.22) of 2008

Dimensions : M10 x 1 x 50 mm

Quantity required per vehicle : 8

Sold individually

Dual-mass engine flywheel screw for Porsche 987 Cayman phase 1 :

- 987 2.7 Cayman phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Cayman S phase 1 - 295 hp (M97.21) from 2006 to 2008
- 987 3.4 Cayman S Sport - 303 hp (M97.22) of 2008

Dimensions : M10 x 1 x 50 mm

Quantity required per vehicle : 8

Sold individually

Dual-mass engine flywheel screw for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Dimensions : M10 x 1 x 50 mm

Quantity required per vehicle : 8

Sold individually

Besoin de 4 pions entre un vilebrequin et un volant-moteur d'origine,
Vendu à l'unité.
Convient pour VW Combi Split Brésilien de 1957 à 1975.

Need 4 pins between crankshaft and flywheel, 8 on performance parts (8 holes). Sold individually.

Needle bearing at the end of the crankshaft guiding the gearbox shaft, for Transporter T25 /T3 until ->06/1990 :
- 1.6 Diesel (CS)
- 1.6 Turbo Diesel (JX up to engine no. ->207630)
- 1.7 Diesel (KY up to engine no. ->073818)

Socket head mounting screw, multi-pan internal recesses, for mounting the flywheel on the crankshaft, suitable for
Golf 3, Corrado and Passat 3 (35i) 2.8 and 2.9 VR6 (AAA, ABV) engines

Dimensions: M10 x 1 x 19 x 11
10 needed
Sold individually

Steering wheel for VOLKSWAGEN Transporter T25/T3 from 1979 to 1992 for clutch diameter 228mm for all water cooled petrol engines 1.9 and 2.1.

Original flywheel mounting screw Molded foot

Flywheel bearing for
- MX5 NA all models- MX5 NB-NBFL all models