362,90 €
ATINew turbo without part exchange (you cannot return your old part)
Compatible with Seat Leon type 1M:
- 1. 9 TDi 90hp (AGR)...
On order, within 16 days
On order, within 16 days
Delivery mode
Relay Mondial Relay - 48/72h : 9.90€
Relay La Poste - 48/72h : 10.90€
Colissimo - 48/72h : 11.90€
TNT - 24/48h : 13.90€
Chronopost - 24h : 15.90€
Collect at store Wambrechies (France) : Free
Description Product
New turbo without part exchange (you cannot return your old part)
Compatible with Seat Leon type 1M:
- 1.9 TDi 90hp (AGR)
Precautions should be taken when replacing a turbocharger:
- The oil circuit must be cleaned to remove any residue that may clog the circuit
- The oil and oil filter must be changed
- You must check and clean the oil intake and return lines
- The air hoses and breather pipes should also be checked
- With the help of a syringe, feed oil into the turbo via the oil inlet, then start the turbine manually.
- Once the new turbo is installed, start the engine and let it idle for 10 minutes. Before stopping the
engine, let it idle for a few seconds (do not accelerate suddenly before stopping)
No commentary about the product
With Trusted Shops, we can improve directly thanks to your comments posted on the MECATECHNIC website
Vehicle compatibility