Crankshaft bearings

Set of crankshaft bushings in standard dimensions for Golf 1.5 to 1.8 petrol, all models + 2000-8S
For Golf 1, 2, 1.5 and 1.6 Diesel and turbo Diesel engines

Sets of original dimension crankshaft bushes with side stops. GermanKOLBENSCHMIDT / GLYCO quality.

For VW Transporter T25/T3, Multivan,
Bus,Caravelle, Joker, Syncro (4 x 4)
Years: 01/1981 -> 07/1992
Engines:
- 1.6 Diesel 50hp (CS)
- 1.6 Turbo-Diesel 70hp (JX)
- 1.7 Diesel 57hp (KY)

Pin for aligning the crankshaft bearings on the block. 5 required per engine.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Pin for aligning the crankshaft bearings on the block. 5 requiredper engine.

For VW:
- Beetle, Karmann-Ghia, 181, Type 3, Combi
Type 1/2 engines: 1200, 1300, 1500, 1600 cc
- Combi Bay Window, Transporter T3/T25
CT type engine: 1600c
Type 4 engines: 1700, 1800, 2000 cc air-cooled
WBX engines: 1900, 2100 cc water-cooled

Crankshaft bearing for Citroën Traction in 0.50mm rib.
This set of 6 half-bearings includes the original part numbers: 451389/02, 451390/02 and 451391/02.
Originally, Citroën Traction engines were fitted without crankshaft bearings. These appeared on Traction models equipped with the 11D engine. However, they can also be fitted to "Perfo" engines and some 7hp models.
Compatible models:- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B from 02/1939 to 1941, Engine, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1939 à 1941, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

Set of bearings of repair dimension size for 25/30hp moulded base Type 1 engine:
External dimension (crankcase): + 0.50 mm
Internal dimension (crankshaft): + 0.25 mm
Lateral dimension (crankcase): standard 24 mm

For Beetle, Karmann-Ghia & Camper
Years: until ->06/1959
Type 1 engine: 1131cc / 1192cc
Up to engine no.->3 399 999.

Set of oversize bearings:
External dimension (Casing): standard
Internal dimension (Crankshaft): + 0.25 mm
Lateral dimension (Casing): standard

For Beetle, Karmann-Ghia, Type 3& Combi
Type 1 engines: 1200, 1300, 1500, 1600 cc
& Transporter T25 1600 CT petrol engine.

Set of oversize bearings:
External dimensions (Casing): standard
Internal dimension (Crankshaft): + 0.50 mm
Lateral dimension (Casing): standard

For Beetle, Karmann-Ghia, Type 3& Combi
Type 1 engines: 1200, 1300, 1500, 1600 cc
& Transporter T25 1600 CT petrol engine.

Set of oversize bearings:
External dimension (Casing): + 0.50 mm
Internal dimension (Crankshaft): + 0.25 mm
Lateral dimension (Casing): standard

For Beetle, Karmann-Ghia, Type 3& Combi
Type 1 engines: 1200, 1300, 1500, 1600 cc
& Transporter T25 1600 CT petrol engine.

Set of oversize bearings:
External dimension (Casing) + 1 mm
Internal dimension (Crankshaft): + 0.25 mm
Lateral dimension (Casing): + 2 mm

For Beetle, Karmann-Ghia, Type 3& Combi
Type 1 engines: 1200, 1300, 1500, 1600 cc
& Transporter T25 1600 CT petrol engine

For E10 :
- 1502 to 2002, 2002 ti and tii
(Not for Turbo)

For E21 :
- 315, 316
- 318, 318 i
- 320, 320 i (4 cylinders)

For E30 :
- 315, 316
- 316 i, 318 i

For E12 and E28 :
- 518, 518 i
- 520, 520 i (4 cylinders)

Half-bearing for crankshaft bearings No. 1, 2, 4 and 5
For bearing No. 3 order C017038,

For Golf 1:
- 1.1 50hp (FA, GG)
- 1.1 52hp (FJ)
- 1.3 58hp (GS)
- 1.3 60hp (GF)

For Golf 2:
- 1.05 60hp (HZ)
- 1.3 50hp (NU)
- 1.3 55hp (MH, NZ)

Bush on crankshaft bearing N°3, original dimensions 65mm.
Original Volkswagen Classic Parts.

For Beetle + Mexico, Karmann-Ghia, 181, Type 3, Combi
engine : 1200, 1300, 1500, 1600cc (except 25 / 30 hp)

For Transporter T25 / T3, 05/1979 ->12/1982
engines: 1600cc (CT, CZ)

Bush on crankshaft bearing N°4, original dimensions 50mm.
Original Volkswagen Classic Parts.

For Beetle Mexico, 10/1993 ->2004
engine : 1600cc

For Transporter T25 / T3, 08/1982->07/1992
engines:
- 1900cc (DF, DG, DH, EY, GW, SP)
- 2100cc (DJ, MV, SR, SS)

MAHLE crankshaft bearings for Volkswagen Golf 5
For VW Golf 5 :- 1.9 TDI 90hp (BRU, BXF, BXJ)- 1.9 TDI 105hp (BKC, BLS, BXE)- 2.0 SDI 75hp (BDK)- 2.0 TDI 136hp (AZV)- 2.0 TDI 140hp (BMM)- 2.0 TDI 16V 140hp (BKD)- 2.0 TDI 170hp (BMN)
Set of 10 original crankshaft bearing halves. Original MAHLE qualityWithout side stops for bushing no. 3, set of flanges part no. KD40710 to be ordered additionally.

Suitable for:
- 2.5 V6 TDi 150 hp (AFB, AKN)
- 2.5 V6 TDi 155 hp (AYM)
- 2.5 V6 TDi 163 hp (BFC, BCZ, BDG)
- 2.5 V6 TDi 180 hp (AKE, BAU, BDH)

For A4 (B5):
- 2.5 V6 TDi 150hp (AFB, AKN)

For A4 (B6):
- 2.5 V6 TDi 155hp (AYM)
- 2.5 V6 TDi 163 hp (BFC, BCZ, BDG)
- 2.5 V6 TDi 180hp (AKE, BAU, BDH)

MAHLE crankshaft bearings for Volkswagen Golf 4
For VW Golf 4 :- 1.9 TDi 130hp (ASZ)- 1.9 TDi 150hp (ARL)
Set of 10 original crankshaft bearing halves. Original MAHLE qualityWithout side stops for bushing no. 3, set of flanges part no. KD40710 to be ordered additionally.