Gearbox and transmission tool

Tool for mounting cardan bellows auto tools

This TOOLATELIER brand expander, also known as a bellows cone , is very practical for replacing the bellows.
It allows you to slide the bellows over the head of the universal joint.
Grease the cone for easy passage.

Use only for universal rubber bellows.

Quantity supplied :

- 1 cone for cardan bellows

Practical and universal, this TOOLATELIER centering device comes with 9 different bits to fit most modern clutches and clutch plates.
Sliding outer centering cone for all makes of vehicle.

Sizes of 9 adapters: 18 x 11 / 18 x 12 / 18 x 15 / 18 x 17 / 18 x 19 / 18 x 20 / 18 x 21 / 18 x 25 / 82 x 20.5 mm

This tool lets youinstall a cardan shaft or driveshaft bellows without removing it.

No effort, no time wasted without damaging your bellows.

Suitable for all types of cars and vans.

Material: aluminum
Adjustable diameter: 25-115 mm
Working pressure: 5 to 8 bar

Use only with universal rubber bellows!

This TOOLATELIER wrench is used for dismantling and reassembling Haldex-type differential filters.
It has 12 46 mm flats and a handle length of 40 cm.

This type of filter is found, for example, on the Audi TT, Volkswagen 4 Motion, Golf and Passat.

For locking flywheels, gears and clutch pulleys on scooters and motorcycles.

Diameter: 50 to 125 mm

Tool for aligning the electromagnetic ring enabling the crankshaft oil seal to be replaced.

Applications: Volkswagen Crafter (2006-2013) 5 cylinders - 2.5 TDI and Blue Tdi
Engine codes: BJJ / BJK / BJL / BJM / CEBA / CEBB / CECA / CECB

This tool enables the simple removal of homokinetic joints from transmission shafts.

Universal set, can be used on the majority of car models.

This 2 piece kit includes a tool to hold the pinion nut, 12 point, and a fluted socket.

This tool is used for the Land Rover Freelander 2 from 2006.

This tool allows perfect centering of your clutch disc. Ideal for precisely centering the disc in relation to the clutch housing.

Universal use for hub diameters from 15 to 28 mm.

Diameter is infinitely adjustable from 15 to 21 mm / 17 to 25 mm and 22 to 28 mm.

Supplied with 1 centering tool with clamping cone and 2 clamping cones from 15 to 21 and 17 to 25 mm.

Not applicable to double disc

Used to set the gear selector position.

Suitable for the following models:
Ducati Monster
Hypermotard
MH900E
Multistrada,
SportSuperbike,
Supersport,
Diavel

For the following engines: 620, 750, 748, 749, 800, 900, 996, 998, 999, 1000, 1100.

Equivalent to the Ducati tool OEM 88713-1091

Applications: for BMW R1100R / GS / RT / RS et K75 / K100 / K1100 (all models)

This centering device is also suitable for BMW K series with 5-speed gearboxes as well as oil cooled heads.

Applications: for BMW R1200GS / Adventure / RT / ST / R and all engines with oil cooled heads and 6-speed gearbox.

Also suitable for R1100S, R1200C / CL, R1150R / GS / RT / RS, ROCKSTER and K1200RS / GT / LT with 6 speed gears

Clutch locking tool
Application : BSA A7, A10(The late 4 spring clutch) A50 and A65(4 spring clutch) Triumph 500/650/750cc Twins
Manufactured from specially selected steel to obtain the best possible performance
Time saver
Time saver
Part of the classic motor cycle range

Tool for holding the flywheel during loosening and/or tightening of the flywheel nut.

Length: 680 mm
Outside diameter: 175 mm
Inner diameter: 150 mm

Suitable for Ducati models:

- Monster 400 2002-2008 / Monster 620 2002-2006
- Multistrada 620 2006 / Sport 620 2003
- Monster 659 2012-2013 / Monster 695 2007-2008
- Monster 696 2007-2012 / 748 S/R 2002
- 749 S/R 2003-2006 / Monster 750 2002
- Sport 750 2002 / SuperSport 750 2002
- Monster 795 2012-2013 / Monster 796 2011-2013
- Hypermotard 796 2010-2012 / Monster 800 2003-2004
- Sport 800 2003 / SuperSport 800 2003-2007
- 848 2009-2012 / MH Evoluzione 2002
- Monster 900 2002 / Sport 900 2002
- SuperSport 900 2002 / Monster S4 916 2002
- ST4 916 2001-2005 / ST2 944 2002-2003
- ST4S 996 2003-2005 / 996R 2001
- Monster S4R 2004-2006 / 998 /S 2002-2004
- 999 R/S 2002-2007 / GT1000 2007-2010
- Monster S/S2R 1000 2003-2008
- Multistrada DS/S 1000 2003-2006
- Paul Smart 1000 2006 / Sport 1000 2006-2009
- ST3 1000 2005-2007 / SuperSport 1000 2003-2006
- Hypermotard 1100 EVO/S 2008-2010
- Monster 1100 2009-2010 / Multistrada 1100 2007-2010

Sizes:

- M22 x 1,50: For Honda, Suzuki, Yamaha
- M26 x 1.50: Bosch type ignition system

This driveshaft puller is used for mounting the drive shafts in the wheel hub.

It includes 6 different sockets.

- M16 x 1.5 mm: for Subaru
- M20 x 1.5 mm: for VW Beetle, Touareg - Porsche Cayenne
- M22 x 1.5 mm: for BMW E30, E46
- M24 x 1.5 mm: for BMW E36 - Mercedes W203
- M27 x 1.5 mm: for BMW E32, E34, E38, E39, X5
- M30 x 1.5 mm: for BMW E32, E34, E36

This puller is used to remove the drive shaft from the Fiat Ducato from 1994 with a pull type clutch. It is also used for bolts on sliding rails of BMW and Mercedes-Benz engines.

This set includes the puller with an internal thread M8 x 1.25, a traction claw for the drive shaft and a traction bolt M6 x 1.0 (M8 x 1.25) for the sliding rail bolts.

Facilitates parallel insertion of seals on gearbox, camshafts, crankshafts, wheel bearings, etc.

Adjustable jaw: 18.5 to 89mm

Product benefits:

- Robust and durable aluminium construction
- Steel sleeve

This set of mandrels will help you centre the disk when installing a SAC clutch on BMW vehicles.

Centering mandrel, outer diameter 5 x 23.0 mm, screw M8 x 1.25 x length 65 mm
Outer Ø 15 x 26.5 mm, screw M8 x 1.25 x 65 mm
Outer Ø 15 x 28.0 mm, screw M8 x 1.25 x 65 mm
Outer Ø 15 x 32.5 mm, screw M8 x 1.25 x 65 mm
Outer Ø 15 x 34.0 mm, screw M8 x 1.25 x 65 mm
Inner Ø 15 mm, outer Ø 32.5 mm, screw M5 x 0.8 x length 54 mm

This kit enables S.A.C (Self Adjusting Clutch => Automatic Wear Compensation) clutches to be removed and installed.

With 3 or 4 mounting holes.

Maximum center distance: 310 mm

Examples of models:

Audi A3, A4, A6, A8, VW Passat, Golf, Sharan, Tiguan, Ford Mondeo, S-Max, Galaxy, Transit, Mercedes C, E, CLS, S, CLK, SLK, SL, BMW 320, 330, 520, 530.
For Alfa Romeo 147, 159, 166, Fiat Ulysse, Croma, Ducato, Lancia Phedra, Thesis.