TOOLATELIER universal brake caliper plunger - Right-hand pitch

perfect for changing the brake pads on my vw golf 4

compliant and of good quality

Works very well on 2012 Opel Zafira B rear caliper. Ships in 48h. Efficient and inexpensive. Great job.

impec je ne regrette pas mon achat

Nickel and good price.m'en served immediately .livraison limited.commandé dim soir et reçue juste jeudi .travaux prévu du jeudi après midi.tout juste.impec

Indispensable good quality product at a good price and always good delivery times: To be recommended

Excellent quality

indispensable tool for changing rear brake pads

good value for money tools

Product as described. Order placed following purchase of the same tool in a car center with a manufacturing defect rendering it totally unusable.

Fitting rear brake pads on a mustang.

Ras biennnnnnnnnnnnnnnnnnnnnnnnnnnn

Very good, does the job. Good quality.

Fully functional for my Audi A3

Tool suitable for domestic use on current cars. It does what it was invented to do, it's sufficient and does the intended service. A good buy.

Pending use within a week

Megane II .......30 secondes par piston.....JE PENSE QUE TOUT EST DIS

Description confirmed and adapted to 307 sw

I found this product on the Internet and I'm very satisfied.

Item meets my expectations...

I chose it for its price and for an urgent need and of course I recommend it to everyone.

Simple, effective and inexpensive equipment, I recommend it.

Very good product, I recommend it

very good value for money

Product perfectly suited to my needs, impeccably effective

Good quality piston plunger. I recommend, use on Megane 3, fits very well.

it works very well, having said that on my audi a4 as my pads were extremely worn I had difficulty putting the device in place ( when I say worn they were in the iron mdr )otherwise impeccable

Very good and practical product

Fits perfectly on my Peugeot 508

Does what it was designed to do

Meets my expectations...

Yes, I recommend it, it's very practical.

Good quality for a very low price - well done.

Impeccable. Just what I needed.

Small quality key. A must-have for your small garage

For its functionality and price Perfectly meets my expectations for pushing back the pistons on my vehicle's rear brakes.

Good product in appearance, as not yet tested. 2 piston mounting options (2 x 2 lugs) for use on different piston models.

Works perfectly. Used on a BMW F11 with the BMW adapter purchased separately.

practical tool is well suited

good product, meets requirements

Easy to use product meets my expectations

Ok for rear brake piston 308

Very good product, quite strong, but not yet used.

Good product, I recommend it.

Very good value for money

Well not yet tried I think the tool is strong

Perfect for pushing back a brake piston

Object as described in the ad

Quality product, very well finished, very efficient

Hello, The counter plate was missing on delivery (packaging not suitable), but the after-sales service reacted very quickly to my request. Nothing to complain about. Top-notch after-sales service!

Ok on fiat panda III Quality ok

Good value for money for mechanical enthusiasts

Everything great

The ideal tool for small DIY enthusiasts

ALL

Great

Ras

Perfect product.

As presented, attractive price, on-time delivery

very good value for money

product adapted to my needs

Top quality good finish easy to use

it's perfect

Well, it's not a Renault-specific tool in my case, but it gets the job done.

Tool works very well on a vw t4.

Compliant and fast delivery

Fast and accurate delivery.

Great value for money. I didn't need a set where 3/4 of the tools would never be used.

Perfect, compared to pliers and small clamps. Very practical.

Too early to be convinced

Good quality, efficient

Nothing to complain about. Perfectly meets my expectations.

A little disappointed as it says "universal" but doesn't fit a Citroën C5. To be seen on my AUDI.

Not much to say about this device

correct product, fast delivery

Costaud pratique nickel.....

Good, well-made product. CLEAR

Very good for individuals who do it themselves

Plate a little fragile but does the job

i chose it because i needed it the product is well made

perfect for the rear brakes on my C3 II 90 hp eco. to get it to fit between the caliper jaws, I had to remove 2 of the 4 pins that turn the piston. It's perfect. I was able to change the brake pads in just a little less time than for the front brakes.

will soon be useful for repairing the brakes on my vehicle.

Tool meets my expectations and the vehicle

easy-to-use product, necessary to easily push back the brake release piston, I'm very happy with it

Indispensable for pushing back certain brake caliper pistons where it's necessary to turn at the same time. It's best to use a socket to manipulate it, as the lever seems easy to twist.

essential tool, for occasional use, I had a little trouble pushing the pistons back, but without the tool impossible

SUPER PRACTICAL ERGONOMIC

I haven't used the products yet, as I'm just starting to restore the vehicle. Nevertheless, I think that the products offered are of very good quality.

Not quite universal for Clio III rear pistons

Quality product, easy to use. Pistons are easy to retract, so no more hassles. I recommend it to all those who repair their own vehicles.

Effective for rear disc brakes on a Peugeot 407

Not having used the device yet, I can't judge it....

easy to use, very practical

I chose this product for the price. I had to remove 2 of the four ergos to be able to move the screw back as far as possible. No problem, works perfectly.

I haven't tried it yet to evaluate the product.

Good product, effective for pushing back the pistons of the rear calipers on a T5 transporter. The only small drawback is that the pins tend to come out of their housings, but I think a spot of glue or welding will solve this problem...

I chose this product to change the brake pads, its product is a little big only

The rod used to turn the plunger is not solid enough, so the plate has to be filed down, otherwise it's impossible to use it.

Did not match my vehicle

Can't be used if piston is fully extended

missing support bar on bracket

Not suitable for my Honda civic. Washer studs too far apart on one side and too close together on the other.

This product does not fit RENAULT brake calipers ( master3) and it's a shame that the accessory for RENAULT is not available.

Zero nul pas cher mais il ne monte pas sur beaucoup de voiture pourtant décrit dans la fiche du produit! I ended up with a pair of pliers to push back my caliper pistons !!!