RUBSON Frameto Stop-Rust Treatment - bottle - 500ml

Details about : RUBSON Frameto Stop-Rust Treatment - bottle - 500ml

RUBSON Frameto Stop-Rouille 90ml is an immediate rustproofing treatment in the form of a black liquid to be applied to all indoor and outdoor metal surfaces.
Rid mechanical parts and car bodywork (radiators, water pipes, sheet metal rims, body panels, etc.), as well as tools, garden furniture, shutters, gates, steel grilles, etc., of all traces of corrosion.
Fast-acting and lead-free, the product is applied directly to rust with a brush. It forms an ultra-resistant, long-lasting black protective layer.
After 24 hours drying time, the treated surface can be painted with a special metal paint.

Economical, only 75ml of product are needed to treat a 1m² surface of ferrous metal.

This bottle will enable you to transform rust in depth and stop its development on a total surface area of approx. 6.50m² (1 coat).

WARNING: Not suitable for parts subject to high temperatures (exhaust manifolds or lines, brake calipers etc...) nor for prolonged immersion under water!

Instructions for use :
- Clean the surface with a wire brush or by scraping to remove rust and paint scales.
- Clean and degrease surfaces with a solvent (degreaser or F-gasoline).
- Shake bottle vigorously for 2 minutes to homogenize product.
- Pour the required amount into a plastic container.
- Apply with a brush over the rusted area, dabbing and smoothing evenly.
- Never pour unused product back into the bottle.
- After use, clean your hands and brush(es) with soapy water.
- Allow to dry for 24 hours before painting.

Information :
- Once dry, product renders black (does not necessarily require painting).
- Use at temperatures between 10°C and 40°C.
- For maximum protection, treat the surface in 2 coats.
- Before applying metallic, vinyl or latex paints, a cellulose coating is essential.
- Keep frost-free.
- Heat resistance 130°C maximum.
- Lead-free.

Please observe safety precautions.

Original reference:

Rubson Frameto