MEYLE reinforced right or left rear upper suspension bearing for BMW Z3 E36 Roadster and Coupé - standard or M-Technic chassis

Details about : MEYLE reinforced right or left rear upper suspension bearing for BMW Z3 E36 Roadster and Coupé - standard or M-Technic chassis

Reinforced upper rear suspensionbearing , brand MEYLE HD range, right passenger side or left driver side for BMW Z3 E36 with standard chassis or M-Technic chassis:

Roadster :
- 1.8 4cyl 115hp phase 1 from 05/1997 to 09/1998 (engine code M43B18)
- 1.9 16V 4cyl 140hp phase 1 from 05/1997 to 04/1999 (engine code M44B19)
- 1.8 4cyl 1.9L 118hp phase 2 from 04/1999 to 08/2000 (engine code M43B19TU)
- 1.9i 4cyl 118hp phase 2 from 08/2000 to 06/2002 (engine code M43B19TU)
- 2.2i 170hp phase 2 from 12/1999 to 06/2002 (engine code M54B22)
- 2.8 192hp phase 1 from 05/1997 to 08/1998 (engine code M52B28)
- 2.8 192hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231hp phase 2 from 09/1999 to 06/2002 (engine code M54B30)
Coupé :
- 2.8 192hp phase 1 from 05/1997 to 08/1998 (engine code M52B28)
- 2.8 193hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231hp from 09/1999 to 06/2002 (engine code M54B30)

Suitable for 10mm diameter shock absorber rod.
Supplied with gasket.
Spacer washer and nuts not supplied.

This high-quality rear suspension cup offers optimized performance compared with the original version: design faults are corrected, and the materials used provide greater strength, longer life and improved operating efficiency.

WARNING: When replacing your bearings, it is imperative to replace and reinstall the spacer washer located under each one (see photo). Otherwise, the bearing silentblocks will come out of their housings and the shock absorbers will "pass through" the body, which could cause serious damage to your vehicle.

This product is sold individually.

Bottom diameter: 45mm
Height lower part: 23mm

Original reference:

33 52 1 092 362

33 52 1 128 819