Holder

Fir Tree Fixing
Dimensions : Head 36.0mm x Hole Size 9.3mm x Panel Range 2.5 to10.5mm
Replaces Renault OE No. 7703077225
Also replaces Peugeot/Citroën OENo. 7518N8
Also replaces Peugeot/Citroën OE No. 7518N8
Pack 50Pces.

This clip, Genuine Porsche, participates in the fixing of the sideskirt of Porsche 968 :

- 968 3.0 from 1992 to 1995
- 968 3.0 Club Sport from 1993 to 1995
- 968 3.0 Turbo S from 1993 to 1994

Required quantity per underbody on narrow body : 6

Sold individually

Plastic clip for Citroën DS door panel trim.
Attached to the top of the panel on some Citroën DS models, there are 4 clips per panel.
Compatible with all Citroën DS models.

Set of 50 rubber caps for mounting wide body trim strips .
For bodywork holes with 7mm diameter.

Please check if your holes measure 6 or 7mm!

For VW Beetle

This upper trunk seal clip secures the upper trunk seal at the junction with the rear window of your Citroën DS. It guarantees a reliable seal and a good seal, preventing water infiltration into the trunk.
This clip holds the rubber to the top edge of the trunk lid, where it rests on the rear window.
Compatible with all models.

This small stainless steel clip allows the assembly and maintenance of the window washer seal. The old steel clip, corrode with time and contaminate the elements healthy of bodywork. They are used on the Porsche 911 and 912 from 1965 to 1998 Coupe, Targa or Cabriolet :

- Porsche 912 from 1965 to 1969 and 1976
- Porsche 911 Series F and G from 1965 to 1989
-Porsche 911 Turbo from 1975 to 1989
- Porsche 911 type 964 from1989 to 1994
- Porsche 911 type 993 from 1994 to 1998

7 clips are needed per molding
14 clips for both sides

Round plastic clip for bodywork 4 x 12 mm for fixing (depending on model):
- Acronyms for car
- Radiator grille
- Wings
- Wing extension
- Mudguard
- Grille car

This bodywork clip is used for door panel trims for Renault/Ford/Peugeot and Citroën.

Panel thickness: 0.6 -> 1.6 mm
Diameter: 6.0 mm
Trim hole size: 8.2 -> 8.5 mm

Assortment of bodywork clips for BMW and VW.

- 35 bumper cover clips, to be used as BMW OE 51118174185
- 40 lining clips, use the same as you would BMW OE 703867299, VW OE 823867299
- 80 nut sockets, use the same as you would BMW OE 51311802258
- 80 connection clips, use the same as you would BMW OE 51131804205
- 35 spacer clips, to be used as BMW OE 51481938725
- 20 spacer clips, use the same as you would BMW OE 51131960054

Quantity: 290 pieces

Door sill rivet for:
- 911 S from 1967 to 1969
- 911 from 1969 to 1973
- 914

These upholstery staples - x200 are required for finishing the seat covers.

These upholstery staples sold in packs of 200 are compatible with the seat trims of all 2cv cars and derivatives.
Fitting these upholstery staples, known as "pignose staples", requires special pliers.

This screw cover for Corrado and Golf 3 and 4 Cabriolet - 3D is a 3D-printed part.

This screw cover for Golf 3, 4 and Corrado faithfully reproduces the original VW part. Extremely faithful reproduction made in ABS.
This remanufactured part was produced exclusively for MECATECHNIC using the 3D printing process by a French company specializing in the reproduction of rare or missing parts. This piece has been finished to perfectly reproduce the original grain.

Plastic clip for Citroën ID door panel trim.
Attached to the top of the panel on some Citroën ID models, there are 4 clips per panel.
Compatible with all Citroën ID models.

Rubber on inner door panel clip.
For 7mm diameter holes.
Please check if holes are 6 or 7mm and how many to order.
Sold individually.

For Beetle

Retaining clip for door padding. Sold individually. Original Volkswagen Classic Parts.

For VW Type 3, all models
Years: 04/1961 ->07/1963.
Chassis: up to no. 221 974.

Assortment of clips for Mazda

Quantity: 240 pieces

Original Mazda products (quantity x OEM code):

- 30 x OEM 2042301, OEM MB345544
- 20 x OEM 90675SB003, OEM 75521611000
- 20 x OEM 1007932, OEM 6384401A00
- 40 x OEM 6686001W01, OEM 94051933
- 20 x OEM 1673046, OEM 10139822, OEM 6508197AA
- 25 x OEM 1007932, OEM 6502871
- 10 x OEM 1H0867199A, OEM 51481915964
- 15 x OEM 6387801E10
- 20 x OEM W706713S300, OEM NAU156145
- 15 x OEM A1269900392
- 15 x OEM A9904692
- 10 x OEM 1H0819055C01C

Door sill trim clip for Porsche Cayenne 955 and Volkswagen Touareg
Fixes the door sill bar to the floor
Sold individually

6 door panel clips for Porsche 911 type F and G from 1965 to 1989 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1989

Complete set of trim strips for interior door panels.
This complete Wolfsburg West quality set is a high quality reproduction made of stainless steel that is the same shape of the original moulding.
Composed of:
- 4 panel mouldings (front and back)
- mounting clips

For VW Beetle Split saloon and Convertible
Years: (10/1952-07/1955)

This clip in original quality allows the attachment of the side skirt of Porsche 911 type 964 :

- 964 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 Carrera RS from 1992

Required quantity per underbody : 6

Sold individually