Measuring tool

0

- Set of 19 blades (round ended): 4/100 --> 100/100 mm.
- Length of blades: 90 mm.
Weight: 60 g.

Enables hands free measuring.
Measures curved or flat steel surfaces.
Flexible.
Metric and inch scales.
Metric and inch scales.
Metric and imperial scale plus radian for measuring arc length to radius.

- Ground stainless steel.
- Base of sector divided into mm.
- Double inversedivision from 0 to 180°.
- Ø of sector : 85 mm.
- Length of the ruler : 170 mm.
- Easy reading thanks to illuminated index.
Weight: 150 g.

Screen: LCD
Measuring range: 0 to 220°
Resolution : 0.1°
Accuracy: +/- 0.5% angle
Modes: horizontal and vertical
Aluminium casing
Incl. 9V battery

This FACOM 150 mm caliper with internal/external and depth sockets is designed for use in the automotive and industrial sectors.
For easy reading, it is equipped with a digital display with a resolution of 0.01 mm. Measurements can be made in mm and inches.
Its accuracy is 1/100th - 0.01 mm.

It is the essential tool for your workshop!

The protection class is IP20.
Delivered with battery CR2032.

This caliper will enable you to take interior and exterior measurements, but can also be used as a depth gauge. It is made of chrome-plated material and has a measuring range of 0-150 mm / 1/20th.

Supplied in a protective case.

Portable tester enabling most 1.5 and 9 V batteries to be tested, as well as most fuses and bulbs.

Easy to read.

Requires a 9 V battery (not supplied).

- suitable for mini, standard and maxi-fuses
- LED does not light if fuses are damaged
- with clip for fuse removal

Ideal for use in the automobile, motorbike, HGV sector, but also for domestic uses such as radiators, solar panels, etc.

Température: - 50 C° to + 280 C°
Laser targeting
Stores information
Automatic stop function
LCD screen
Accuracy: +/- 2%

Batteries: 2 x AAA (supplied)

This tool enables you to detect/trace cables and find short circuits and interruptions without damaging the insulation.

The principle is simple, a signal is sent to the circuit for testing via the transmitter. It is detected by the receiver sensor along the cable and emits an acoustic signal through the receiver.

It is suitable for vehicle electrical circuits with 12 and 24 volts DC.

Use in cars, motorcycles and trucks.

Lights up a test LED during vehicle electronics diagnostics.

Product benefits:

- The connectors at the end can be connected to a multimeter (4mm connector)
- The sensors are very precise and offer excellent connectivity.
- Enables the detection, for example, of faults in the 12 V injectors of petrol engines, engine sensors, actuators, relays, the low-voltage side of the ignition coil etc., in order to detect a switching signal.

Not to beused on the high voltages of Diesel injectors.

Description :

- Take the temperature without touching the object using laser technology
-Scale from -20 to +200° Celsius
- Accurate to 2%

This spring stay is made of hardened and ground tips. It is made of carbon steel.

The arms are articulated around a shaft and are held in place by a leaf spring.
You adjust it by means of a quick adjustment nut.

Its length is 202 mm.

Decreasing thickness measuring edge to measure the tapered gap in order to rectify the gap between the electrodes.

Measures: from 0.5 to 2.55 mm

This CSP tool determines the dimensions of bearing no. 4 of the crankshaft of a VW Type 1, Type 4 or water boxer engine in order to fit the right bearings during the repair and preparation of the engine.

This CSP tool determines the dimensions of half-crankcase bearings no.4 of a VW Type 1 or Type 4 engine block in order to fit the right bearings during the repair and preparation of the engine.

This CSP tool determines the dimensions of bearings nos. 1, 2 and 3 on the engine half-crankcases on a VW Type 1 to be determined in order to fit the right bearings during the repair and preparation of the engine.

This CSP tool determines the dimensions of bearings nos. 1, 2 and 3 of a VW Type 1 engine crankshaft. Also able to measure the connecting rod crank pins on the crankshaft of VW Type 1, Type 4 1700, 1800 cc and 1900 and 2100 cc water boxer engines in order to fit the correct bearings during the repair and preparation of the engine.

This CSP tool determines the dimensions of bearings nos. 1, 2 and 3 on the engine half-crankcases on a VW Type 4 engine block in order to fit the right bearings during the repair and preparation of the engine.