Pneumatic tool

This pneumatic gun can be used with cleaning products, solvents,oil...

Capacity: 1000 cm3

This type 42 special metal cutting disc has a diameter of 115 mm. It is ideal for TB04876 angle grinders or equivalent.

Its maximum speed is 13 300 rpm (max 80 m/s)

Disc diameter: 115 mm
Disc thickness: 2.5 mm
Drilling diameter: 22.2 mm
Gross weight: 70 g
Sold individually.

- for easy and quick riveting
- suitable for rivet sizes 2.4 - 3.2- 4.0 - 4.8 mm
- pulling power: 720 kg
- air consumption : 0.86 l/min
- stroke: 14 mm
- air inlet: 1/4"
- working pressure: 6.2 bar

What is a TOOLATELIER inflator used for?

The pneumatic inflator is the final element in the compressed air circuit. It is used to pressurize car tires.

What's it made of?

The inflator gun, also known as a eurodainu, consists of a 1/4" male coupling which connects to the female hose coupling, a trigger to allow compressed air to pass through, a handle for ease of use, a valve to release the pressure, a 270° pressure gauge(0-12 bar) and a 400 mm flexible hose.

Connector for standard air hoses.

Material: brass
Fluted tip: 6 mm

Length: 100 cm

When changing the hose it is recommended that you apply teflon to the thread to avoid air leaks.

Connector for compressed air hose.
- Internal connector - 3/8"

Sold individually

This repair kit is ideal for the pneumatic angle grinder product ref UO99973.

Product benefits:

- Uses: For grinding, cutting, polishing, shaping, deburring and handling

- Capacity: 1/4" (6 mm)
- Shaft size: 127
- Speed: 18,000 rpm
- Required air pressure: 6.2 bar / 90 psi
- Air intake: 1/4"
- Average air consumption : 99 l/min
- Length: 155 mm
- Weight: 790 g

Ideal for grinding contours, cutting, polishing, shaping, deburring, grinding, finishing and roughing operations.

This straight grinder is light and easy to control for intensive use.

Features:

- Chuck: 6 mm
- Length: 120 mm
- Compressed air coupling: 6.3 mm (1/4")
- Working pressure: 6.2 bar
- Idling speed: 25,000 rpm
- Air consumption: 68 l/min
- Acoustic pressure level: LpA = 88 dB(A)
- Acoustic power level: LpA = 99 dB(A)
- Vibration level: ahd = 1.82 m/s2 - K = 0.68 m/s2
- Weight: 340 g

- 54.000 speed /min
- 1/4" air hose connection
- air consumption 0,143 m3/min
- 90 PSI air pressure required
- various grinding stones and automatic oiler included

Connector for compressed air hose.
- Internal connector: 1/4"

Sold individually

This 0 to 10 bar calibrated pneumatic inflator is designed for intensive use.

The length of the hose is approximately 540 mm.
The scale diameter is 56 mm.
The gross weight is 490 g

Ø: 60 mm

For pneumatic dent puller, product no. UO10915 or equivalent

Male threaded connection for compressed air hose.
- External connection: 3/8
- Thread diameter: 16 mm

This inflator is used to pressurise tyres equipped with Schrader valves.

It is equipped with 4 x PSI, Bar, Mpa and Kg/cm2 selectable pressure units. Its maximum pressure is 8 bar. The manometer has a diameter of 59 mm with a display of 26 x 13 mm.

It is equipped with 2 CR2032 3V batteries that are included.

Specifications:

Pressure range (psi): 0.0 - 58.0 psi
Pressure range (bar): 0.00 - 4.00 bar
Pressure range (MPa): 0.000 - 0.400 MPa
Pressure range (kg/cm²): 0.00- 4.00 kg/cm2

Spray gun for applying undercoating, supplied with 2 nozzles, 2 disposable dip tubes and a tube for cavities.

- Connector: 8 mm

Attached by a locking clip (not included)

Replacement nozzles for undercoating gun, product no. TB00790,

Set of 6 rubber tubes and 6 nozzles.

This 10 m-long air hose with 6 mm inner diameter is ideal for compressed air applications. Its maximum pressure is 20 bar (290 PSI). It is used with 1/4" BSP (6.3 mm) fittings.

Whether for intensive or occasional use, you'll be completely satisfied.