Pneumatic tool

This oil is ideal for lubricating all pneumatic tools.

Regular lubrication is essential to keep your pneumatic tools in perfect working order.

Capacity: 100 ml

This 75mm diameter cutting disc is ideal for the TB04914 extra long grinder and UO10184 disc grinder or equivalent.

Max.rpm 20.000 rpm
Disc diameter: 75 mm
Drilling diameter: 9.7 mm

This hose is extremely flexible. It is made from a combination of hybrid polymer with rubber and vinyl. This means that it remains perfectly flat once unwound.

Size: 9.5 mm x 15 m

- Resistant to oil, UV, abrasive materials and weather
- Connector: 1/4"
- Max. recommended working pressure: 20 bars ( 300 psi)
- Burst pressure: 60 bars (900 psi)
- Colour: blue

This hose withstands temperatures from - 40 °C to + 60 °Celsius.

Pneumatic grinder also called an angle grinder, with a steel casingand lateral handle for better control.

Air consumption : 113 l/min
Diameter of the grinding disc: 10 cm
Diameter axis : 16 mm

Contents:

- 1 grinder
- 1 grinding disc
- locking keys and pin-type face spanners
- 1 1/4" quick connecto

What is a TOOLATELIER inflator used for?

The pneumatic inflator is the final element in the compressed air circuit. It is used to pressurize car tires.

What's it made of?

The inflator gun, also known as a eurodainu, consists of a 1/4" male coupling which connects to the female hose coupling, a trigger to allow compressed air to pass through, a handle for ease of use, a valve to release the pressure, a 270° pressure gauge(0-12 bar) and a 400 mm flexible hose.

This 0 to 10 bar calibrated pneumatic inflator is designed for intensive use.

The length of the hose is approximately 540 mm.
The scale diameter is 56 mm.
The gross weight is 490 g

Length: 100 cm

When changing the hose it is recommended that you apply teflon to the thread to avoid air leaks.

Ø: 60 mm

For pneumatic dent puller, product no. UO10915 or equivalent

Connect this hammer to your compressor, and the suction cup creates a vacuum and sucks up the sheet metal to make dent removal easier.

- 3 interchangeable suction cups: diameter 60 mm, 120 mm, 155 mm
- Nozzle: 1/4".
- Length: 620mm
- Suction pad thread diameter: 20 mm x 1.75
- Impact weight: 1500 g

For optimum suction, a pressure of at least 10.5 bar (150 PSI) is required.

Ideal for grinding contours, cutting, polishing, shaping, deburring, grinding, finishing and roughing operations.

This straight grinder is light and easy to control for intensive use.

Features:

- Chuck: 6 mm
- Length: 120 mm
- Compressed air coupling: 6.3 mm (1/4")
- Working pressure: 6.2 bar
- Idling speed: 25,000 rpm
- Air consumption: 68 l/min
- Acoustic pressure level: LpA = 88 dB(A)
- Acoustic power level: LpA = 99 dB(A)
- Vibration level: ahd = 1.82 m/s2 - K = 0.68 m/s2
- Weight: 340 g

This repair kit is ideal for the pneumatic angle grinder product ref UO99973.

- 54.000 speed /min
- 1/4" air hose connection
- air consumption 0,143 m3/min
- 90 PSI air pressure required
- various grinding stones and automatic oiler included

Product benefits:

- Uses: For grinding, cutting, polishing, shaping, deburring and handling

- Capacity: 1/4" (6 mm)
- Shaft size: 127
- Speed: 18,000 rpm
- Required air pressure: 6.2 bar / 90 psi
- Air intake: 1/4"
- Average air consumption : 99 l/min
- Length: 155 mm
- Weight: 790 g

This pneumatic angle drill is ideal for use in limited spaces such as engine compartiments, etc.

The chuck size is 10 mm. Compressed air is supplied at 6.2 bar with a 1/4" (6.3 mm) compressed air fitting. It is 19.5 cm long.

It is recommended to use an air pipe with a 10 mm diameter.

Produces clean, dry, regulated compressed air and good lubrication.
This filter prevents costly damage to pneumatic tools caused by scale, rust and moisture.

- Operating pressure: 10 bar
- Reservoir capacity: 150 ml
- Female BSP connection: 1/4" (6.35 mm)

Easy to install

Automatic line greaser for pneumatic tools.
Made from solid brass and has a transparent tank to check the oil level.

Male and female connectors: 1/4" (6 mm)
Total length: 55 mm

- length 255 mm
- stampØ 5 mm
- punches up to 1.5 mm thickness
- also suitable for stainless sheets
- air consumption 113 l/min

- quick release for faster and easier change of working heads
- 3 tools in one
- 12.5 (1/2) air ratchet
- drillingmaschine
- air grinder with 6 mm shank
- incl. chuck
- workingpressure: 6.3 bar
- air connection : 1/4"
- quick air coupling

Hobby kit , ideal for DIY use

contents:
- 1/2" reversible impact wrench
- BSP nipple
- oil pot
- 125 mm impact extension bar
- hex. adaptor
- 10 impact sockets 9-10-11-13-14-17-19-22-24-27 mm
- max. torque 320 Nm

Pneumatic angled impact wrench

- Connector: 1/4"
- Length: 175 mm
- Torque: 34 Nm
- Air consumption : 113 l/mn
- RPM: 240
- Max. pressure: 6.2