Strut bar brace

The legendary 80s IRESA bar is back!
Fitted with a tie rod, this 3-point bar has the particularity of fastening to the gearbox: maximum rigidity.
Zinc-plated steel

Barre inférieure se fixant entre les 2 triangles, permet de rigidifier le train avant et diminuer le roulis

Pour Golf 1 :
- 1.5L
- 1.6L
- 1.8L

Lower bar fixed between the 2 triangles, allows to stiffen the front axle and to reduce the roll,

For VW Scirocco 1 and 2:
- 1.5L
- 1.6L
- 1.8L

Suitable for:
- Golf 2 1.6 and 1.8
- Golf 3 Saloon, Variant and Cabriolet excluding VR6/Vento
- Polo 6N

For :
- Golf 2 & Jetta 2
- Golf 3, Golf 3 Cabriolet & Vento
- Golf 4 Cabriolet
- Corrado

Prevents deformation of the box, increases cornering stability and steering precision. To set (drilling) in the trunk between the wells of suspension. Setting the bar allows easy installation of different versions. (820-960 mm)

Non-adjustable steel bar
For Golf 2 and 3 all models
Fastens to the rear shock absorber wells

Rearsway bar for Bmw 5 Series:
- Compatible with all Bmw 5 Series E60 Sedan and E61 Touring versions from 07/2001 to 09/2010 except 4-wheel drive ix and xd models.

Adjustable aluminium front topscraper bar for VW Golf 1 and Scirocco.
Fits all Golf 1 and Scirocco 1 and 2 except 16S engines and carburetors.
ATTENTION: Depending on model and year, you may need to modify the expansion tank (offset the jar to leave the cap accessible)!Not suitable for 1.8 112hp (DX) models whose vacuum solenoid valves are mounted on the passenger shock absorber well.

Front upper anti-climb bar for Volkswagen Golf 6
For VW Golf 6 all models
This aluminium top sway bar prevents body deformation and increases cornering stability.

OMP front upper suspension strut brace for:
- Mini One 1.6, Cooper and Cooper S from 09/2001 to 10/2006

Rear axle brace for Mazda MX-5 NA and NB/NBFL

- Lower rear axle reinforcement bar
- Comes with bolts and nuts
- Comes with assembly instructions

Front axle brace for Mazda MX-5 NA and NB

This reinforcement bar acts as an anti-collision bar for the transmission tunnel. To be positioned under the gearbox, the fixing points are already present on the chassis. This bar already equips the 1.8 and NBFL models

Delivered with fixing kit

Rear axle brace for Mazda MX-5 NA and NB

- Upper rear axle reinforcement bar
- Stiffens the chassis for sports driving
- Comes with bolts and nuts

Can be fitted with the lower bar part no. MX10957

Front upper anti-climb bar for Volkswagen Scirocco 3
For VW Scirocco 3 all models
This aluminium anti-sway bar prevents body deformation and increases cornering stability.

MX5 NC NCFL gearbox tunnel reinforcement frame with manual gearbox

- Increases the torsional rigidity of the chassis
- Comes with fitting kit
- Approved for road use

Front cradle reinforcement for Mazda MX5 NC and NCFL

For NC and NCFL all models except automatic gearbox

Increases cradle stiffness for a more incisive front drivetrain
Comes with fitting kit
Approved for road use

This front upper strut bar. It fits all Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

It has steel support cut in the mass and an adjustable carbon bar. Offering more rigidity in compression and torsion than steel and aluminum, this carbon version is also lightweight.

This front upper strut bar has steel support cut in the mass and an adjustable carbon bar. Offering more rigidity in compression and torsion than steel and aluminum, this carbon version is also lightweight. It fits all Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Set of 3 aluminium anti-tamper bars for VW Golf 1, including :- 1 adjustable upper front bar- 1 lower front bar- 1 adjustable rear top bar
Not suitable for 16S enginesNot suitable for 1.8 112hp (DX) with vacuum solenoid valves mounted on the passenger shock absorber well

Top engine anti-climb bar for Bmw 1 Series:
- Compatible with all Bmw 1 Series F20 and F21 versions from 07/2010 to 06/2019 including 3 and 4 cylinder diesel models.