Silent blocks

These silencers are of optimum quality compared to the original;
the design defects have been corrected so that it lasts
longer and works more efficiently,

For Roadster (E85) and Coupé (E86):
- All models except Z4 M

Kit of 2 POWERFLEX silentblocs for the front suspension arm for BMW series 3 E30 :

- All models (except M3)

These non-eccentric reinforced models for a standard caster angle are located on the rear part of the front suspension arms (see number 1 in the diagram).

Polyurethane version recommended for sporty driving use on the road which will provide better guidance of the front end in support and better reactivity due to its increased rigidity, as well as greater longevity compared to the original rubber part, without sacrificing comfort.

Need only one kit of 2 silentblocs per vehicle (valid for the 2 wishbones on the right and left side)

Kit of 2 POWERFLEX silentblocs for the front suspension arm for BMW series 3 E36 :

- All models (except M3)

These non-eccentric reinforced models for a standard caster angle are located on the rear part of the front suspension arms (see number 1 in the diagram).

Polyurethane version recommended for sporty driving use on the road which will provide better guidance of the front end in support and better reactivity due to its increased rigidity, as well as greater longevity compared to the original rubber part, without sacrificing comfort.

Need only one kit of 2 silentblocs per vehicle (valid for the 2 wishbones on the right and left side)

Set of four POWERFLEX polyurethane silent blocks for upper transversal arm for VOLKSWAGEN Transporter T25 from 1979 to 1992

Set of four POWERFLEX polyurethane silent blocks for the reaction link for a VOLKSWAGEN Transporter T25 from 1979 to 1992

Made of polyurethane, for Golf 4, Bora and New Beetle
Not suitable for 4Motion (4x4) versions

These bushes prevent lateral sag in bends, improve rear axle guidance and road holding.

Outer diameter: 69 mm (check on the vehicle because there are 2 different fitments)

Complete set of front and rear shock absorbers for Mazda MX5 NA, NB and NBFL

For all models including sport chassis

Contains the 22 rubber silentblocks to reconstruct all the suspension linkages:

4 front upper linkage silentblocks
2 silentblocks for the front lower linkage
2 silentblocks for the rear lower front linkage
6 rear upper linkage silentblocks
4 silentblocks for the rear lower linkages on the cradle side
2 silentblocks for the front wheel-side lower rear linkage
2 silentblocks for the wheel-side rear lower linkage

Quality adaptable parts

Does not contain the anti-roll bars silentblocks

Complete set of front and rear silentblocks for Mazda MX5 NB and NBFL

For all models including sport chassis

Contains the 22 rubber silentblocks to reconstruct all the suspension linkages:

4 front upper linkage silentblocks
2 silentblocks for the front lower linkage
2 silentblocks for the rear lower front linkage
6 rear upper linkage silentblocks
4 silentblocks for the rear lower linkages on the cradle side
2 silentblocks for the front wheel-side lower rear linkage
2 silentblocks for the wheel-side rear lower linkage

Quality adaptable parts

Does not contain the anti-roll bars silentblocks

ForGolf 1 except Caddy

Complete set of silentblocs and repair parts for original rear anti-roll bar for VW Beetle and Karmann-Ghia type 14 since 08/1964 models: 1200, 1300, 1500 and since chassis No. 115 000 001Wolfsburg West manufacturing quality

Kit consisting of 2 brackets with bushings + hardware, enables you to repair both sides of the front axle,

Suitable for E36:
- All models except M3

It is necessary 4 per vehicles.

Kit with 2 crenellated interiors and 2 round exteriors.
For mounting on rear axle with trumpets or universal joints:

For VW Beetle

Suitable for:
- Golf 2 all models (except Rallye, Country and Syncro)
- Corrado all models except VR6

Set of two POWERFLEX polyurethane silent blocks for front transversal arm for a VOLKSWAGEN Transporter T25 from 1979 to 1992

Set of four POWERFLEX polyurethane silent blocks for the rear suspension arm for a VOLKSWAGEN Transporter T25 from 1979 to 1992

Pour barre stabilisatrice en 20,5 mm
Vendu à l'unité.

For more precise steering and road holding,
this set of reinforced urethane silentblocs improves
the triangulation of the front axle of your 1302 or 1303:
- 2 anti-roll bar silentblocs on chassis
- 4 silentblocs between arm anti-roll bar and suspension arm
- 2 suspension arm silentblocs
Original diameter.

For Beetle 1302 & 1303 up to ->07/1973
version with 3 mounting point shock absorbers
up to chassis no. ->133 3200 000

Upper half-collar mounted on the body to retain the inner bush, on the chassis side, for the front sway bar for Volkswagen Golf 1

Upper half-collar mounted on the body to retain the inner bush, on the chassis side, for the front sway bar for Volkswagen Scirocco