Silent blocks

Eccentric polyurethane silentblocks of the 2 suspension arms lower and upper, to left driver's side or right passenger's side for MINI III R57, R57LCI Convertible,R58 Coupeand R59 Roadster :

R57 Cabriolet:
- Cooper 1.6L 120hp from 10/2007 to 06/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 08/2008 to 07/2010 (engine code N14B16)

R57LCI Convertible:
- Cooper 1.6L 122hp from 09/2009 to 06/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 07/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 05/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 06/2009 to 05/2015 (engine code N47C20)
- Cooper D 1.6L 112hp from 05/2009 to 05/2015 (engine code N47C16)
- Cooper D 2.0L 112hp from 11/2010 to 05/2015 (engine code N47C20)
- One 1.6L 98hp from 09/2009 to 06/2015 (engine code N16B16)

R58 Coupe:
- Cooper 1.6L 122hp from 12/2010 to 04/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 12/2010 to 04/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 12/2010 to 07/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 05/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 12/2010 to 05/2015 (engine code N47C20)

R59 Roadster:
- Cooper 1.6L 122hp from 01/2011 to 04/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 01/2011 to 04/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 04/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 01/2011 to 04/2015 (engine code N47C20)

This kit includes:
- 2 silentblocks for the upper suspension arm (right or left)
- 2 silentblocks for the lower suspension arm (right or left)

Quantity needed per vehicle: 2 kits

1 kit is suitable for replacement of the original rubber non-eccentric silentblocks for one side only. So you will need to order 2 kits necessarily because each suspension arm must have eccentric silentblocks to allow their adjustment.

With these eccentric silentblocks, the original geometry of the rear axle can be adjusted. You will be able to change the camber and toe-in of the rear wheels to make the chassis dynamic behavior more incisive and improve cornering.

The polyurethane material offers morestiffness and better durability compared to the original rubber silentblocks. This improves handling for a sportier and safer ride.

Front wishbone bushes for:
- 944 from 1987 to 1991
- 968 from 1992 to 1995

2 POWERFLEX Road Series silentblocs rear anti-roll bar N°4 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 from 1991 to 1994 - manual gearbox
- 964 3.6 Carrera 4 from 1991 to 1994

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 20 mm

Quantity needed per vehicle : 1 Kit

Set of 8 rear lower linkage silentblocks for Mazda MX-5 NA

For MX-5 NA all models

Enables you to replace the silentblocks of your two rear right and left lower linkages

4 silentblocks for the inside of the linkages
4 silentblocks for the outside of the linkages

Kit for a vehicle
High quality adaptable parts

Rear lower front linkage silentblock for Mazda MX-5 NA all models

Fits on the back of the lower front linkage
One silentblock required per linkage
see diagram

Genuine Mazda part

These reinforced models located on the rear part of the rear suspension arms (see number 3 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) and Coupé (E86):

These polyurethane bushes are 25% more rigid than the original versions. They improve road holding and have a much longer service life,

Suitable for Audi A4 (B6) Saloon and Avant:
- All models including S4

Enables the link between the rear differential and the rear axle support

For E90, E91, E92 & E93:
- All models (except M3)

For E90 LCI, E91 LCI, E92 LCI & E93 LCI:
- All models (except M3)

anti-roll bar silentblock for:

- MX5 NC and NCFL all engines
- Diameter: 21mm

Sold individually

For X5 E53:
- All models

These reinforced models located on the lower guide arms of the front axle (see number 2 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version,

For Audi A4 (B5) from 1994 to 2001:
- All models including "S4" and "RS4"

Suitable for VOLKSWAGEN Passat 5 from 1997 to 2005 from chassis No. 3B-V-000001-> up to chassis No. ->3B-5-200000

Covers the silentbloc and retains the rear axle torsion strip

For VOLKSWAGEN Combi Split Brazil (1957-1975)

For Polo 9N1:
- 1.2 54hp and 64hp (AWY, BMD, AZQ, BME)
- 1.4 75hp and 85hp (AUA, BBY, BKY, AXU)
- 1.4 100hp (AUB, BBZ)
- 1.4 TDi 75hp (AMF, BAY)
- 1.9 SDi 64hp (ASY)
- 1.9 TDi 100hp and 101hp (ATD, AXR)

For Polo 9N3,
up to chassis ->9N-9-050000:
- 1.2 54hp and 60hp (BMD, BBM)
- 1.2 64hp and 70hp (BME, BZG)
- 1.4 75hp and 80hp (BKY, BUD)
- 1.4 85hp (BLM) up to chassis ->9N-9-175000
- 1.4 85hp and 100hp (AXU, BBZ)
- 1.4 TDi 68hp and 70hp (BNM, BWB)
- 1.4 TDi 80hp (BMS, BNV)
- 1.6 100hp (BAH) up to chassis ->9N-9-175000
- 1.6 105hp (BNV)
- 1.8 150hp and 179hp (BJX, BBU)
- 1.9 SDi 64hp (ASY)
- 1.9 TDi 100hp and 101hp (ATD, BMT, AXR)
- 1.9 TDi 130hp (ASZ, BLT)
- 2.0 116hp (BBX) up to chassis ->9N-9-175000

Suitable for :
-E36 all engines except M3

Rear upper linkage silentblock for Mazda MX-5 NA all models

3 required per linkage
Sold individually

Genuine Mazda part

For VOLKSWAGEN Transporter T6, 27 mm diameter rear sway bar.

Sway bars are available in several diameters, please measure the one on your vehicle before ordering.

Front twin silentbloc tube for:
- 911 from 1965 to 1973
- 912
- 914

Set of two POWERFLEX polyurethane rear silent blocks for the front wishbone for a VOLKSWAGEN Transporter T5 from 2003 to 2015.

Outer reaction link silentbloc for:
- 911 from 1965 to 1968
- 912

Mount outside the reaction link (in the cover).