Steering boot

MEYLE rack bellows for Porsche Boxster type 986 from 1997 to 2004 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002

- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Please note: only suitable for racks with the following original part numbers:

- 996 347 011 06
- 996 347 011 07
- 996 347 012 07
- 996 347 012 08

Material: EPDM (ethylene-propylene-diene monomer) and PP (polypropylene)

The bellows are sold individually and are suitable for both left and right sides.

This lower steering column bellows for 2CV after 1970 is faithful to the original.This lower steering column bellows is made of rubber.
Itseals the passenger compartment where the steering column passes through the apron.

MEYLE rack bellows for Porsche 911 type 996 from 1998 to 2005 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005

- 996 3.6 Turbo - 420 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) from 2005

- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) from 2005

- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) from 2004

Please note: only suitable for racks with the following original part numbers:

- 996 347 011 06
- 996 347 011 07
- 996 347 012 07
- 996 347 012 08

Material: EPDM (ethylene-propylene-diene monomer) and PP (polypropylene)

The bellows are sold individually and are suitable for both left and right sides.

MEYLE power steering rack bellows for Peugeot 205

Bellows gasket for Peugeot 205 , higher quality than original MEYLE.

Fits catalyzed and non-catalyzed versions, left-hand side.

Suitable for the following models with power steering:

Peugeot 205, 3 and 5-door versions:

- 205 1.0 L - 45hp from 02/1983 to 10/1987
- 205 1.1 L - 49hp from 02/1983 to 10/1987
- 205 1.1 L - 50hp from 02/1983 to 10/1987
- 205 1.3 L - 62hp from 02/1984 to 10/1987
- 205 1.4 L - 60hp from 02/1983 to 10/1987
- 205 1.4 L - 72hp from 02/1983 to 10/1987
- 205 1.4 L - 79hp from 10/1985 to 10/1987
- 205 1.4 L - 80hp from 02/1983 to 10/1987
- 205 1.5 L - 86hp from 02/1984 to 10/1987
- 205 1.6 L - 72hp from 03/1987 to 10/1987
- 205 1.6 L - 75hp from 08/1986 to 10/1987
- 205 GTI 1.6 L - 103hp from 12/1984 to 10/1987
- 205 GTI 1.6 L - 120hp from 02/1983 to 07/1987
- 205 Diesel 1.7 L - 60hp from 08/1983 to 10/1987
- 205 Rallye 1.8 L - 200hp from 07/1984 to 02/1986
- 205 GTI 1.9 L - 102hp from 03/1987 to 10/1987
- 205 GTI 1.9 L - 128hp from 10/1986 to 10/1987

Peugeot 205 Cabriolet :

- 205 CJ 1.1 L - 60hp from 10/1989 to 12/1994
- 205 1.4 L - 68hp from 08/1987 to 07/1990
- 205 CJ 1.4 L - 60hp from 03/1988 to 05/1989
- 205 CJ 1.4 L - 67hp from 03/1989 to 12/1994
- 205 CJ 1.4 L - 75hp from 05/1991 to 12/1994
- 205 CJ 1.4 L catalyzed - 60hp from 01/1989 to 09/1993
- 205 CT 1.4 L - 79hp from 04/1986 to 12/1988
- 205 1.6 L - 116hp from 08/1987 to 07/1992
- 205 CJ 1.6 L - 88hp from 08/1992 to 12/1994
- 205 CTI 1.6 L - 103hp from 04/1986 to 10/1990
- 205 CTI 1.9 L - 101hp from 08/1987 to 07/1990
- 205 CTI 1.9 L - 102hp from 10/1987 to 12/1994

Peugeot 205 Phase II, 3 and 5-door versions :

- 205 1.0 L - 45hp from 10/1987 to 09/1998
- 205 1.0 L - 50hp from 08/1992 to 05/1997
- 205 1.1 L - 49hp from 10/1987 to 10/1990
- 205 1.1 L - 54hp from 10/1987 to 10/1990
- 205 1.1 L - 60hp from 07/1989 to 09/1998
- 205 XA 1.1 L - 54hp from 07/1987 to 10/1988
- 205 1.2 L - 64hp from 01/1987 to 12/1990
- 205 1.3 L - 64hp from 08/1990 to 07/1992
- 205 Rallye 1.3 L - 101hp from 10/1987 to 10/1990
- 205 1.4 L - 60hp from 10/1987 to 05/1989
- 205 1.4 L - 67hp from 10/1987 to 10/1990
- 205 1.4 L - 68hp from 08/1990 to 07/1992
- 205 1.4 L - 72hp from 01/1987 to 07/1988
- 205 1.4 L - 75hp from 07/1988 to 09/1988
- 205 1.4 L - 75hp from 08/1990 to 07/1998.
- 205 1.4 L - 79hp from 07/1988 to 09/1998
- 205 1.4 L - 84hp from 06/1987 to 12/1989
- 205 1.4 L - 86hp from 06/1987 to 12/1989
- 205 Catalyzed 1.4 L - 60hp from 08/1987 to 09/1993
- 205 1.6 L - 72hp from 10/1987 to 09/1998
- 205 1.6 L - 75hp from 10/1987 to 09/1998
- 205 1.6 L - 90hp from 08/1990 to 07/1992
- 205 Automatic 1.6 L - 79hp from 10/1987 to 09/1998
- 205 Automatic 1.6 L - 88hp from 05/1990 to 09/1998
- 205 GTI 1.6 L - 103hp from 10/1987 to 09/1989
- 205 GTI 1.6 L - 116hp from 10/1987 to 12/1989
- 205 GTX 1.6 L - 94hp from 01/1987 to 10/1991
- 205 Diesel 1.7 L - 60hp from 07/1987 to 09/1998
- 205 TD 1.8 L - 78hp from 01/1990 to 09/1998
- 205 XDT 1.8 L - 79hp from 08/1990 to 09/1998
- 205 Diesel 1.9 L - 64hp from 10/1987 to 09/1998
- 205 GTI 1.9 L - 102hp from 10/1987 to 05/1989
- 205 GTI 1.9 L - 120hp from 10/1987 to 10/1994
- 205 GTI 1.9 L - 128hp from 10/1987 to 09/1998
- 205 GTI 1.9 L catalyzed - 102hp from 10/1987 to 07/1994

Your original dust cover is often punctured or torn, this rubber power steering pinion dust cover will replace the original cover on your Citroën ID.
Compatible with all Citroën ID models.

For E46:
- All models including M3
(excluding 4-wheel drive models)

MEYLE rack bellows for Porsche Cayman type 987 from 2007 to 2012 :

- 987 Cayman 2.7 - 245 hp (M97.20) from 2007 to 2008
- 987 Cayman S 3.4 - 295 hp (M97.21) from 2006 to 2008
- 987 Cayman S Sport 3.4 - 303 hp (M97.22) from 2008
- 987 Cayman 2.9 - 265 hp (MA1.20) from 2009 to 2012
- 987 Cayman S 3.4 - 320 hp (MA1.21) from 2009 to 2012
- 987 Cayman R 3.4 - 330 hp (MA1.21) from 2011 to 2012

Material: EPDM (ethylene-propylene-diene monomer) and PP (polypropylene)

The bellows are sold individually and are suitable for both left and right sides.

Rack and pinion bellow MEYLE for Porsche Cayman type 981 all models from 2014 to 2016 :

- 981 2.7 Cayman - 275 hp (MA1.22) from 2014 to 2015
- 981 3.4 Cayman S - 325 hp (MA1.23) from 2014 to 2015
- 981 3.4 Cayman GTS - 340 hp (MA1.23) from 2014 to 2015
- 981 3.8 Cayman GT4 - 385 hp (MA1.24) from 2015 to 2016

Material: EPDM (ethylene-propylene-diene monomer) and PP (polypropylene)

The bellows are sold individually and are suitable for both left and right sides.

MEYLE rack bellows for Porsche Boxster type 987 from 2005 to 2012 :

- 987 Boxster 2.7 - 240 hp (M96.25) from 2005 to 2006
- 987 Boxster S 3.2 - 280 hp (M96.26) from 2005 to 2006
- 987 Boxster 2.7 - 245 hp (M97.20) from 2007 to 2008
- 987 Boxster S 3.4 - 295 hp (M97.21) from 2007 to 2008
- 987 Boxster RS 60 Spyder 3.4 - 303 hp (M97.22) from 2008
- 987 Boxster 2.9 - 255 hp (MA1.20) from 2009 to 2012
- 987 Boxster S 3.4 - 310 hp (MA1.21) from 2009 to 2012
- 987 Boxster Spyder 3.4 - 320 hp (MA1.21) from 2010 to 2012

Material: EPDM (ethylene-propylene-diene monomer) and PP (polypropylene)

The bellows are sold individually and are suitable for both left and right sides.

This lower steering column boot for DYANEs and Acadianes is true to the original.
This steering column bottom CV boot is made of rubber.

It keeps the passenger compartment watertight near the point where the steering column comes through the bulkhead.

For all E21 E30 models, except those fitted a steering shock absorberand/or a driver's airbag, except M3

This lower steering column boot for 2cv vans is faithful to the original.
This steering column bottom CV boot is made of rubber.

It keeps the passenger compartment watertight near the point where the steering column comes through the bulkhead.

For all Golf 5 and Golf 5 Plus

Steeringrack accordion bellows for Citroën ID.
Compatible with all models, this rubber bellows is suitable for manual or power steering racks.

Steering rack bellows for Porsche 911 and 912 :

-> Porsche 912 :
- 912 1.6 from 1965 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

Suitable for:
- A3 (8P) All models
- TT (8J) All models

Steering rack bellows left driver's side or right passenger's side for MINI II R50 Sedan, R53 Sedan Cooper S all years, R52 Convertible and R53 Sedan JCW from 05/2003 :

R50 Saloon :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 05/2003 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 05/2003 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 05/2003 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 05/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 05/2003 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Clamps and grease are not supplied.

This steering bar bellows is sold individually.

Suitable for :
- Golf 2
- Golf 3
- Passat 3
- Corrado

Steering rack bellows for Mazda MX5
For MX-5 NB and NBFL all models
Supplied with two clampsLeft or right sideSold individually

For E21:
- 315
- 316
- 318 i
- 320
- 323 i